diff mbox series

[v3] PCI: mvebu: switch to using gpiod API

Message ID Y5EAft42YiT66mVj@google.com (mailing list archive)
State New, archived
Headers show
Series [v3] PCI: mvebu: switch to using gpiod API | expand

Commit Message

Dmitry Torokhov Dec. 7, 2022, 9:07 p.m. UTC
This patch switches the driver away from legacy gpio/of_gpio API to
gpiod API, and removes use of of_get_named_gpio_flags() which I want to
make private to gpiolib.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---

v3:
 - add #include <linux/irqchip/chained_irq.h> to avoid compile errors.
   This was previously included indirectly via linux/of_gpio.h ->
   linux/gpio/driver.h

v2:
 - free port->reset_name when reset GPIO is not found (Pali)
 - remove stray tab (Pali)

This is the last user of of_get_named_gpio_flags() in the "next" tree.

Thanks!

 drivers/pci/controller/pci-mvebu.c | 51 ++++++++++--------------------
 1 file changed, 17 insertions(+), 34 deletions(-)

Comments

Bjorn Helgaas Dec. 7, 2022, 10:08 p.m. UTC | #1
On Wed, Dec 07, 2022 at 01:07:10PM -0800, Dmitry Torokhov wrote:
> This patch switches the driver away from legacy gpio/of_gpio API to
> gpiod API, and removes use of of_get_named_gpio_flags() which I want to
> make private to gpiolib.
> 
> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Applied to pci/ctrl/mvebu for v6.2, thanks, Dmitry!

> ---
> 
> v3:
>  - add #include <linux/irqchip/chained_irq.h> to avoid compile errors.
>    This was previously included indirectly via linux/of_gpio.h ->
>    linux/gpio/driver.h
> 
> v2:
>  - free port->reset_name when reset GPIO is not found (Pali)
>  - remove stray tab (Pali)
> 
> This is the last user of of_get_named_gpio_flags() in the "next" tree.
> 
> Thanks!
> 
>  drivers/pci/controller/pci-mvebu.c | 51 ++++++++++--------------------
>  1 file changed, 17 insertions(+), 34 deletions(-)
> 
> diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
> index 73db99035c2b..600964ba174c 100644
> --- a/drivers/pci/controller/pci-mvebu.c
> +++ b/drivers/pci/controller/pci-mvebu.c
> @@ -11,15 +11,15 @@
>  #include <linux/bitfield.h>
>  #include <linux/clk.h>
>  #include <linux/delay.h>
> -#include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
>  #include <linux/init.h>
>  #include <linux/irqdomain.h>
> +#include <linux/irqchip/chained_irq.h>
>  #include <linux/mbus.h>
>  #include <linux/slab.h>
>  #include <linux/platform_device.h>
>  #include <linux/of_address.h>
>  #include <linux/of_irq.h>
> -#include <linux/of_gpio.h>
>  #include <linux/of_pci.h>
>  #include <linux/of_platform.h>
>  
> @@ -1262,9 +1262,8 @@ static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie,
>  	struct mvebu_pcie_port *port, struct device_node *child)
>  {
>  	struct device *dev = &pcie->pdev->dev;
> -	enum of_gpio_flags flags;
>  	u32 slot_power_limit;
> -	int reset_gpio, ret;
> +	int ret;
>  	u32 num_lanes;
>  
>  	port->pcie = pcie;
> @@ -1328,40 +1327,24 @@ static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie,
>  			 port->name, child);
>  	}
>  
> -	reset_gpio = of_get_named_gpio_flags(child, "reset-gpios", 0, &flags);
> -	if (reset_gpio == -EPROBE_DEFER) {
> -		ret = reset_gpio;
> +	port->reset_name = devm_kasprintf(dev, GFP_KERNEL, "%s-reset",
> +					  port->name);
> +	if (!port->reset_name) {
> +		ret = -ENOMEM;
>  		goto err;
>  	}
>  
> -	if (gpio_is_valid(reset_gpio)) {
> -		unsigned long gpio_flags;
> -
> -		port->reset_name = devm_kasprintf(dev, GFP_KERNEL, "%s-reset",
> -						  port->name);
> -		if (!port->reset_name) {
> -			ret = -ENOMEM;
> +	port->reset_gpio = devm_fwnode_gpiod_get(dev, of_fwnode_handle(child),
> +						 "reset", GPIOD_OUT_HIGH,
> +						 port->name);
> +	ret = PTR_ERR_OR_ZERO(port->reset_gpio);
> +	if (ret) {
> +		if (ret != -ENOENT)
>  			goto err;
> -		}
> -
> -		if (flags & OF_GPIO_ACTIVE_LOW) {
> -			dev_info(dev, "%pOF: reset gpio is active low\n",
> -				 child);
> -			gpio_flags = GPIOF_ACTIVE_LOW |
> -				     GPIOF_OUT_INIT_LOW;
> -		} else {
> -			gpio_flags = GPIOF_OUT_INIT_HIGH;
> -		}
> -
> -		ret = devm_gpio_request_one(dev, reset_gpio, gpio_flags,
> -					    port->reset_name);
> -		if (ret) {
> -			if (ret == -EPROBE_DEFER)
> -				goto err;
> -			goto skip;
> -		}
> -
> -		port->reset_gpio = gpio_to_desc(reset_gpio);
> +		/* reset gpio is optional */
> +		port->reset_gpio = NULL;
> +		devm_kfree(dev, port->reset_name);
> +		port->reset_name = NULL;
>  	}
>  
>  	slot_power_limit = of_pci_get_slot_power_limit(child,
> -- 
> 2.39.0.rc0.267.gcb52ba06e7-goog
> 
> 
> -- 
> Dmitry
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
diff mbox series

Patch

diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
index 73db99035c2b..600964ba174c 100644
--- a/drivers/pci/controller/pci-mvebu.c
+++ b/drivers/pci/controller/pci-mvebu.c
@@ -11,15 +11,15 @@ 
 #include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/init.h>
 #include <linux/irqdomain.h>
+#include <linux/irqchip/chained_irq.h>
 #include <linux/mbus.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
-#include <linux/of_gpio.h>
 #include <linux/of_pci.h>
 #include <linux/of_platform.h>
 
@@ -1262,9 +1262,8 @@  static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie,
 	struct mvebu_pcie_port *port, struct device_node *child)
 {
 	struct device *dev = &pcie->pdev->dev;
-	enum of_gpio_flags flags;
 	u32 slot_power_limit;
-	int reset_gpio, ret;
+	int ret;
 	u32 num_lanes;
 
 	port->pcie = pcie;
@@ -1328,40 +1327,24 @@  static int mvebu_pcie_parse_port(struct mvebu_pcie *pcie,
 			 port->name, child);
 	}
 
-	reset_gpio = of_get_named_gpio_flags(child, "reset-gpios", 0, &flags);
-	if (reset_gpio == -EPROBE_DEFER) {
-		ret = reset_gpio;
+	port->reset_name = devm_kasprintf(dev, GFP_KERNEL, "%s-reset",
+					  port->name);
+	if (!port->reset_name) {
+		ret = -ENOMEM;
 		goto err;
 	}
 
-	if (gpio_is_valid(reset_gpio)) {
-		unsigned long gpio_flags;
-
-		port->reset_name = devm_kasprintf(dev, GFP_KERNEL, "%s-reset",
-						  port->name);
-		if (!port->reset_name) {
-			ret = -ENOMEM;
+	port->reset_gpio = devm_fwnode_gpiod_get(dev, of_fwnode_handle(child),
+						 "reset", GPIOD_OUT_HIGH,
+						 port->name);
+	ret = PTR_ERR_OR_ZERO(port->reset_gpio);
+	if (ret) {
+		if (ret != -ENOENT)
 			goto err;
-		}
-
-		if (flags & OF_GPIO_ACTIVE_LOW) {
-			dev_info(dev, "%pOF: reset gpio is active low\n",
-				 child);
-			gpio_flags = GPIOF_ACTIVE_LOW |
-				     GPIOF_OUT_INIT_LOW;
-		} else {
-			gpio_flags = GPIOF_OUT_INIT_HIGH;
-		}
-
-		ret = devm_gpio_request_one(dev, reset_gpio, gpio_flags,
-					    port->reset_name);
-		if (ret) {
-			if (ret == -EPROBE_DEFER)
-				goto err;
-			goto skip;
-		}
-
-		port->reset_gpio = gpio_to_desc(reset_gpio);
+		/* reset gpio is optional */
+		port->reset_gpio = NULL;
+		devm_kfree(dev, port->reset_name);
+		port->reset_name = NULL;
 	}
 
 	slot_power_limit = of_pci_get_slot_power_limit(child,