@@ -21,6 +21,18 @@ enum {
MLO_AN_FIXED, /* Fixed-link mode */
MLO_AN_INBAND, /* In-band protocol */
+ /* PCS "negotiation" mode.
+ * PHYLINK_PCS_NEG_NONE - protocol has no inband capability
+ * PHYLINK_PCS_NEG_OUTBAND - some out of band or fixed link setting
+ * PHYLINK_PCS_NEG_INBAND_DISABLED - inband mode disabled, e.g.
+ * 1000base-X with autoneg off
+ * PHYLINK_PCS_NEG_INBAND_ENABLED - inband mode enabled
+ */
+ PHYLINK_PCS_NEG_NONE = 0,
+ PHYLINK_PCS_NEG_OUTBAND,
+ PHYLINK_PCS_NEG_INBAND_DISABLED,
+ PHYLINK_PCS_NEG_INBAND_ENABLED,
+
/* MAC_SYM_PAUSE and MAC_ASYM_PAUSE are used when configuring our
* autonegotiation advertisement. They correspond to the PAUSE and
* ASM_DIR bits defined by 802.3, respectively.
@@ -79,6 +91,70 @@ static inline bool phylink_autoneg_inband(unsigned int mode)
return mode == MLO_AN_INBAND;
}
+/**
+ * phylink_pcs_neg_mode() - helper to determine PCS inband mode
+ * @mode: one of %MLO_AN_FIXED, %MLO_AN_PHY, %MLO_AN_INBAND.
+ * @interface: interface mode to be used
+ * @advertising: adertisement ethtool link mode mask
+ *
+ * Determines the negotiation mode to be used by the PCS, and returns
+ * one of:
+ * %PHYLINK_PCS_NEG_NONE: interface mode does not support inband
+ * %PHYLINK_PCS_NEG_OUTBAND: an out of band mode (e.g. reading the PHY)
+ * will be used.
+ * %PHYLINK_PCS_NEG_INBAND_DISABLED: inband mode selected but autoneg disabled
+ * %PHYLINK_PCS_NEG_INBAND_ENABLED: inband mode selected and autoneg enabled
+ *
+ * Note: this is for cases where the PCS itself is involved in negotiation
+ * (e.g. Clause 37, SGMII and similar) not Clause 73.
+ */
+static inline unsigned int phylink_pcs_neg_mode(unsigned int mode,
+ phy_interface_t interface,
+ const unsigned long *advertising)
+{
+ unsigned int neg_mode;
+
+ switch (interface) {
+ case PHY_INTERFACE_MODE_SGMII:
+ case PHY_INTERFACE_MODE_QSGMII:
+ case PHY_INTERFACE_MODE_QUSGMII:
+ case PHY_INTERFACE_MODE_USXGMII:
+ /* These protocols are designed for use with a PHY which
+ * communicates its negotiation result back to the MAC via
+ * inband communication. Note: there exist PHYs that run
+ * with SGMII but do not send the inband data.
+ */
+ if (!phylink_autoneg_inband(mode))
+ neg_mode = PHYLINK_PCS_NEG_OUTBAND;
+ else
+ neg_mode = PHYLINK_PCS_NEG_INBAND_ENABLED;
+ break;
+
+ case PHY_INTERFACE_MODE_1000BASEX:
+ case PHY_INTERFACE_MODE_2500BASEX:
+ /* 1000base-X is designed for use media-side for Fibre
+ * connections, and thus the Autoneg bit needs to be
+ * taken into account. We also do this for 2500base-X
+ * as well, but drivers may not support this, so may
+ * need to override this.
+ */
+ if (!phylink_autoneg_inband(mode))
+ neg_mode = PHYLINK_PCS_NEG_OUTBAND;
+ else if (linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
+ advertising))
+ neg_mode = PHYLINK_PCS_NEG_INBAND_ENABLED;
+ else
+ neg_mode = PHYLINK_PCS_NEG_INBAND_DISABLED;
+ break;
+
+ default:
+ neg_mode = PHYLINK_PCS_NEG_NONE;
+ break;
+ }
+
+ return neg_mode;
+}
+
/**
* struct phylink_link_state - link state structure
* @advertising: ethtool bitmask containing advertised link modes
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> --- include/linux/phylink.h | 76 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 76 insertions(+)