@@ -182,11 +182,11 @@ ENDPROC(cpu_sa1100_do_suspend)
ENTRY(cpu_sa1100_do_resume)
ldmia r0, {r4 - r7} @ load cp regs
- mov r1, #0
- mcr p15, 0, r1, c8, c7, 0 @ flush I+D TLBs
- mcr p15, 0, r1, c7, c7, 0 @ flush I&D cache
- mcr p15, 0, r1, c9, c0, 0 @ invalidate RB
- mcr p15, 0, r1, c9, c0, 5 @ allow user space to use RB
+ mov ip, #0
+ mcr p15, 0, ip, c8, c7, 0 @ flush I+D TLBs
+ mcr p15, 0, ip, c7, c7, 0 @ flush I&D cache
+ mcr p15, 0, ip, c9, c0, 0 @ invalidate RB
+ mcr p15, 0, ip, c9, c0, 5 @ allow user space to use RB
mcr p15, 0, r4, c3, c0, 0 @ domain ID
mcr p15, 0, r5, c2, c0, 0 @ translation table base addr
@@ -406,7 +406,7 @@ ENTRY(cpu_xsc3_set_pte_ext)
.align
.globl cpu_xsc3_suspend_size
-.equ cpu_xsc3_suspend_size, 4 * 8
+.equ cpu_xsc3_suspend_size, 4 * 7
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_xsc3_do_suspend)
stmfd sp!, {r4 - r10, lr}
@@ -418,12 +418,12 @@ ENTRY(cpu_xsc3_do_suspend)
mrc p15, 0, r9, c1, c0, 1 @ auxiliary control reg
mrc p15, 0, r10, c1, c0, 0 @ control reg
bic r4, r4, #2 @ clear frequency change bit
- stmia r0, {r1, r4 - r10} @ store v:p offset + cp regs
+ stmia r0, {r4 - r10} @ store cp regs
ldmia sp!, {r4 - r10, pc}
ENDPROC(cpu_xsc3_do_suspend)
ENTRY(cpu_xsc3_do_resume)
- ldmia r0, {r1, r4 - r10} @ load v:p offset + cp regs
+ ldmia r0, {r4 - r10} @ load cp regs
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB
mcr p15, 0, ip, c7, c10, 4 @ drain write (&fill) buffer
r1 stores the v:p offset from the CPU invariant resume code, and is expected to be preserved by the CPU specific code. Overwriting it is not a good idea. We've managed to get away with it on sa1100 platforms because most happen to have PHYS_OFFSET == PAGE_OFFSET, but that may not be the case depending on kernel configuration. So fix this latent bug. This fixes xsc3 as well which was saving and restoring this register independently. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/mm/proc-sa1100.S | 10 +++++----- arch/arm/mm/proc-xsc3.S | 6 +++--- 2 files changed, 8 insertions(+), 8 deletions(-)