| Message ID | E1trIAF-005ntc-S5@rmk-PC.armlinux.org.uk (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | [net-next,1/7] net: stmmac: allow platforms to use PHY tx clock stop capability | expand |
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi index 0d8339357bad..a7aed4a21b65 100644 --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi @@ -1022,7 +1022,6 @@ gmac0: ethernet@16030000 { snps,force_thresh_dma_mode; snps,axi-config = <&stmmac_axi_setup>; snps,tso; - snps,en-tx-lpi-clockgating; snps,txpbl = <16>; snps,rxpbl = <16>; starfive,syscon = <&aon_syscon 0xc 0x12>; @@ -1053,7 +1052,6 @@ gmac1: ethernet@16040000 { snps,force_thresh_dma_mode; snps,axi-config = <&stmmac_axi_setup>; snps,tso; - snps,en-tx-lpi-clockgating; snps,txpbl = <16>; snps,rxpbl = <16>; starfive,syscon = <&sys_syscon 0x90 0x2>;
Whether the MII transmit clock can be stopped is primarily a property of the PHY (there is a capability bit that should be checked first.) Whether the MAC is capable of stopping the transmit clock is a separate issue, but this is already handled by the core DesignWare MAC code. As commit "net: stmmac: starfive: use PHY capability for TX clock stop" adds the flag to use the PHY capability, remove the DT property that is now unecessary. Cc: Samin Guo <samin.guo@starfivetech.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> --- arch/riscv/boot/dts/starfive/jh7110.dtsi | 2 -- 1 file changed, 2 deletions(-)