diff mbox

[v3,8/13] arm64: allwinner: a64: Add MMC nodes

Message ID ac77b9e25e7633886822cd1f1ebafd5985751ae4.1484585798.git-series.maxime.ripard@free-electrons.com (mailing list archive)
State New, archived
Headers show

Commit Message

Maxime Ripard Jan. 16, 2017, 4:56 p.m. UTC 
From: Andre Przywara <andre.przywara@arm.com>

The A64 has 3 MMC controllers, one of them being especially targeted to
eMMC. Among other things, it has a data strobe signal and a 8 bits data
width.

The two other are more usual controllers that will have a 4 bits width at
most and no data strobe signal, which limits it to more usual SD or MMC
peripherals.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 39 ++++++++++++++++++++-
 1 file changed, 39 insertions(+), 0 deletions(-)

Comments

Corentin Labbe Jan. 16, 2017, 7:16 p.m. UTC | #1 
On Mon, Jan 16, 2017 at 05:56:58PM +0100, Maxime Ripard wrote:
> From: Andre Przywara <andre.przywara@arm.com>
> 
> The A64 has 3 MMC controllers, one of them being especially targeted to
> eMMC. Among other things, it has a data strobe signal and a 8 bits data
> width.
> 
> The two other are more usual controllers that will have a 4 bits width at
> most and no data strobe signal, which limits it to more usual SD or MMC
> peripherals.
> 
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> ---
>  arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 39 ++++++++++++++++++++-
>  1 file changed, 39 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> index 99b6bb1e141c..143e9706438f 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> @@ -299,6 +299,45 @@
>  			#size-cells = <0>;
>  		};
>  
> +		mmc0: mmc@1c0f000 {
> +			compatible = "allwinner,sun50i-a64-mmc";
> +			reg = <0x01c0f000 0x1000>;
> +			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
> +			clock-names = "ahb", "mmc";
> +			resets = <&ccu RST_BUS_MMC0>;
> +			reset-names = "ahb";
> +			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
> +			status = "disabled";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +		};
> +
> +		mmc1: mmc@1c10000 {
> +			compatible = "allwinner,sun50i-a64-mmc";
> +			reg = <0x01c10000 0x1000>;
> +			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
> +			clock-names = "ahb", "mmc";
> +			resets = <&ccu RST_BUS_MMC1>;
> +			reset-names = "ahb";
> +			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
> +			status = "disabled";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +		};
> +
> +		mmc2: mmc@1c11000 {
> +			compatible = "allwinner,sun50i-a64-emmc";
> +			reg = <0x01c11000 0x1000>;
> +			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
> +			clock-names = "ahb", "mmc";
> +			resets = <&ccu RST_BUS_MMC2>;
> +			reset-names = "ahb";
> +			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
> +			status = "disabled";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +		};
> +
>  		gic: interrupt-controller@1c81000 {
>  			compatible = "arm,gic-400";
>  			reg = <0x01c81000 0x1000>,

Hello

It seems that mmc node is after i2c@1c2b400 so not in address order.

Regards
Corentin Labbe
Maxime Ripard Jan. 25, 2017, 9:17 a.m. UTC | #2 
Hi Corentin,

On Mon, Jan 16, 2017 at 08:16:41PM +0100, Corentin Labbe wrote:
> On Mon, Jan 16, 2017 at 05:56:58PM +0100, Maxime Ripard wrote:
> > From: Andre Przywara <andre.przywara@arm.com>
> > 
> > The A64 has 3 MMC controllers, one of them being especially targeted to
> > eMMC. Among other things, it has a data strobe signal and a 8 bits data
> > width.
> > 
> > The two other are more usual controllers that will have a 4 bits width at
> > most and no data strobe signal, which limits it to more usual SD or MMC
> > peripherals.
> > 
> > Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> > ---
> >  arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 39 ++++++++++++++++++++-
> >  1 file changed, 39 insertions(+), 0 deletions(-)
> > 
> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> > index 99b6bb1e141c..143e9706438f 100644
> > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> > @@ -299,6 +299,45 @@
> >  			#size-cells = <0>;
> >  		};
> >  
> > +		mmc0: mmc@1c0f000 {
> > +			compatible = "allwinner,sun50i-a64-mmc";
> > +			reg = <0x01c0f000 0x1000>;
> > +			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
> > +			clock-names = "ahb", "mmc";
> > +			resets = <&ccu RST_BUS_MMC0>;
> > +			reset-names = "ahb";
> > +			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
> > +			status = "disabled";
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +		};
> > +
> > +		mmc1: mmc@1c10000 {
> > +			compatible = "allwinner,sun50i-a64-mmc";
> > +			reg = <0x01c10000 0x1000>;
> > +			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
> > +			clock-names = "ahb", "mmc";
> > +			resets = <&ccu RST_BUS_MMC1>;
> > +			reset-names = "ahb";
> > +			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
> > +			status = "disabled";
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +		};
> > +
> > +		mmc2: mmc@1c11000 {
> > +			compatible = "allwinner,sun50i-a64-emmc";
> > +			reg = <0x01c11000 0x1000>;
> > +			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
> > +			clock-names = "ahb", "mmc";
> > +			resets = <&ccu RST_BUS_MMC2>;
> > +			reset-names = "ahb";
> > +			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
> > +			status = "disabled";
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +		};
> > +
> >  		gic: interrupt-controller@1c81000 {
> >  			compatible = "arm,gic-400";
> >  			reg = <0x01c81000 0x1000>,
> 
> Hello
> 
> It seems that mmc node is after i2c@1c2b400 so not in address order.

You're right, I'll fix this in the v3.

Thanks!
Maxime
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 99b6bb1e141c..143e9706438f 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -299,6 +299,45 @@ 
 			#size-cells = <0>;
 		};
 
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun50i-a64-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun50i-a64-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun50i-a64-emmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		gic: interrupt-controller@1c81000 {
 			compatible = "arm,gic-400";
 			reg = <0x01c81000 0x1000>,