diff mbox series

[v5,4/4] arm64: dts: ipq6018: add pwm node

Message ID 998a94922be5d0ec810bae6f4775ac9de79ff87b.1626176145.git.baruch@tkos.co.il (mailing list archive)
State New, archived
Headers show
Series [v5,1/4] arm64: dts: ipq6018: correct TCSR block area | expand

Commit Message

Baruch Siach July 13, 2021, 11:35 a.m. UTC
Describe the PWM block on IPQ6018.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
---
v5: Use qcom,pwm-regs for TCSR phandle instead of direct regs

v3: s/qcom,pwm-ipq6018/qcom,ipq6018-pwm/ (Rob Herring)
---
 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 72ac36c1be57..06b6676097e8 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -355,6 +355,15 @@  i2c_1: i2c@78b7000 { /* BLSP1 QUP2 */
 			status = "disabled";
 		};
 
+		pwm: pwm {
+			#pwm-cells = <2>;
+			compatible = "qcom,ipq6018-pwm";
+			qcom,pwm-regs = <&tcsr_q6 0xa010>;
+			clocks = <&gcc GCC_ADSS_PWM_CLK>;
+			clock-names = "core";
+			status = "disabled";
+		};
+
 		qpic_bam: dma-controller@7984000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x0 0x07984000 0x0 0x1a000>;