diff mbox

[30/47] ARM: dts: r8a7793: Reference both DMA controllers in IIC nodes

Message ID 9e4239aa0ce9ab6d2feb976fcbacd11c0b7a8622.1459732726.git.horms+renesas@verge.net.au (mailing list archive)
State New, archived
Headers show

Commit Message

Simon Horman April 4, 2016, 1:23 a.m. UTC 
From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7793.dtsi | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index b16b0cca638c..90925c5d14d0 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -470,8 +470,9 @@ 
 		reg = <0 0xe60b0000 0 0x425>;
 		interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7793_CLK_IICDVFS>;
-		dmas = <&dmac0 0x77>, <&dmac0 0x78>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+		       <&dmac1 0x77>, <&dmac1 0x78>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
@@ -483,8 +484,9 @@ 
 		reg = <0 0xe6500000 0 0x425>;
 		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7793_CLK_IIC0>;
-		dmas = <&dmac0 0x61>, <&dmac0 0x62>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+		       <&dmac1 0x61>, <&dmac1 0x62>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
@@ -496,8 +498,9 @@ 
 		reg = <0 0xe6510000 0 0x425>;
 		interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7793_CLK_IIC1>;
-		dmas = <&dmac0 0x65>, <&dmac0 0x66>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+		       <&dmac1 0x65>, <&dmac1 0x66>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};