diff mbox series

[net-next,2/7] net: stmmac: starfive: use PHY capability for TX clock stop

Message ID E1trIA5-005ntQ-KM@rmk-PC.armlinux.org.uk (mailing list archive)
State New
Headers show
Series [net-next,1/7] net: stmmac: allow platforms to use PHY tx clock stop capability | expand

Commit Message

Russell King (Oracle) March 9, 2025, 3:01 p.m. UTC 
Whether the MII transmit clock can be stopped is primarily a property
of the PHY (there is a capability bit that should be checked first.)
Whether the MAC is capable of stopping the transmit clock is a separate
issue, but this is already handled by the core DesignWare MAC code.

Add the flag to allow the stmmac core to use the PHY capability.

Cc: Samin Guo <samin.guo@starfivetech.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c | 1 +
 1 file changed, 1 insertion(+)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c
index 5e31cb3bb4b8..2013d7477eb7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c
@@ -124,6 +124,7 @@  static int starfive_dwmac_probe(struct platform_device *pdev)
 		plat_dat->set_clk_tx_rate = stmmac_set_clk_tx_rate;
 
 	dwmac->dev = &pdev->dev;
+	plat_dat->flags |= STMMAC_FLAG_EN_TX_LPI_CLK_PHY_CAP;
 	plat_dat->bsp_priv = dwmac;
 	plat_dat->dma_cfg->dche = true;