diff mbox series

[v4] thermal: fix race condition in suspend/resume

Message ID TYZPR03MB5199B14364633FD7A09A13719490A@TYZPR03MB5199.apcprd03.prod.outlook.com (mailing list archive)
State New, archived
Headers show
Series [v4] thermal: fix race condition in suspend/resume | expand

Commit Message

Bo Ye Dec. 18, 2023, 4:27 p.m. UTC
From: "yugang.wang" <yugang.wang@mediatek.com>

  Firstly, it needs to be clarified that this issue occurs in a real- world environment. By analyzing the logs, we inferred that the issue occurred just as the system was entering suspend mode, and the user was switching the thermal policy (this action causes all thermal zones to unregister/register). In addition, we conducted degradation tests and also reproduced this issue. The specific method is to first switch the thermal policy through a command, and then immediately put the system into suspend state through another command. This method can also reproduce the issue.

Body:
  This patch fixes a race condition during system resume. It occurs
  if the system is exiting a suspend state and a user is trying to
  register/unregister a thermal zone concurrently. The root cause is
  that both actions access the `thermal_tz_list`.

In detail:

  1. At PM_POST_SUSPEND during the resume, the system reads all
  thermal
     zones in `thermal_tz_list`, then resets and updates their
     temperatures.
  2. When registering/unregistering a thermal zone, the
     `thermal_tz_list` gets manipulated.

  These two actions might occur concurrently, causing a race condition.
  To solve this issue, we introduce a mutex lock to protect
  `thermal_tz_list` from being modified while it's being read and
  updated during the resume from suspend.

  Kernel oops excerpt related to this fix:

  [ 5201.869845] [T316822] pc: [0xffffffeb7d4876f0]
  mutex_lock+0x34/0x170
  [ 5201.869856] [T316822] lr: [0xffffffeb7ca98a84]
  thermal_pm_notify+0xd4/0x26c
  [... cut for brevity ...]
  [ 5201.871061] [T316822]  suspend_prepare+0x150/0x470
  [ 5201.871067] [T316822]  enter_state+0x84/0x6f4
  [ 5201.871076] [T316822]  state_store+0x15c/0x1e8

  3.Enable thermal policy operation will unregister/register all thermal zones
     10-21 06:13:59.280   854   922 I libMtcLoader: enable thermal policy thermal_policy_09.

  4.System suspend entry time is 2023-10-20 22:13:59.242
     [ 4106.364175][T609387] binder:534_2: [name:spm&][SPM] PM: suspend entry 2023-10-20 22:13:59.242898243 UTC
     [ 4106.366185][T609387] binder:534_2: PM: [name:wakeup&]PM: Pending Wakeup Sources: NETLINK

  5. It can be proven that the absence of a switch strategy will perform
     unregister/register operations on thermal zones (android time is 2023-10-20 22:13:59.282),
     Because the logs for other thermal zones switching are not enabled by
     default, we cannot see the logs related to other thermal zones.
     [ 4106.404167][T600922] mtkPowerMsgHdl:[name:thermal_monitor&][Thermal/TZ/CPU]tscpu_unbind unbinding OK
     [ 4106.404215][T600922] mtkPowerMsgHdl:[name:thermal_monitor&][Thermal/TZ/CPU]tscpu_unbind unbinding OK
     [ 4106.404225][T600922] mtkPowerMsgHdl:[name:thermal_monitor&][Thermal/TZ/CPU]tscpu_unbind unbinding OK
     [ 4106.404504][T600922] mtkPowerMsgHdl:[name:thermal_monitor&][Thermal/TZ/CPU]tscpu_bind binding OK, 0
     [ 4106.404545][T600922] mtkPowerMsgHdl:[name:thermal_monitor&][Thermal/TZ/CPU]tscpu_bind binding OK, 2
     [ 4106.404566][T600922] mtkPowerMsgHdl:[name:thermal_monitor&][Thermal/TZ/CPU]tscpu_bind binding OK, 1

  6. thermal_pm_notify trigger KE(android time:  2023-10-20 22:13:59.315894)
     [ 4106.437171][T209387] binder:534_2: [name:mrdump&]Kernel Offset:0x289cc80000 from 0xffffffc008000000
     [ 4106.437182][T209387] binder:534_2: [name:mrdump&]PHYS_OFFSET:0x40000000
     [ 4106.437191][T209387] binder:534_2: [name:mrdump&]pstate: 80400005(Nzcv daif +PAN -UAO)
     [ 4106.437204][T209387] binder:534_2: [name:mrdump&]pc :[0xffffffe8a6688200] mutex_lock+0x34/0x184
     [ 4106.437214][T209387] binder:534_2: [name:mrdump&]lr :[0xffffffe8a5ce66bc] thermal_pm_notify+0xd4/0x26c
     [ 4106.437220][T209387] binder:534_2: [name:mrdump&]sp :ffffffc01bab3ae0
     [ 4106.437226][T209387] binder:534_2: [name:mrdump&]x29:ffffffc01bab3af0 x28: 0000000000000001

Signed-off-by: Yugang Wang <yugang.wang@mediatek.com>
Signed-off-by: Bo Ye <bo.ye@mediatek.com>
---
Change in v2:
-remove Subject from title
-add message for reviewers' comment

Change in v3:
-remove "potential" word from title
-add more detail on issue

Change in v4:
-remove Change-Id
---
 drivers/thermal/thermal_core.c | 2 ++
 1 file changed, 2 insertions(+)

--
2.17.0
diff mbox series

Patch

diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 9c17d35ccbbd..73d6b820c8b5 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -1520,12 +1520,14 @@  static int thermal_pm_notify(struct notifier_block *nb,
 	case PM_POST_HIBERNATION:
 	case PM_POST_RESTORE:
 	case PM_POST_SUSPEND:
+		mutex_lock(&thermal_list_lock);
 		atomic_set(&in_suspend, 0);
 		list_for_each_entry(tz, &thermal_tz_list, node) {
 			thermal_zone_device_init(tz);
 			thermal_zone_device_update(tz,
 						   THERMAL_EVENT_UNSPECIFIED);
 		}
+		mutex_unlock(&thermal_list_lock);
 		break;
 	default:
 		break;