| Message ID | BN6PR04MB0660AAB00F5D36E2FEE22DE8A3AE0@BN6PR04MB0660.namprd04.prod.outlook.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [01/13] arm: dts: s5pv210: Add helper define for sleep gpio config | expand |
On Sun, Apr 26, 2020 at 11:36:00AM -0700, Jonathan Bakker wrote: > The exynos-adc driver now supports the S5PV210, so add the DT > node so that devices can use it. > > Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> > --- > arch/arm/boot/dts/s5pv210.dtsi | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi > index 2ad642f51fd9..b3b6ad2889f9 100644 > --- a/arch/arm/boot/dts/s5pv210.dtsi > +++ b/arch/arm/boot/dts/s5pv210.dtsi > @@ -159,6 +159,18 @@ > }; > }; > > + adc: adc@126c0000 { > + compatible = "samsung,s5pv210-adc"; > + reg = <0xe1700000 0x1000>; reg does not match the node address. Run "make dtbs W=1" and be sure there are no new warnings. Best regards, Krzysztof > + interrupt-parent = <&vic2>; > + interrupts = <23>, <24>; > + clocks = <&clocks CLK_TSADC>; > + clock-names = "adc"; > + #io-channel-cells = <1>; > + io-channel-ranges; > + status = "disabled"; > + }; > + > spi0: spi@e1300000 { > compatible = "samsung,s5pv210-spi"; > reg = <0xe1300000 0x1000>; > -- > 2.20.1 >
Hi Krzysztof, On 2020-04-28 3:26 a.m., Krzysztof Kozlowski wrote: > On Sun, Apr 26, 2020 at 11:36:00AM -0700, Jonathan Bakker wrote: >> The exynos-adc driver now supports the S5PV210, so add the DT >> node so that devices can use it. >> >> Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> >> --- >> arch/arm/boot/dts/s5pv210.dtsi | 12 ++++++++++++ >> 1 file changed, 12 insertions(+) >> >> diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi >> index 2ad642f51fd9..b3b6ad2889f9 100644 >> --- a/arch/arm/boot/dts/s5pv210.dtsi >> +++ b/arch/arm/boot/dts/s5pv210.dtsi >> @@ -159,6 +159,18 @@ >> }; >> }; >> >> + adc: adc@126c0000 { >> + compatible = "samsung,s5pv210-adc"; >> + reg = <0xe1700000 0x1000>; > > reg does not match the node address. > > Run "make dtbs W=1" and be sure there are no new warnings. Thanks, will change for v2. > > Best regards, > Krzysztof > > >> + interrupt-parent = <&vic2>; >> + interrupts = <23>, <24>; >> + clocks = <&clocks CLK_TSADC>; >> + clock-names = "adc"; >> + #io-channel-cells = <1>; >> + io-channel-ranges; >> + status = "disabled"; >> + }; >> + >> spi0: spi@e1300000 { >> compatible = "samsung,s5pv210-spi"; >> reg = <0xe1300000 0x1000>; >> -- >> 2.20.1 >> Jonathan
diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi index 2ad642f51fd9..b3b6ad2889f9 100644 --- a/arch/arm/boot/dts/s5pv210.dtsi +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -159,6 +159,18 @@ }; }; + adc: adc@126c0000 { + compatible = "samsung,s5pv210-adc"; + reg = <0xe1700000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <23>, <24>; + clocks = <&clocks CLK_TSADC>; + clock-names = "adc"; + #io-channel-cells = <1>; + io-channel-ranges; + status = "disabled"; + }; + spi0: spi@e1300000 { compatible = "samsung,s5pv210-spi"; reg = <0xe1300000 0x1000>;
The exynos-adc driver now supports the S5PV210, so add the DT node so that devices can use it. Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> --- arch/arm/boot/dts/s5pv210.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+)