@@ -451,6 +451,7 @@ choice
config DEBUG_PICOXCELL_UART
depends on ARCH_PICOXCELL
bool "Use PicoXcell UART for low-level debug"
+ select DEBUG_UART_8250
help
Say Y here if you want kernel low-level debugging support
on PicoXcell based platforms.
@@ -593,6 +594,7 @@ choice
config DEBUG_SOCFPGA_UART
depends on ARCH_SOCFPGA
bool "Use SOCFPGA UART for low-level debug"
+ select DEBUG_UART_8250
help
Say Y here if you want kernel low-level debugging support
on SOCFPGA based platforms.
@@ -851,9 +853,7 @@ config DEBUG_LL_INCLUDE
default "debug/nomadik.S" if DEBUG_NOMADIK_UART
default "debug/nspire.S" if DEBUG_NSPIRE_CX_UART
default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
- default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
- default "debug/socfpga.S" if DEBUG_SOCFPGA_UART
default "debug/sti.S" if DEBUG_STI_UART
default "debug/tegra.S" if DEBUG_TEGRA_UART
default "debug/u300.S" if DEBUG_U300_UART
@@ -886,6 +886,7 @@ config DEBUG_UART_PHYS
default 0x40100000 if DEBUG_PXA_UART1
default 0x42000000 if ARCH_GEMINI
default 0x7c0003f8 if FOOTBRIDGE
+ default 0x80230000 if DEBUG_PICOXCELL_UART
default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART
default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
@@ -897,6 +898,7 @@ config DEBUG_UART_PHYS
default 0xf1012000 if ARCH_DOVE || ARCH_KIRKWOOD || ARCH_MV78XX0 || \
ARCH_ORION5X
default 0xfe800000 if ARCH_IOP32X
+ default 0xffc02000 if DEBUG_SOCFPGA_UART
default 0xffd82340 if ARCH_IOP13XX
default 0xfffff700 if ARCH_IOP33X
depends on DEBUG_UART_8250
@@ -915,6 +917,7 @@ config DEBUG_UART_VIRT
default 0xfe012000 if ARCH_ORION5X
default 0xfe017000 if DEBUG_MMP_UART2
default 0xfe018000 if DEBUG_MMP_UART3
+ default 0xfe230000 if DEBUG_PICOXCELL_UART
default 0xfe800000 if ARCH_IOP32X
default 0xfeb24000 if DEBUG_RK3X_UART0
default 0xfeb26000 if DEBUG_RK3X_UART1
@@ -922,6 +925,7 @@ config DEBUG_UART_VIRT
default 0xfed60000 if DEBUG_RK29_UART0
default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
+ default 0xfec02000 if DEBUG_SOCFPGA_UART
default 0xfed12000 if ARCH_KIRKWOOD
default 0xfee003f8 if FOOTBRIDGE
default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART
@@ -937,6 +941,12 @@ config DEBUG_UART_8250_SHIFT
default 0 if FOOTBRIDGE || ARCH_IOP32X
default 2
+config DEBUG_UART_8250_WORD
+ bool "Use 32-bit accesses for 8250 UART"
+ depends on DEBUG_UART_8250
+ depends on DEBUG_UART_8250_SHIFT >= 2
+ default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART
+
config DEBUG_UART_8250_FLOW_CONTROL
bool "Enable flow control for 8250 UART"
depends on DEBUG_UART_8250
@@ -14,14 +14,32 @@
ldr \rv, =CONFIG_DEBUG_UART_VIRT
.endm
+#ifdef CONFIG_DEBUG_UART_8250_WORD
+ .macro store, rd, rx:vararg
+ str \rd, \rx
+ .endm
+
+ .macro load, rd, rx:vararg
+ ldr \rd, \rx
+ .endm
+#else
+ .macro store, rd, rx:vararg
+ strb \rd, \rx
+ .endm
+
+ .macro load, rd, rx:vararg
+ ldrb \rd, \rx
+ .endm
+#endif
+
#define UART_SHIFT CONFIG_DEBUG_UART_8250_SHIFT
.macro senduart,rd,rx
- strb \rd, [\rx, #UART_TX << UART_SHIFT]
+ store \rd, [\rx, #UART_TX << UART_SHIFT]
.endm
.macro busyuart,rd,rx
-1002: ldrb \rd, [\rx, #UART_LSR << UART_SHIFT]
+1002: load \rd, [\rx, #UART_LSR << UART_SHIFT]
and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
bne 1002b
@@ -29,7 +47,7 @@
.macro waituart,rd,rx
#ifdef CONFIG_DEBUG_UART_8250_FLOW_CONTROL
-1001: ldrb \rd, [\rx, #UART_MSR << UART_SHIFT]
+1001: load \rd, [\rx, #UART_MSR << UART_SHIFT]
tst \rd, #UART_MSR_CTS
beq 1001b
#endif
deleted file mode 100644
@@ -1,27 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit
- * accesses to the 8250.
- */
-
-#include <linux/serial_reg.h>
-
- .macro senduart,rd,rx
- str \rd, [\rx, #UART_TX << UART_SHIFT]
- .endm
-
- .macro busyuart,rd,rx
-1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT]
- and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
- teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
- bne 1002b
- .endm
-
- /* The UART's don't have any flow control IO's wired up. */
- .macro waituart,rd,rx
- .endm
deleted file mode 100644
@@ -1,19 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#define UART_SHIFT 2
-#define PICOXCELL_UART1_BASE 0x80230000
-#define PHYS_TO_IO(x) (((x) & 0x00ffffff) | 0xfe000000)
-
- .macro addruart, rp, rv, tmp
- ldr \rv, =PHYS_TO_IO(PICOXCELL_UART1_BASE)
- ldr \rp, =PICOXCELL_UART1_BASE
- .endm
-
-#include "8250_32.S"
deleted file mode 100644
@@ -1,21 +0,0 @@
-/*
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define UART_SHIFT 2
-#define DEBUG_LL_UART_OFFSET 0x00002000
-
- .macro addruart, rp, rv, tmp
- mov \rp, #DEBUG_LL_UART_OFFSET
- orr \rp, \rp, #0x00c00000
- orr \rv, \rp, #0xfe000000 @ virtual base
- orr \rp, \rp, #0xff000000 @ physical base
- .endm
-
-#include "8250_32.S"
-
Add 32-bit word access support to debug/8250.S and convert Picoxcell and SoCFPGA to this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/Kconfig.debug | 14 ++++++++++++-- arch/arm/include/debug/8250.S | 24 +++++++++++++++++++++--- arch/arm/include/debug/8250_32.S | 27 --------------------------- arch/arm/include/debug/picoxcell.S | 19 ------------------- arch/arm/include/debug/socfpga.S | 21 --------------------- 5 files changed, 33 insertions(+), 72 deletions(-) delete mode 100644 arch/arm/include/debug/8250_32.S delete mode 100644 arch/arm/include/debug/picoxcell.S delete mode 100644 arch/arm/include/debug/socfpga.S