diff mbox series

[4/5] arm64: dts: mt7622: add bananapi BPI-R64 board

Message ID aaa12572cdce6db8e72265817e8ffc8ce05d641c.1534130854.git.ryder.lee@mediatek.com (mailing list archive)
State New, archived
Headers show
Series [1/5] arm64: dts: mt7622: add some misc device nodes | expand

Commit Message

Ryder Lee Aug. 15, 2018, 5:18 a.m. UTC 
Add support for the bananapi R64 (BPI-R64) development board from
BIPAI KEJI. Detailed hardware information for BPI-R64 which could be
found on http://wiki.banana-pi.org/Banana_Pi_BPI-R64

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/Makefile              |   1 +
 .../boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts  | 508 +++++++++++++++++++++
 2 files changed, 509 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts

Comments

Sean Wang Aug. 16, 2018, 7:52 a.m. UTC | #1 
Hi, Ryder

On Wed, 2018-08-15 at 13:18 +0800, Ryder Lee wrote:
> Add support for the bananapi R64 (BPI-R64) development board from
> BIPAI KEJI. Detailed hardware information for BPI-R64 which could be
> found on http://wiki.banana-pi.org/Banana_Pi_BPI-R64
> 
> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
> ---
>  arch/arm64/boot/dts/mediatek/Makefile              |   1 +
>  .../boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts  | 508 +++++++++++++++++++++
>  2 files changed, 509 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
> 
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index ac17f60..2a1abe5 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -3,5 +3,6 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
> new file mode 100644
> index 0000000..bc504fe
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
> @@ -0,0 +1,508 @@
> +/*
> + * Copyright (c) 2018 MediaTek Inc.
> + * Author: Ryder Lee <ryder.lee@mediatek.com>
> + *
> + * SPDX-License-Identifier: (GPL-2.0 OR MIT)
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/gpio/gpio.h>
> +
> +#include "mt7622.dtsi"
> +#include "mt6380.dtsi"
> +
> +/ {
> +	model = "Bananapi BPI-R64";
> +	compatible = "bananapi,bpi-r64", "mediatek,mt7622";
> +
> +	chosen {
> +		bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512";
> +	};
> +
> +	cpus {
> +		cpu@0 {
> +			proc-supply = <&mt6380_vcpu_reg>;
> +			sram-supply = <&mt6380_vm_reg>;
> +		};
> +
> +		cpu@1 {
> +			proc-supply = <&mt6380_vcpu_reg>;
> +			sram-supply = <&mt6380_vm_reg>;
> +		};
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +		poll-interval = <100>;
> +

the property poll-interval seems be only for a gpio-keys-polled device

> +		factory {
> +			label = "factory";
> +			linux,code = <BTN_0>;
> +			gpios = <&pio 0 0>;
> +		};
> +
> +		wps {
> +			label = "wps";
> +			linux,code = <KEY_WPS_BUTTON>;
> +			gpios = <&pio 102 0>;
> +		};
> +	};
> +
> +	memory {
> +		reg = <0 0x40000000 0 0x40000000>;
> +	};
> +
> +	reg_1p8v: regulator-1p8v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "fixed-1.8V";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		regulator-always-on;
> +	};
> +
> +	reg_3p3v: regulator-3p3v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "fixed-3.3V";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-boot-on;
> +		regulator-always-on;
> +	};
> +
> +	reg_5v: regulator-5v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "fixed-5V";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-boot-on;
> +		regulator-always-on;
> +	};
> +};
> +
> +&bch {
> +	status = "disabled";
> +};
> +
> +&btif {
> +	status = "okay";
> +};
> +
> +&cir {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&irrx_pins>;
> +	status = "okay";
> +};
> +
> +&eth {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&eth_pins>;
> +	status = "okay";
> +
> +	gmac1: mac@1 {
> +		compatible = "mediatek,eth-mac";
> +		reg = <1>;
> +		phy-handle = <&phy5>;
> +	};
> +
> +	mdio-bus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		phy5: ethernet-phy@5 {
> +			reg = <5>;
> +			phy-mode = "sgmii";
> +		};
> +	};
> +};
> +
> +&i2c1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c1_pins>;
> +	status = "okay";
> +};
> +
> +&i2c2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c2_pins>;
> +	status = "okay";
> +};
> +
> +&mmc0 {
> +	pinctrl-names = "default", "state_uhs";
> +	pinctrl-0 = <&emmc_pins_default>;
> +	pinctrl-1 = <&emmc_pins_uhs>;
> +	status = "okay";
> +	bus-width = <8>;
> +	max-frequency = <50000000>;
> +	cap-mmc-highspeed;
> +	mmc-hs200-1_8v;
> +	vmmc-supply = <&reg_3p3v>;
> +	vqmmc-supply = <&reg_1p8v>;
> +	assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
> +	assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
> +	non-removable;
> +};
> +
> +&mmc1 {
> +	pinctrl-names = "default", "state_uhs";
> +	pinctrl-0 = <&sd0_pins_default>;
> +	pinctrl-1 = <&sd0_pins_uhs>;
> +	status = "okay";
> +	bus-width = <4>;
> +	max-frequency = <50000000>;
> +	cap-sd-highspeed;
> +	r_smpl = <1>;
> +	cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
> +	vmmc-supply = <&reg_3p3v>;
> +	vqmmc-supply = <&reg_3p3v>;
> +	assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
> +	assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
> +};
> +
> +&nandc {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&parallel_nand_pins>;
> +	status = "disabled";
> +};
> +
> +&nor_flash {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&spi_nor_pins>;
> +	status = "disabled";
> +
> +	flash@0 {
> +		compatible = "jedec,spi-nor";
> +		reg = <0>;
> +	};
> +};
> +
> +&pcie {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pcie0_pins>;
> +	pinctrl-1 = <&pcie1_pins>;

it should be pinctrl-0 = <&pcie0_pins>, <&pcie1_pins>;

otherwise, no name is being mapped into pinctrl-1 setup

> +	status = "okay";
> +
> +	pcie@0,0 {
> +		status = "okay";
> +	};
> +
> +	pcie@1,0 {
> +		status = "okay";
> +	};
> +};
> +
> +&pio {
> +	/* Attention: GPIO 90 is used to switch between PCIe@1,0 and
> +	 * SATA functions. i.e. output-high: PCIe, output-low: SATA
> +	 */


the sata node  seems be missing in the newly added dts

> +	asm_sel {
> +		gpio-hog;
> +		gpios = <90 GPIO_ACTIVE_HIGH>;
> +		output-high;
> +	};
> +
> +	/* eMMC is shared pin with parallel NAND */
> +	emmc_pins_default: emmc-pins-default {
> +		mux {
> +			function = "emmc", "emmc_rst";
> +			groups = "emmc";
> +		};
> +
> +		/* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
> +		 * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
> +		 * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively
> +		 */
> +		conf-cmd-dat {
> +			pins = "NDL0", "NDL1", "NDL2",
> +			       "NDL3", "NDL4", "NDL5",
> +			       "NDL6", "NDL7", "NRB";
> +			input-enable;
> +			bias-pull-up;
> +		};
> +
> +		conf-clk {
> +			pins = "NCLE";
> +			bias-pull-down;
> +		};
> +	};
> +
> +	emmc_pins_uhs: emmc-pins-uhs {
> +		mux {
> +			function = "emmc";
> +			groups = "emmc";
> +		};
> +
> +		conf-cmd-dat {
> +			pins = "NDL0", "NDL1", "NDL2",
> +			       "NDL3", "NDL4", "NDL5",
> +			       "NDL6", "NDL7", "NRB";
> +			input-enable;
> +			drive-strength = <4>;
> +			bias-pull-up;
> +		};
> +
> +		conf-clk {
> +			pins = "NCLE";
> +			drive-strength = <4>;
> +			bias-pull-down;
> +		};
> +	};
> +
> +	eth_pins: eth-pins {
> +		mux {
> +			function = "eth";
> +			groups = "mdc_mdio", "rgmii_via_gmac2";
> +		};
> +	};
> +
> +	i2c1_pins: i2c1-pins {
> +		mux {
> +			function = "i2c";
> +			groups =  "i2c1_0";
> +		};
> +	};
> +
> +	i2c2_pins: i2c2-pins {
> +		mux {
> +			function = "i2c";
> +			groups =  "i2c2_0";
> +		};
> +	};
> +
> +	i2s1_pins: i2s1-pins {
> +		mux {
> +			function = "i2s";
> +			groups =  "i2s_out_mclk_bclk_ws",
> +				  "i2s1_in_data",
> +				  "i2s1_out_data";
> +		};
> +
> +		conf {
> +			pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK",
> +			       "I2S_WS", "I2S_MCLK";
> +			drive-strength = <12>;
> +			bias-pull-down;
> +		};
> +	};
> +
> +	irrx_pins: irrx-pins {
> +		mux {
> +			function = "ir";
> +			groups =  "ir_1_rx";
> +		};
> +	};
> +
> +	irtx_pins: irtx-pins {
> +		mux {
> +			function = "ir";
> +			groups =  "ir_1_tx";
> +		};
> +	};
> +
> +	/* Parallel nand is shared pin with eMMC */
> +	parallel_nand_pins: parallel-nand-pins {
> +		mux {
> +			function = "flash";
> +			groups = "par_nand";
> +		};
> +	};
> +
> +	pcie0_pins: pcie0-pins {
> +		mux {
> +			function = "pcie";
> +			groups = "pcie0_pad_perst",
> +				 "pcie0_1_waken",
> +				 "pcie0_1_clkreq";
> +		};
> +	};
> +
> +	pcie1_pins: pcie1-pins {
> +		mux {
> +			function = "pcie";
> +			groups = "pcie1_pad_perst",
> +				 "pcie1_0_waken",
> +				 "pcie1_0_clkreq";
> +		};
> +	};
> +
> +	pmic_bus_pins: pmic-bus-pins {
> +		mux {
> +			function = "pmic";
> +			groups = "pmic_bus";
> +		};
> +	};
> +
> +	pwm7_pins: pwm1-2-pins {
> +		mux {
> +			function = "pwm";
> +			groups = "pwm_ch7_2";
> +		};
> +	};
> +
> +	wled_pins: wled-pins {
> +		mux {
> +			function = "led";
> +			groups = "wled";
> +		};
> +	};
> +
> +	sd0_pins_default: sd0-pins-default {
> +		mux {
> +			function = "sd";
> +			groups = "sd_0";
> +		};
> +
> +		/* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN",
> +		 *  "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
> +		 *  DAT2, DAT3, CMD, CLK for SD respectively.
> +		 */
> +		conf-cmd-data {
> +			pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
> +			       "I2S2_IN","I2S4_OUT";
> +			input-enable;
> +			drive-strength = <8>;
> +			bias-pull-up;
> +		};
> +		conf-clk {
> +			pins = "I2S3_OUT";
> +			drive-strength = <12>;
> +			bias-pull-down;
> +		};
> +		conf-cd {
> +			pins = "TXD3";
> +			bias-pull-up;
> +		};
> +	};
> +
> +	sd0_pins_uhs: sd0-pins-uhs {
> +		mux {
> +			function = "sd";
> +			groups = "sd_0";
> +		};
> +
> +		conf-cmd-data {
> +			pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
> +			       "I2S2_IN","I2S4_OUT";
> +			input-enable;
> +			bias-pull-up;
> +		};
> +
> +		conf-clk {
> +			pins = "I2S3_OUT";
> +			bias-pull-down;
> +		};
> +	};
> +
> +	/* Serial NAND is shared pin with SPI-NOR */
> +	serial_nand_pins: serial-nand-pins {
> +		mux {
> +			function = "flash";
> +			groups = "snfi";
> +		};
> +	};
> +
> +	spic0_pins: spic0-pins {
> +		mux {
> +			function = "spi";
> +			groups = "spic0_0";
> +		};
> +	};
> +
> +	spic1_pins: spic1-pins {
> +		mux {
> +			function = "spi";
> +			groups = "spic1_0";
> +		};
> +	};
> +
> +	/* SPI-NOR is shared pin with serial NAND */
> +	spi_nor_pins: spi-nor-pins {
> +		mux {
> +			function = "flash";
> +			groups = "spi_nor";
> +		};
> +	};
> +
> +	/* serial NAND is shared pin with SPI-NOR */
> +	serial_nand_pins: serial-nand-pins {
> +		mux {
> +			function = "flash";
> +			groups = "snfi";
> +		};
> +	};
> +
> +	uart0_pins: uart0-pins {
> +		mux {
> +			function = "uart";
> +			groups = "uart0_0_tx_rx" ;
> +		};
> +	};
> +
> +	uart2_pins: uart2-pins {
> +		mux {
> +			function = "uart";
> +			groups = "uart2_1_tx_rx" ;
> +		};
> +	};
> +
> +	watchdog_pins: watchdog-pins {
> +		mux {
> +			function = "watchdog";
> +			groups = "watchdog";
> +		};
> +	};
> +};
> +
> +&pwm {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pwm7_pins>;
> +	status = "okay";
> +};
> +
> +&pwrap {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pmic_bus_pins>;
> +
> +	status = "okay";
> +};
> +
> +&spi0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&spic0_pins>;
> +	status = "okay";
> +};
> +
> +&spi1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&spic1_pins>;
> +	status = "okay";
> +};
> +
> +&ssusb {
> +	vusb33-supply = <&reg_3p3v>;
> +	vbus-supply = <&reg_5v>;
> +	status = "okay";
> +};
> +
> +&u3phy {
> +	status = "okay";
> +};
> +
> +&uart0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart0_pins>;
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart2_pins>;
> +	status = "okay";
> +};
> +
> +&watchdog {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&watchdog_pins>;
> +	status = "okay";
> +};
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index ac17f60..2a1abe5 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -3,5 +3,6 @@  dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
new file mode 100644
index 0000000..bc504fe
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -0,0 +1,508 @@ 
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Ryder Lee <ryder.lee@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+#include "mt7622.dtsi"
+#include "mt6380.dtsi"
+
+/ {
+	model = "Bananapi BPI-R64";
+	compatible = "bananapi,bpi-r64", "mediatek,mt7622";
+
+	chosen {
+		bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512";
+	};
+
+	cpus {
+		cpu@0 {
+			proc-supply = <&mt6380_vcpu_reg>;
+			sram-supply = <&mt6380_vm_reg>;
+		};
+
+		cpu@1 {
+			proc-supply = <&mt6380_vcpu_reg>;
+			sram-supply = <&mt6380_vm_reg>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		poll-interval = <100>;
+
+		factory {
+			label = "factory";
+			linux,code = <BTN_0>;
+			gpios = <&pio 0 0>;
+		};
+
+		wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&pio 102 0>;
+		};
+	};
+
+	memory {
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&bch {
+	status = "disabled";
+};
+
+&btif {
+	status = "okay";
+};
+
+&cir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&irrx_pins>;
+	status = "okay";
+};
+
+&eth {
+	pinctrl-names = "default";
+	pinctrl-0 = <&eth_pins>;
+	status = "okay";
+
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-handle = <&phy5>;
+	};
+
+	mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy5: ethernet-phy@5 {
+			reg = <5>;
+			phy-mode = "sgmii";
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&emmc_pins_default>;
+	pinctrl-1 = <&emmc_pins_uhs>;
+	status = "okay";
+	bus-width = <8>;
+	max-frequency = <50000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
+	assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
+	non-removable;
+};
+
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&sd0_pins_default>;
+	pinctrl-1 = <&sd0_pins_uhs>;
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-sd-highspeed;
+	r_smpl = <1>;
+	cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
+	assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
+};
+
+&nandc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&parallel_nand_pins>;
+	status = "disabled";
+};
+
+&nor_flash {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_nor_pins>;
+	status = "disabled";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_pins>;
+	pinctrl-1 = <&pcie1_pins>;
+	status = "okay";
+
+	pcie@0,0 {
+		status = "okay";
+	};
+
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&pio {
+	/* Attention: GPIO 90 is used to switch between PCIe@1,0 and
+	 * SATA functions. i.e. output-high: PCIe, output-low: SATA
+	 */
+	asm_sel {
+		gpio-hog;
+		gpios = <90 GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+
+	/* eMMC is shared pin with parallel NAND */
+	emmc_pins_default: emmc-pins-default {
+		mux {
+			function = "emmc", "emmc_rst";
+			groups = "emmc";
+		};
+
+		/* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
+		 * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
+		 * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively
+		 */
+		conf-cmd-dat {
+			pins = "NDL0", "NDL1", "NDL2",
+			       "NDL3", "NDL4", "NDL5",
+			       "NDL6", "NDL7", "NRB";
+			input-enable;
+			bias-pull-up;
+		};
+
+		conf-clk {
+			pins = "NCLE";
+			bias-pull-down;
+		};
+	};
+
+	emmc_pins_uhs: emmc-pins-uhs {
+		mux {
+			function = "emmc";
+			groups = "emmc";
+		};
+
+		conf-cmd-dat {
+			pins = "NDL0", "NDL1", "NDL2",
+			       "NDL3", "NDL4", "NDL5",
+			       "NDL6", "NDL7", "NRB";
+			input-enable;
+			drive-strength = <4>;
+			bias-pull-up;
+		};
+
+		conf-clk {
+			pins = "NCLE";
+			drive-strength = <4>;
+			bias-pull-down;
+		};
+	};
+
+	eth_pins: eth-pins {
+		mux {
+			function = "eth";
+			groups = "mdc_mdio", "rgmii_via_gmac2";
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		mux {
+			function = "i2c";
+			groups =  "i2c1_0";
+		};
+	};
+
+	i2c2_pins: i2c2-pins {
+		mux {
+			function = "i2c";
+			groups =  "i2c2_0";
+		};
+	};
+
+	i2s1_pins: i2s1-pins {
+		mux {
+			function = "i2s";
+			groups =  "i2s_out_mclk_bclk_ws",
+				  "i2s1_in_data",
+				  "i2s1_out_data";
+		};
+
+		conf {
+			pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK",
+			       "I2S_WS", "I2S_MCLK";
+			drive-strength = <12>;
+			bias-pull-down;
+		};
+	};
+
+	irrx_pins: irrx-pins {
+		mux {
+			function = "ir";
+			groups =  "ir_1_rx";
+		};
+	};
+
+	irtx_pins: irtx-pins {
+		mux {
+			function = "ir";
+			groups =  "ir_1_tx";
+		};
+	};
+
+	/* Parallel nand is shared pin with eMMC */
+	parallel_nand_pins: parallel-nand-pins {
+		mux {
+			function = "flash";
+			groups = "par_nand";
+		};
+	};
+
+	pcie0_pins: pcie0-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie0_pad_perst",
+				 "pcie0_1_waken",
+				 "pcie0_1_clkreq";
+		};
+	};
+
+	pcie1_pins: pcie1-pins {
+		mux {
+			function = "pcie";
+			groups = "pcie1_pad_perst",
+				 "pcie1_0_waken",
+				 "pcie1_0_clkreq";
+		};
+	};
+
+	pmic_bus_pins: pmic-bus-pins {
+		mux {
+			function = "pmic";
+			groups = "pmic_bus";
+		};
+	};
+
+	pwm7_pins: pwm1-2-pins {
+		mux {
+			function = "pwm";
+			groups = "pwm_ch7_2";
+		};
+	};
+
+	wled_pins: wled-pins {
+		mux {
+			function = "led";
+			groups = "wled";
+		};
+	};
+
+	sd0_pins_default: sd0-pins-default {
+		mux {
+			function = "sd";
+			groups = "sd_0";
+		};
+
+		/* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN",
+		 *  "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
+		 *  DAT2, DAT3, CMD, CLK for SD respectively.
+		 */
+		conf-cmd-data {
+			pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
+			       "I2S2_IN","I2S4_OUT";
+			input-enable;
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+		conf-clk {
+			pins = "I2S3_OUT";
+			drive-strength = <12>;
+			bias-pull-down;
+		};
+		conf-cd {
+			pins = "TXD3";
+			bias-pull-up;
+		};
+	};
+
+	sd0_pins_uhs: sd0-pins-uhs {
+		mux {
+			function = "sd";
+			groups = "sd_0";
+		};
+
+		conf-cmd-data {
+			pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
+			       "I2S2_IN","I2S4_OUT";
+			input-enable;
+			bias-pull-up;
+		};
+
+		conf-clk {
+			pins = "I2S3_OUT";
+			bias-pull-down;
+		};
+	};
+
+	/* Serial NAND is shared pin with SPI-NOR */
+	serial_nand_pins: serial-nand-pins {
+		mux {
+			function = "flash";
+			groups = "snfi";
+		};
+	};
+
+	spic0_pins: spic0-pins {
+		mux {
+			function = "spi";
+			groups = "spic0_0";
+		};
+	};
+
+	spic1_pins: spic1-pins {
+		mux {
+			function = "spi";
+			groups = "spic1_0";
+		};
+	};
+
+	/* SPI-NOR is shared pin with serial NAND */
+	spi_nor_pins: spi-nor-pins {
+		mux {
+			function = "flash";
+			groups = "spi_nor";
+		};
+	};
+
+	/* serial NAND is shared pin with SPI-NOR */
+	serial_nand_pins: serial-nand-pins {
+		mux {
+			function = "flash";
+			groups = "snfi";
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		mux {
+			function = "uart";
+			groups = "uart0_0_tx_rx" ;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		mux {
+			function = "uart";
+			groups = "uart2_1_tx_rx" ;
+		};
+	};
+
+	watchdog_pins: watchdog-pins {
+		mux {
+			function = "watchdog";
+			groups = "watchdog";
+		};
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm7_pins>;
+	status = "okay";
+};
+
+&pwrap {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_bus_pins>;
+
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spic0_pins>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spic1_pins>;
+	status = "okay";
+};
+
+&ssusb {
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&u3phy {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&watchdog {
+	pinctrl-names = "default";
+	pinctrl-0 = <&watchdog_pins>;
+	status = "okay";
+};