diff mbox series

[v2,3/5] ARM: dts: s5pv210: Adjust memory reg entries to match spec

Message ID CY4PR04MB05677849A13F41BF603906DFCB1C9@CY4PR04MB0567.namprd04.prod.outlook.com (mailing list archive)
State New, archived
Headers show
Series ARM: dts: s5pv210: Bugfixes, features, and improvements | expand

Commit Message

Jonathan Bakker March 27, 2022, 6:08 p.m. UTC
The reg property of memory nodes should have pairs of offset, size;
not all memory banks lumped in as one.

Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
---
Changes in v2
- Adjusted so that there is still one memory node, but the reg
  entries are split into multiple pairs rather than having multiple
  memory nodes
---
 arch/arm/boot/dts/s5pv210-aquila.dts | 3 +--
 arch/arm/boot/dts/s5pv210-aries.dtsi | 6 +++---
 arch/arm/boot/dts/s5pv210-goni.dts   | 6 +++---
 3 files changed, 7 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts
index 6423348034b6..79014a624e4a 100644
--- a/arch/arm/boot/dts/s5pv210-aquila.dts
+++ b/arch/arm/boot/dts/s5pv210-aquila.dts
@@ -29,8 +29,7 @@ 
 
 	memory@30000000 {
 		device_type = "memory";
-		reg = <0x30000000 0x05000000
-			0x40000000 0x18000000>;
+		reg = <0x30000000 0x05000000>, <0x40000000 0x18000000>;
 	};
 
 	pmic_ap_clk: clock-0 {
diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
index cbd378ac4e18..116c507da028 100644
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -24,9 +24,9 @@ 
 
 	memory@30000000 {
 		device_type = "memory";
-		reg = <0x30000000 0x05000000
-			0x40000000 0x10000000
-			0x50000000 0x08000000>;
+		reg = <0x30000000 0x05000000>,
+			<0x40000000 0x10000000>,
+			<0x50000000 0x08000000>;
 	};
 
 	reserved-memory {
diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts
index c6f39147cb96..d32f42dd1bf5 100644
--- a/arch/arm/boot/dts/s5pv210-goni.dts
+++ b/arch/arm/boot/dts/s5pv210-goni.dts
@@ -30,9 +30,9 @@ 
 
 	memory@30000000 {
 		device_type = "memory";
-		reg = <0x30000000 0x05000000
-			0x40000000 0x10000000
-			0x50000000 0x08000000>;
+		reg = <0x30000000 0x05000000>,
+			<0x40000000 0x10000000>,
+			<0x50000000 0x08000000>;
 	};
 
 	pmic_ap_clk: clock-0 {