diff mbox series

[1/2] dt-bindings: phy: airoha: Add dtime and Rx AEQ IO registers

Message ID a018329ff9678f3360bc6381294f95c62d34f3e3.1719682943.git.lorenzo@kernel.org (mailing list archive)
State New
Headers show
Series Add dtime and Rx AEQ IO registers to phy-airoha-pcie driver | expand

Commit Message

Lorenzo Bianconi June 29, 2024, 5:51 p.m. UTC
Introduce Tx-Rx detection time and Rx AEQ mappings in Airoha EN7581
PCIe-PHY binding. This change is not introducing any backward compatibility
issue since the EN7581 dts is not upstream yet.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
 .../bindings/phy/airoha,en7581-pcie-phy.yaml      | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

Comments

Conor Dooley July 1, 2024, 3:04 p.m. UTC | #1
On Sat, Jun 29, 2024 at 07:51:48PM +0200, Lorenzo Bianconi wrote:
> Introduce Tx-Rx detection time and Rx AEQ mappings in Airoha EN7581
> PCIe-PHY binding. This change is not introducing any backward compatibility
> issue since the EN7581 dts is not upstream yet.
> 
> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>

Acked-by: Conor Dooley <conor.dooley@microchip.com>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/phy/airoha,en7581-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/airoha,en7581-pcie-phy.yaml
index e26c30d17ff0..98fcb1b364de 100644
--- a/Documentation/devicetree/bindings/phy/airoha,en7581-pcie-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/airoha,en7581-pcie-phy.yaml
@@ -21,12 +21,18 @@  properties:
       - description: PCIE analog base address
       - description: PCIE lane0 base address
       - description: PCIE lane1 base address
+      - description: PCIE lane0 detection time base address
+      - description: PCIE lane1 detection time base address
+      - description: PCIE Rx AEQ base address
 
   reg-names:
     items:
       - const: csr-2l
       - const: pma0
       - const: pma1
+      - const: p0-xr-dtime
+      - const: p1-xr-dtime
+      - const: rx-aeq
 
   "#phy-cells":
     const: 0
@@ -52,7 +58,12 @@  examples:
             #phy-cells = <0>;
             reg = <0x0 0x1fa5a000 0x0 0xfff>,
                   <0x0 0x1fa5b000 0x0 0xfff>,
-                  <0x0 0x1fa5c000 0x0 0xfff>;
-            reg-names = "csr-2l", "pma0", "pma1";
+                  <0x0 0x1fa5c000 0x0 0xfff>,
+                  <0x0 0x1fc10044 0x0 0x4>,
+                  <0x0 0x1fc30044 0x0 0x4>,
+                  <0x0 0x1fc15030 0x0 0x104>;
+            reg-names = "csr-2l", "pma0", "pma1",
+                        "p0-xr-dtime", "p1-xr-dtime",
+                        "rx-aeq";
         };
     };