@@ -52,11 +52,6 @@
linux,rc-map-name = "rc-rc6-mce";
};
- usdhc2_pwrseq: usdhc2-pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
- };
-
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
@@ -73,6 +68,18 @@
regulator-always-on;
};
+ v_sd: regulator-v-sd {
+ compatible = "regulator-fixed";
+ gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hummingboard2_vmmc>;
+ regulator-boot-on;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "v_sd";
+ startup-delay-us = <1000>;
+ };
+
reg_usbh1_vbus: regulator-usb-h1-vbus {
compatible = "regulator-fixed";
enable-active-high;
@@ -391,7 +398,6 @@
fsl,pins = <
MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071
MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071
- MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
>;
};
@@ -428,6 +434,12 @@
>;
};
+ pinctrl_hummingboard2_vmmc: hummingboard2-vmmc {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
+ >;
+ };
+
pinctrl_hummingboard2_usdhc3: hummingboard2-usdhc3 {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
@@ -515,7 +527,7 @@
&pinctrl_hummingboard2_usdhc2_aux
&pinctrl_hummingboard2_usdhc2_200mhz
>;
- mmc-pwrseq = <&usdhc2_pwrseq>;
+ vmmc-supply = <&v_sd>;
cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
status = "okay";
};
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> --- arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi | 26 +++++++++++++++++++------- 1 file changed, 19 insertions(+), 7 deletions(-)