@@ -644,7 +644,7 @@
};
&i2s0 {
- dmas = <&pdma0 9>, <&pdma0 10>, <&pdma0 11>;
+ dmas = <&pdma0 10>, <&pdma0 9>, <&pdma0 11>;
status = "okay";
};
@@ -239,8 +239,8 @@
reg = <0xeee30000 0x1000>;
interrupt-parent = <&vic2>;
interrupts = <16>;
- dma-names = "rx", "tx", "tx-sec";
- dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
+ dma-names = "tx", "rx", "tx-sec";
+ dmas = <&pdma1 10>, <&pdma1 9>, <&pdma1 11>;
clock-names = "iis",
"i2s_opclk0",
"i2s_opclk1";
@@ -250,7 +250,7 @@
samsung,idma-addr = <0xc0010000>;
pinctrl-names = "default";
pinctrl-0 = <&i2s0_bus>;
- #sound-dai-cells = <0>;
+ #sound-dai-cells = <1>;
status = "disabled";
};
@@ -259,13 +259,13 @@
reg = <0xe2100000 0x1000>;
interrupt-parent = <&vic2>;
interrupts = <17>;
- dma-names = "rx", "tx";
- dmas = <&pdma1 12>, <&pdma1 13>;
+ dma-names = "tx", "rx";
+ dmas = <&pdma1 13>, <&pdma1 12>;
clock-names = "iis", "i2s_opclk0";
clocks = <&clocks CLK_I2S1>, <&clocks SCLK_AUDIO1>;
pinctrl-names = "default";
pinctrl-0 = <&i2s1_bus>;
- #sound-dai-cells = <0>;
+ #sound-dai-cells = <1>;
status = "disabled";
};
@@ -274,13 +274,13 @@
reg = <0xe2a00000 0x1000>;
interrupt-parent = <&vic2>;
interrupts = <18>;
- dma-names = "rx", "tx";
- dmas = <&pdma1 14>, <&pdma1 15>;
+ dma-names = "tx", "rx";
+ dmas = <&pdma1 15>, <&pdma1 14>;
clock-names = "iis", "i2s_opclk0";
clocks = <&clocks CLK_I2S2>, <&clocks SCLK_AUDIO2>;
pinctrl-names = "default";
pinctrl-0 = <&i2s2_bus>;
- #sound-dai-cells = <0>;
+ #sound-dai-cells = <1>;
status = "disabled";
};
Based on the device tree spec, clocks should be ordered tx/rx. Re-order from rx/tx to avoid warnings when running make dtbs_check Additionally, the number of #sound-dai-cells should be 1, not 0 Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> --- arch/arm/boot/dts/s5pv210-aries.dtsi | 2 +- arch/arm/boot/dts/s5pv210.dtsi | 18 +++++++++--------- 2 files changed, 10 insertions(+), 10 deletions(-)