@@ -717,6 +717,20 @@ static int marvell_config_aneg_fiber(struct phy_device *phydev)
return genphy_check_and_restart_aneg(phydev, changed);
}
+static unsigned int m88e1111_inband_caps(struct phy_device *phydev,
+ phy_interface_t interface)
+{
+ /* In 1000base-X and SGMII modes, the inband mode can be changed
+ * through the Fibre page BMCR ANENABLE bit.
+ */
+ if (interface == PHY_INTERFACE_MODE_1000BASEX ||
+ interface == PHY_INTERFACE_MODE_SGMII)
+ return LINK_INBAND_DISABLE | LINK_INBAND_ENABLE |
+ LINK_INBAND_BYPASS;
+
+ return 0;
+}
+
static int m88e1111_config_aneg(struct phy_device *phydev)
{
int extsr = phy_read(phydev, MII_M1111_PHY_EXT_SR);
@@ -3677,6 +3691,7 @@ static struct phy_driver marvell_drivers[] = {
.name = "Marvell 88E1112",
/* PHY_GBIT_FEATURES */
.probe = marvell_probe,
+ .inband_caps = m88e1111_inband_caps,
.config_init = m88e1112_config_init,
.config_aneg = marvell_config_aneg,
.config_intr = marvell_config_intr,
@@ -3698,6 +3713,7 @@ static struct phy_driver marvell_drivers[] = {
/* PHY_GBIT_FEATURES */
.flags = PHY_POLL_CABLE_TEST,
.probe = marvell_probe,
+ .inband_caps = m88e1111_inband_caps,
.config_init = m88e1111gbe_config_init,
.config_aneg = m88e1111_config_aneg,
.read_status = marvell_read_status,
@@ -3721,6 +3737,7 @@ static struct phy_driver marvell_drivers[] = {
.name = "Marvell 88E1111 (Finisar)",
/* PHY_GBIT_FEATURES */
.probe = marvell_probe,
+ .inband_caps = m88e1111_inband_caps,
.config_init = m88e1111gbe_config_init,
.config_aneg = m88e1111_config_aneg,
.read_status = marvell_read_status,
Provide an implementation for phy_inband_caps() for Marvell PHYs used on SFP modules, so that phylink knows the PHYs capabilities. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> --- drivers/net/phy/marvell.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)