diff mbox series

[RFC,net-next,11/12] net: mtk_eth_soc: convert code structure to suit split PCS support

Message ID E1nc6lC-004ikc-NR@rmk-PC.armlinux.org.uk (mailing list archive)
State New, archived
Headers show
Series mtk_eth_soc phylink updates | expand

Commit Message

Russell King (Oracle) April 6, 2022, 2:35 p.m. UTC 
Provide a mtk_pcs structure which encapsulates everything that the PCS
functions need (the regmap and ana_rgc3 offset), and use this in the
PCS functions. Provide shim functions to convert from the existing
"mtk_sgmii_*" interface to the converted PCS functions.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/ethernet/mediatek/mtk_eth_soc.h |  15 ++-
 drivers/net/ethernet/mediatek/mtk_sgmii.c   | 121 +++++++++++---------
 2 files changed, 78 insertions(+), 58 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index 96f90e9fb9dd..7de860c9d2e3 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -861,16 +861,23 @@  struct mtk_soc_data {
 /* currently no SoC has more than 2 macs */
 #define MTK_MAX_DEVS			2
 
-/* struct mtk_sgmii -  This is the structure holding sgmii regmap and its
- *                     characteristics
+/* struct mtk_pcs -    This structure holds each sgmii regmap and associated
+ *                     data
  * @regmap:            The register map pointing at the range used to setup
  *                     SGMII modes
  * @ana_rgc3:          The offset refers to register ANA_RGC3 related to regmap
  */
+struct mtk_pcs {
+	struct regmap	*regmap;
+	u32             ana_rgc3;
+};
 
+/* struct mtk_sgmii -  This is the structure holding sgmii regmap and its
+ *                     characteristics
+ * @pcs                Array of individual PCS structures
+ */
 struct mtk_sgmii {
-	struct regmap   *regmap[MTK_MAX_DEVS];
-	u32             ana_rgc3;
+	struct mtk_pcs	pcs[MTK_MAX_DEVS];
 };
 
 /* struct mtk_eth -	This is the main datasructure for holding the state
diff --git a/drivers/net/ethernet/mediatek/mtk_sgmii.c b/drivers/net/ethernet/mediatek/mtk_sgmii.c
index 57925910cf80..aac71eb4ac7c 100644
--- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
+++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
@@ -9,89 +9,71 @@ 
 
 #include <linux/mfd/syscon.h>
 #include <linux/of.h>
+#include <linux/phylink.h>
 #include <linux/regmap.h>
 
 #include "mtk_eth_soc.h"
 
-int mtk_sgmii_init(struct mtk_sgmii *ss, struct device_node *r, u32 ana_rgc3)
-{
-	struct device_node *np;
-	int i;
-
-	ss->ana_rgc3 = ana_rgc3;
-
-	for (i = 0; i < MTK_MAX_DEVS; i++) {
-		np = of_parse_phandle(r, "mediatek,sgmiisys", i);
-		if (!np)
-			break;
-
-		ss->regmap[i] = syscon_node_to_regmap(np);
-		if (IS_ERR(ss->regmap[i]))
-			return PTR_ERR(ss->regmap[i]);
-	}
-
-	return 0;
-}
-
 /* For SGMII interface mode */
-static int mtk_sgmii_setup_mode_an(struct mtk_sgmii *ss, int id)
+static int mtk_pcs_setup_mode_an(struct mtk_pcs *mpcs)
 {
 	unsigned int val;
 
-	if (!ss->regmap[id])
+	if (!mpcs->regmap)
 		return -EINVAL;
 
 	/* Setup the link timer and QPHY power up inside SGMIISYS */
-	regmap_write(ss->regmap[id], SGMSYS_PCS_LINK_TIMER,
+	regmap_write(mpcs->regmap, SGMSYS_PCS_LINK_TIMER,
 		     SGMII_LINK_TIMER_DEFAULT);
 
-	regmap_read(ss->regmap[id], SGMSYS_SGMII_MODE, &val);
+	regmap_read(mpcs->regmap, SGMSYS_SGMII_MODE, &val);
 	val |= SGMII_REMOTE_FAULT_DIS;
-	regmap_write(ss->regmap[id], SGMSYS_SGMII_MODE, val);
+	regmap_write(mpcs->regmap, SGMSYS_SGMII_MODE, val);
 
-	regmap_read(ss->regmap[id], SGMSYS_PCS_CONTROL_1, &val);
+	regmap_read(mpcs->regmap, SGMSYS_PCS_CONTROL_1, &val);
 	val |= SGMII_AN_RESTART;
-	regmap_write(ss->regmap[id], SGMSYS_PCS_CONTROL_1, val);
+	regmap_write(mpcs->regmap, SGMSYS_PCS_CONTROL_1, val);
 
-	regmap_read(ss->regmap[id], SGMSYS_QPHY_PWR_STATE_CTRL, &val);
+	regmap_read(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, &val);
 	val &= ~SGMII_PHYA_PWD;
-	regmap_write(ss->regmap[id], SGMSYS_QPHY_PWR_STATE_CTRL, val);
+	regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, val);
 
 	return 0;
+
 }
 
 /* For 1000BASE-X and 2500BASE-X interface modes, which operate at a
  * fixed speed.
  */
-static int mtk_sgmii_setup_mode_force(struct mtk_sgmii *ss, int id,
-				      phy_interface_t interface)
+static int mtk_pcs_setup_mode_force(struct mtk_pcs *mpcs,
+				    phy_interface_t interface)
 {
 	unsigned int val;
 
-	if (!ss->regmap[id])
+	if (!mpcs->regmap)
 		return -EINVAL;
 
-	regmap_read(ss->regmap[id], ss->ana_rgc3, &val);
+	regmap_read(mpcs->regmap, mpcs->ana_rgc3, &val);
 	val &= ~RG_PHY_SPEED_MASK;
 	if (interface == PHY_INTERFACE_MODE_2500BASEX)
 		val |= RG_PHY_SPEED_3_125G;
-	regmap_write(ss->regmap[id], ss->ana_rgc3, val);
+	regmap_write(mpcs->regmap, mpcs->ana_rgc3, val);
 
 	/* Disable SGMII AN */
-	regmap_read(ss->regmap[id], SGMSYS_PCS_CONTROL_1, &val);
+	regmap_read(mpcs->regmap, SGMSYS_PCS_CONTROL_1, &val);
 	val &= ~SGMII_AN_ENABLE;
-	regmap_write(ss->regmap[id], SGMSYS_PCS_CONTROL_1, val);
+	regmap_write(mpcs->regmap, SGMSYS_PCS_CONTROL_1, val);
 
 	/* Set the speed etc but leave the duplex unchanged */
-	regmap_read(ss->regmap[id], SGMSYS_SGMII_MODE, &val);
+	regmap_read(mpcs->regmap, SGMSYS_SGMII_MODE, &val);
 	val &= SGMII_DUPLEX_FULL | ~SGMII_IF_MODE_MASK;
 	val |= SGMII_SPEED_1000;
-	regmap_write(ss->regmap[id], SGMSYS_SGMII_MODE, val);
+	regmap_write(mpcs->regmap, SGMSYS_SGMII_MODE, val);
 
 	/* Release PHYA power down state */
-	regmap_read(ss->regmap[id], SGMSYS_QPHY_PWR_STATE_CTRL, &val);
+	regmap_read(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, &val);
 	val &= ~SGMII_PHYA_PWD;
-	regmap_write(ss->regmap[id], SGMSYS_QPHY_PWR_STATE_CTRL, val);
+	regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, val);
 
 	return 0;
 }
@@ -99,44 +81,75 @@  static int mtk_sgmii_setup_mode_force(struct mtk_sgmii *ss, int id,
 int mtk_sgmii_config(struct mtk_sgmii *ss, int id, unsigned int mode,
 		     phy_interface_t interface)
 {
+	struct mtk_pcs *mpcs = &ss->pcs[id];
 	int err = 0;
 
 	/* Setup SGMIISYS with the determined property */
 	if (interface != PHY_INTERFACE_MODE_SGMII)
-		err = mtk_sgmii_setup_mode_force(ss, id, interface);
+		err = mtk_pcs_setup_mode_force(mpcs, interface);
 	else if (phylink_autoneg_inband(mode))
-		err = mtk_sgmii_setup_mode_an(ss, id);
+		err = mtk_pcs_setup_mode_an(mpcs);
 
 	return err;
 }
 
-/* For 1000BASE-X and 2500BASE-X interface modes */
-void mtk_sgmii_link_up(struct mtk_sgmii *ss, int id, int speed, int duplex)
+static void mtk_pcs_restart_an(struct mtk_pcs *mpcs)
+{
+	unsigned int val;
+
+	if (!mpcs->regmap)
+		return;
+
+	regmap_read(mpcs->regmap, SGMSYS_PCS_CONTROL_1, &val);
+	val |= SGMII_AN_RESTART;
+	regmap_write(mpcs->regmap, SGMSYS_PCS_CONTROL_1, val);
+}
+
+static void mtk_pcs_link_up(struct mtk_pcs *mpcs, int speed, int duplex)
 {
 	unsigned int val;
 
 	/* SGMII force duplex setting */
-	regmap_read(ss->regmap[id], SGMSYS_SGMII_MODE, &val);
+	regmap_read(mpcs->regmap, SGMSYS_SGMII_MODE, &val);
 	val &= ~SGMII_DUPLEX_FULL;
 	if (duplex == DUPLEX_FULL)
 		val |= SGMII_DUPLEX_FULL;
 
-	regmap_write(ss->regmap[id], SGMSYS_SGMII_MODE, val);
+	regmap_write(mpcs->regmap, SGMSYS_SGMII_MODE, val);
+}
+
+/* For 1000BASE-X and 2500BASE-X interface modes */
+void mtk_sgmii_link_up(struct mtk_sgmii *ss, int id, int speed, int duplex)
+{
+	mtk_pcs_link_up(&ss->pcs[id], speed, duplex);
+}
+
+int mtk_sgmii_init(struct mtk_sgmii *ss, struct device_node *r, u32 ana_rgc3)
+{
+	struct device_node *np;
+	int i;
+
+	for (i = 0; i < MTK_MAX_DEVS; i++) {
+		np = of_parse_phandle(r, "mediatek,sgmiisys", i);
+		if (!np)
+			break;
+
+		ss->pcs[i].ana_rgc3 = ana_rgc3;
+		ss->pcs[i].regmap = syscon_node_to_regmap(np);
+		if (IS_ERR(ss->pcs[i].regmap))
+			return PTR_ERR(ss->pcs[i].regmap);
+	}
+
+	return 0;
 }
 
 void mtk_sgmii_restart_an(struct mtk_eth *eth, int mac_id)
 {
-	struct mtk_sgmii *ss = eth->sgmii;
-	unsigned int val, sid;
+	unsigned int sid;
 
 	/* Decide how GMAC and SGMIISYS be mapped */
 	sid = (MTK_HAS_CAPS(eth->soc->caps, MTK_SHARED_SGMII)) ?
 	       0 : mac_id;
 
-	if (!ss->regmap[sid])
-		return;
-
-	regmap_read(ss->regmap[sid], SGMSYS_PCS_CONTROL_1, &val);
-	val |= SGMII_AN_RESTART;
-	regmap_write(ss->regmap[sid], SGMSYS_PCS_CONTROL_1, val);
+	mtk_pcs_restart_an(&eth->sgmii->pcs[sid]);
 }