diff mbox series

[RFC,net-next,07/16] net: phy: add phy_config_inband()

Message ID E1tFroR-005xQE-Ab@rmk-PC.armlinux.org.uk (mailing list archive)
State New
Headers show
Series net: add negotiation of in-band capabilities | expand

Commit Message

Russell King (Oracle) Nov. 26, 2024, 9:24 a.m. UTC 
Add a method to configure the PHY's in-band mode.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/phy/phy.c | 31 +++++++++++++++++++++++++++++++
 include/linux/phy.h   |  6 ++++++
 2 files changed, 37 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index d7b34f8ae415..3e4922839895 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -1026,6 +1026,37 @@  unsigned int phy_inband_caps(struct phy_device *phydev,
 }
 EXPORT_SYMBOL_GPL(phy_inband_caps);
 
+/**
+ * phy_config_inband - configure the desired PHY in-band mode
+ * @phydev: the phy_device struct
+ * @modes: in-band modes to configure
+ *
+ * Description: disables, enables or enables-with-bypass in-band signalling
+ *   between the PHY and host system.
+ *
+ * Returns: zero on success, or negative errno value.
+ */
+int phy_config_inband(struct phy_device *phydev, unsigned int modes)
+{
+	int err;
+
+	if (!!(modes & LINK_INBAND_DISABLE) +
+	    !!(modes & LINK_INBAND_ENABLE) +
+	    !!(modes & LINK_INBAND_BYPASS) != 1)
+		return -EINVAL;
+
+	mutex_lock(&phydev->lock);
+	if (!phydev->drv)
+		err = -EIO;
+	else if (!phydev->drv->config_inband)
+		err = -EOPNOTSUPP;
+	else
+		err = phydev->drv->config_inband(phydev, modes);
+	mutex_unlock(&phydev->lock);
+
+	return err;
+}
+
 /**
  * _phy_start_aneg - start auto-negotiation for this PHY device
  * @phydev: the phy_device struct
diff --git a/include/linux/phy.h b/include/linux/phy.h
index ff60c4785e11..6c1887d1edbf 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -980,6 +980,11 @@  struct phy_driver {
 	unsigned int (*inband_caps)(struct phy_device *phydev,
 				    phy_interface_t interface);
 
+	/**
+	 * @config_inband: configure in-band mode for the PHY
+	 */
+	int (*config_inband)(struct phy_device *phydev, unsigned int modes);
+
 	/**
 	 * @get_rate_matching: Get the supported type of rate matching for a
 	 * particular phy interface. This is used by phy consumers to determine
@@ -1844,6 +1849,7 @@  int phy_start_aneg(struct phy_device *phydev);
 int phy_aneg_done(struct phy_device *phydev);
 unsigned int phy_inband_caps(struct phy_device *phydev,
 			     phy_interface_t interface);
+int phy_config_inband(struct phy_device *phydev, unsigned int modes);
 int phy_speed_down(struct phy_device *phydev, bool sync);
 int phy_speed_up(struct phy_device *phydev);
 bool phy_check_valid(int speed, int duplex, unsigned long *features);