@@ -100,13 +100,34 @@ static int _mtk_mdio_write(struct mtk_eth *eth, u32 phy_addr, u32 phy_reg,
if (mtk_mdio_busy_wait(eth))
return -EBUSY;
- mtk_w32(eth, PHY_IAC_ACCESS |
- PHY_IAC_START_C22 |
- PHY_IAC_CMD_WRITE |
- PHY_IAC_REG(phy_reg) |
- PHY_IAC_ADDR(phy_addr) |
- PHY_IAC_DATA(write_data),
- MTK_PHY_IAC);
+ if (phy_reg & MII_ADDR_C45) {
+ mtk_w32(eth, PHY_IAC_ACCESS |
+ PHY_IAC_START_C45 |
+ PHY_IAC_CMD_C45_ADDR |
+ PHY_IAC_REG(mdiobus_c45_devad(phy_reg)) |
+ PHY_IAC_ADDR(phy_addr) |
+ PHY_IAC_DATA(mdiobus_c45_regad(phy_reg)),
+ MTK_PHY_IAC);
+
+ if (mtk_mdio_busy_wait(eth))
+ return -EBUSY;
+
+ mtk_w32(eth, PHY_IAC_ACCESS |
+ PHY_IAC_START_C45 |
+ PHY_IAC_CMD_WRITE |
+ PHY_IAC_REG(mdiobus_c45_devad(phy_reg)) |
+ PHY_IAC_ADDR(phy_addr) |
+ PHY_IAC_DATA(write_data),
+ MTK_PHY_IAC);
+ } else {
+ mtk_w32(eth, PHY_IAC_ACCESS |
+ PHY_IAC_START_C22 |
+ PHY_IAC_CMD_WRITE |
+ PHY_IAC_REG(phy_reg) |
+ PHY_IAC_ADDR(phy_addr) |
+ PHY_IAC_DATA(write_data),
+ MTK_PHY_IAC);
+ }
if (mtk_mdio_busy_wait(eth))
return -EBUSY;
@@ -119,12 +140,32 @@ static int _mtk_mdio_read(struct mtk_eth *eth, u32 phy_addr, u32 phy_reg)
if (mtk_mdio_busy_wait(eth))
return -EBUSY;
- mtk_w32(eth, PHY_IAC_ACCESS |
- PHY_IAC_START_C22 |
- PHY_IAC_CMD_C22_READ |
- PHY_IAC_REG(phy_reg) |
- PHY_IAC_ADDR(phy_addr),
- MTK_PHY_IAC);
+ if (phy_reg & MII_ADDR_C45) {
+ mtk_w32(eth, PHY_IAC_ACCESS |
+ PHY_IAC_START_C45 |
+ PHY_IAC_CMD_C45_ADDR |
+ PHY_IAC_REG(mdiobus_c45_devad(phy_reg)) |
+ PHY_IAC_ADDR(phy_addr) |
+ PHY_IAC_DATA(mdiobus_c45_regad(phy_reg)),
+ MTK_PHY_IAC);
+
+ if (mtk_mdio_busy_wait(eth))
+ return -EBUSY;
+
+ mtk_w32(eth, PHY_IAC_ACCESS |
+ PHY_IAC_START_C45 |
+ PHY_IAC_CMD_C45_READ |
+ PHY_IAC_REG(mdiobus_c45_devad(phy_reg)) |
+ PHY_IAC_ADDR(phy_addr),
+ MTK_PHY_IAC);
+ } else {
+ mtk_w32(eth, PHY_IAC_ACCESS |
+ PHY_IAC_START_C22 |
+ PHY_IAC_CMD_C22_READ |
+ PHY_IAC_REG(phy_reg) |
+ PHY_IAC_ADDR(phy_addr),
+ MTK_PHY_IAC);
+ }
if (mtk_mdio_busy_wait(eth))
return -EBUSY;
@@ -496,6 +537,7 @@ static int mtk_mdio_init(struct mtk_eth *eth)
eth->mii_bus->name = "mdio";
eth->mii_bus->read = mtk_mdio_read;
eth->mii_bus->write = mtk_mdio_write;
+ eth->mii_bus->probe_capabilities = MDIOBUS_C22_C45;
eth->mii_bus->priv = eth;
eth->mii_bus->parent = eth->dev;
@@ -346,9 +346,12 @@
#define PHY_IAC_ADDR_MASK GENMASK(24, 20)
#define PHY_IAC_ADDR(x) FIELD_PREP(PHY_IAC_ADDR_MASK, (x))
#define PHY_IAC_CMD_MASK GENMASK(19, 18)
+#define PHY_IAC_CMD_C45_ADDR FIELD_PREP(PHY_IAC_CMD_MASK, 0)
#define PHY_IAC_CMD_WRITE FIELD_PREP(PHY_IAC_CMD_MASK, 1)
#define PHY_IAC_CMD_C22_READ FIELD_PREP(PHY_IAC_CMD_MASK, 2)
+#define PHY_IAC_CMD_C45_READ FIELD_PREP(PHY_IAC_CMD_MASK, 3)
#define PHY_IAC_START_MASK GENMASK(17, 16)
+#define PHY_IAC_START_C45 FIELD_PREP(PHY_IAC_START_MASK, 0)
#define PHY_IAC_START_C22 FIELD_PREP(PHY_IAC_START_MASK, 1)
#define PHY_IAC_DATA_MASK GENMASK(15, 0)
#define PHY_IAC_DATA(x) FIELD_PREP(PHY_IAC_DATA_MASK, (x))
Implement read and write access to IEEE 802.3 Clause 45 Ethernet phy registers while making use of new mdiobus_c45_regad and mdiobus_c45_devad helpers. Tested on the Ubiquiti UniFi 6 LR access point featuring MediaTek MT7622BV WiSoC with Aquantia AQR112C. Signed-off-by: Daniel Golle <daniel@makrotopia.org> --- v9: improved formatting and Cc missing maintainer v8: switch to bitfield helper macros, incl. newly introduced ones v7: remove unneeded variables and order OR-ed call parameters v6: further clean up functions and more cleanly separate patches v5: fix wrong variable name in first patch covered by follow-up patch v4: clean-up return values and types, split into two commits v3: return -1 instead of 0xffff on error in _mtk_mdio_write v2: use MII_DEVADDR_C45_SHIFT and MII_REGADDR_C45_MASK to extract device id and register address. Unify read and write functions to have identical types and parameter names where possible as we are anyway already replacing both function bodies. drivers/net/ethernet/mediatek/mtk_eth_soc.c | 68 +++++++++++++++++---- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 3 + 2 files changed, 58 insertions(+), 13 deletions(-)