| Message ID | b4046d2f593047400c190e438fd9d05128c293d9.1683034376.git.michal.simek@amd.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: zynqmp: Misc zynqmp changes | expand |
On 5/2/23 15:35, Michal Simek wrote: > SD card is connected with 4 data lines which should be described properly. > > Signed-off-by: Michal Simek <michal.simek@amd.com> > --- > > arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso | 1 + > arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso | 1 + > 2 files changed, 2 insertions(+) > > diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso > index 776444714fad..dcc51b3adab0 100644 > --- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso > +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso > @@ -136,6 +136,7 @@ &sdhci1 { /* on CC with tuned parameters */ > disable-wp; > xlnx,mio-bank = <1>; > assigned-clock-rates = <187498123>; > + bus-width = <4>; > }; > > &gem3 { /* required by spec */ > diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso > index 78d082a11492..3384df3d5920 100644 > --- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso > +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso > @@ -119,6 +119,7 @@ &sdhci1 { /* on CC with tuned parameters */ > clk-phase-uhs-sdr25 = <120>, <60>; > clk-phase-uhs-ddr50 = <126>, <48>; > assigned-clock-rates = <187498123>; > + bus-width = <4>; > }; > > &gem3 { /* required by spec */ Applied. M
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso index 776444714fad..dcc51b3adab0 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso @@ -136,6 +136,7 @@ &sdhci1 { /* on CC with tuned parameters */ disable-wp; xlnx,mio-bank = <1>; assigned-clock-rates = <187498123>; + bus-width = <4>; }; &gem3 { /* required by spec */ diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso index 78d082a11492..3384df3d5920 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso @@ -119,6 +119,7 @@ &sdhci1 { /* on CC with tuned parameters */ clk-phase-uhs-sdr25 = <120>, <60>; clk-phase-uhs-ddr50 = <126>, <48>; assigned-clock-rates = <187498123>; + bus-width = <4>; }; &gem3 { /* required by spec */
SD card is connected with 4 data lines which should be described properly. Signed-off-by: Michal Simek <michal.simek@amd.com> --- arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso | 1 + arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso | 1 + 2 files changed, 2 insertions(+)