| Message ID | a9e9d67a430cc900508dc86831962b282e5edd1e.1609263738.git.cristian.ciocaltea@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add CMU/RMU/DMA/MMC/I2C support for Actions Semi | expand |
Em 12/29/2020 6:17 PM, Cristian Ciocaltea escreveu: > Add pinctrl node for Actions Semi S500 SoC. > > Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> > Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > --- > Changes in v3: > - Added Reviewed-by from Mani > > arch/arm/boot/dts/owl-s500.dtsi | 20 ++++++++++++++++++++ > 1 file changed, 20 insertions(+) > > diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/owl-s500.dtsi > index 449e9807c4ec..b16172615db0 100644 > --- a/arch/arm/boot/dts/owl-s500.dtsi > +++ b/arch/arm/boot/dts/owl-s500.dtsi > @@ -6,6 +6,7 @@ > */ > > #include <dt-bindings/clock/actions,s500-cmu.h> > +#include <dt-bindings/gpio/gpio.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > #include <dt-bindings/power/owl-s500-powergate.h> > #include <dt-bindings/reset/actions,s500-reset.h> > @@ -208,6 +209,25 @@ sps: power-controller@b01b0100 { > #power-domain-cells = <1>; > }; > > + pinctrl: pinctrl@b01b0000 { > + compatible = "actions,s500-pinctrl"; > + reg = <0xb01b0000 0x40>, /* GPIO */ > + <0xb01b0040 0x10>, /* Multiplexing Control */ > + <0xb01b0060 0x18>, /* PAD Control */ > + <0xb01b0080 0xc>; /* PAD Drive Capacity */ > + clocks = <&cmu CLK_GPIO>; > + gpio-controller; > + gpio-ranges = <&pinctrl 0 0 132>; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, /* GPIOA */ > + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, /* GPIOB */ > + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, /* GPIOC */ > + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, /* GPIOD */ > + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; /* GPIOE */ > + }; > + > dma: dma-controller@b0260000 { > compatible = "actions,s500-dma"; > reg = <0xb0260000 0xd00>; > Tested-by: Matheus Castello <matheus@castello.eng.br>
diff --git a/arch/arm/boot/dts/owl-s500.dtsi b/arch/arm/boot/dts/owl-s500.dtsi index 449e9807c4ec..b16172615db0 100644 --- a/arch/arm/boot/dts/owl-s500.dtsi +++ b/arch/arm/boot/dts/owl-s500.dtsi @@ -6,6 +6,7 @@ */ #include <dt-bindings/clock/actions,s500-cmu.h> +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/owl-s500-powergate.h> #include <dt-bindings/reset/actions,s500-reset.h> @@ -208,6 +209,25 @@ sps: power-controller@b01b0100 { #power-domain-cells = <1>; }; + pinctrl: pinctrl@b01b0000 { + compatible = "actions,s500-pinctrl"; + reg = <0xb01b0000 0x40>, /* GPIO */ + <0xb01b0040 0x10>, /* Multiplexing Control */ + <0xb01b0060 0x18>, /* PAD Control */ + <0xb01b0080 0xc>; /* PAD Drive Capacity */ + clocks = <&cmu CLK_GPIO>; + gpio-controller; + gpio-ranges = <&pinctrl 0 0 132>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, /* GPIOA */ + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, /* GPIOB */ + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, /* GPIOC */ + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, /* GPIOD */ + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; /* GPIOE */ + }; + dma: dma-controller@b0260000 { compatible = "actions,s500-dma"; reg = <0xb0260000 0xd00>;