From patchwork Mon May 27 22:03:14 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Arnaud Ebalard X-Patchwork-Id: 2621541 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-process-083081@patchwork1.kernel.org Received: from casper.infradead.org (casper.infradead.org [85.118.1.10]) by patchwork1.kernel.org (Postfix) with ESMTP id 8EEE13FD4E for ; Mon, 27 May 2013 22:03:08 +0000 (UTC) Received: from merlin.infradead.org ([2001:4978:20e::2]) by casper.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1Uh5VD-0004sw-8B; Mon, 27 May 2013 22:02:52 +0000 Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1Uh5V4-0008UH-3C; Mon, 27 May 2013 22:02:42 +0000 Received: from mic92-1-81-57-185-249.fbx.proxad.net ([81.57.185.249] helo=smtp.natisbad.org) by merlin.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1Uh5Uz-0008Tn-7z for linux-arm-kernel@lists.infradead.org; Mon, 27 May 2013 22:02:40 +0000 Received: by smtp.natisbad.org (Postfix, from userid 5001) id 29E5D2C0783; Tue, 28 May 2013 00:02:14 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=natisbad.org; s=mail; t=1369692134; bh=4n1htL5RkhAObbOUuviUgpnpfRcklG1Aejqvf7YM1tg=; h=From:To:Cc:Subject:In-Reply-To:References:Date; b=cw2hKEbZXz+vqZQL8vrzSCdLJpIi8iU7/XtQbcmEx0lZ0rL5FE3AqCFAb36eIldFc 2ViGutEcjIIO68kEzqLTs25G+j8Ivyfh5rWCcVUNOsmgkF9JskO8nY0sGz/Zfx9xj2 /5wsM9Qob6qUQJby3Iw4cfmP+LuFyh8foIX22AS8= X-Spam-Checker-Version: SpamAssassin 3.3.2 (2011-06-06) on petit X-Spam-Level: X-Spam-Status: No, score=-1.0 required=5.0 tests=ALL_TRUSTED, T_DKIM_INVALID autolearn=unavailable version=3.3.2 Received: from small (localhost [127.0.0.1]) by smtp.natisbad.org (Postfix) with ESMTP id 6D2132C0521; Tue, 28 May 2013 00:01:50 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=natisbad.org; s=mail; t=1369692110; bh=4n1htL5RkhAObbOUuviUgpnpfRcklG1Aejqvf7YM1tg=; h=From:To:Cc:Subject:In-Reply-To:References:Date; b=D7dvTO48Ny2+pkNY9xeByNz3FNh/Z3QQ11HiIuZ1wl5Kq8+tVoAvQWbh6TFGqIu5e cFNaaHaDLfDMoQN7O9sw3U5dV/xjvsAZjOfaNPAu/Vw1hcGrHW9W/F6mnwZNTtsg5w Haw9rn/vyopEFuRHWJYyjKFOsyq2XBjN6qsX7wWk= X-Hashcash: 1:20:130527:linux@roeck-us.net::yE6XU8z3Hwm+2WW8:00000000000000000000000000000000000000000002Z63 X-Hashcash: 1:20:130527:khali@linux-fr.org::YFRGBOzjOTZ5IJIn:00000000000000000000000000000000000000000003K/P X-Hashcash: 1:20:130527:grant.likely@secretlab.ca::M43sM4NAKq2lIon2:0000000000000000000000000000000000008AxV X-Hashcash: 1:20:130527:rob.herring@calxeda.com::/7h6MWiQB9BZPqoy:000000000000000000000000000000000000004xbq X-Hashcash: 1:20:130527:lm-sensors@lm-sensors.org::TM0rO7GNmM+QaWOD:0000000000000000000000000000000000000o9q X-Hashcash: 1:20:130527:devicetree-discuss@lists.ozlabs.org::hd6pXI/tFTa/Zs+L:000000000000000000000000004fwf X-Hashcash: 1:20:130527:rob@landley.net::cXWczLqVsDZ2/CbF:008JwF X-Hashcash: 1:20:130527:linux-doc@vger.kernel.org::YZeojYq4tVC3zv5I:0000000000000000000000000000000000001P8c X-Hashcash: 1:20:130527:linux-arm-kernel@lists.infradead.org::cjudXH4R1ePhwnJa:00000000000000000000000004Lr3 X-Hashcash: 1:20:130527:linux@arm.linux.org.uk::M8aOdG6JkynVis9/:00000000000000000000000000000000000000011qp X-Hashcash: 1:20:130527:andrew@lunn.ch::15GIm2ELc8t7Zy/k:0003Q8y X-Hashcash: 1:20:130527:jason@lakedaemon.net::rvrQVXTuj889/5dk:000000000000000000000000000000000000000008Axt X-Hashcash: 1:20:130527:simon.guinot@sequanux.org::7qwQ9k1ic3FflKFC:0000000000000000000000000000000000003tgj X-Hashcash: 1:20:130527:olivier.mouchet@gmail.com::kzQu3sNN+kSw+/KZ:00000000000000000000000000000000000021MJ From: arno@natisbad.org (Arnaud Ebalard) To: Guenter Roeck Subject: [PATCHv2 1/3] Add support for GMT G762/G763 PWM fan controller In-Reply-To: References: Message-Id: X-PGP-Key-URL: http://natisbad.org/arno@natisbad.org.asc X-Fingerprint: D3A5 B68A 839B 38A5 815A 781B B77C 0748 A7AE 341B Date: Tue, 28 May 2013 00:03:14 +0200 User-Agent: Gnus/5.13 (Gnus v5.13) Emacs/24.3 (gnu/linux) MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20130527_180237_816912_E8F02E60 X-CRM114-Status: GOOD ( 32.86 ) X-Spam-Score: -1.0 (-) X-Spam-Report: SpamAssassin version 3.3.2 on merlin.infradead.org summary: Content analysis details: (-1.0 points) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 SPF_PASS SPF: sender matches SPF record -1.9 BAYES_00 BODY: Bayes spam probability is 0 to 1% [score: 0.0000] -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature 1.0 RDNS_DYNAMIC Delivered to internal network by host with dynamic-looking rDNS Cc: Andrew Lunn , Russell King - ARM Linux , Jason Cooper , linux-doc@vger.kernel.org, devicetree-discuss@lists.ozlabs.org, Olivier Mouchet , Rob Herring , lm-sensors@lm-sensors.org, Grant Likely , Rob Landley , Jean Delvare , Linux ARM Kernel Mailing List , Simon Guinot X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org Signed-off-by: Arnaud Ebalard --- drivers/hwmon/Kconfig | 10 + drivers/hwmon/Makefile | 1 + drivers/hwmon/g762.c | 1012 ++++++++++++++++++++++++++++++++++++ include/linux/platform_data/g762.h | 54 ++ 4 files changed, 1077 insertions(+) create mode 100644 drivers/hwmon/g762.c create mode 100644 include/linux/platform_data/g762.h diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 0428e8a..142bdf8 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -456,6 +456,16 @@ config SENSORS_G760A This driver can also be built as a module. If so, the module will be called g760a. +config SENSORS_G762 + tristate "GMT G762 and G763" + depends on I2C + help + If you say yes here you get support for Global Mixed-mode + Technology Inc G762 and G763 fan speed PWM controller chips. + + This driver can also be built as a module. If so, the module + will be called g762. + config SENSORS_GL518SM tristate "Genesys Logic GL518SM" depends on I2C diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index d17d3e6..4f0fb52 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -60,6 +60,7 @@ obj-$(CONFIG_SENSORS_F75375S) += f75375s.o obj-$(CONFIG_SENSORS_FAM15H_POWER) += fam15h_power.o obj-$(CONFIG_SENSORS_FSCHMD) += fschmd.o obj-$(CONFIG_SENSORS_G760A) += g760a.o +obj-$(CONFIG_SENSORS_G762) += g762.o obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o obj-$(CONFIG_SENSORS_GPIO_FAN) += gpio-fan.o diff --git a/drivers/hwmon/g762.c b/drivers/hwmon/g762.c new file mode 100644 index 0000000..d21ec24 --- /dev/null +++ b/drivers/hwmon/g762.c @@ -0,0 +1,1012 @@ +/* + * g762 - Driver for the Global Mixed-mode Technology Inc. fan speed + * PWM controller chips from G762 family, i.e. G762 and G763 + * + * Copyright (C) 2013, Arnaud EBALARD + * + * This work is based on a basic version for 2.6.31 kernel developed + * by Olivier Mouchet for LaCie. Updates and correction have been + * performed to run on recent kernels. Additional features, like the + * ability to configure various characteristics via .dts file, have + * been added. Detailed datasheet on which this development is based + * is available here: + * + * http://natisbad.org/NAS/refs/GMT_EDS-762_763-080710-0.2.pdf + * + * Headers from previous developments have been kept below: + * + * Copyright (c) 2009 LaCie + * + * Author: Olivier Mouchet + * + * based on g760a code written by Herbert Valerio Riedel + * Copyright (C) 2007 Herbert Valerio Riedel + * + * g762: minimal datasheet available at: + * http://www.gmt.com.tw/product/datasheet/EDS-762_3.pdf + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRVNAME "g762" + +static const struct i2c_device_id g762_id[] = { + { "g762", 0 }, + { "g763", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, g762_id); + +enum g762_regs { + G762_REG_SET_CNT = 0x00, + G762_REG_ACT_CNT = 0x01, + G762_REG_FAN_STA = 0x02, + G762_REG_SET_OUT = 0x03, + G762_REG_FAN_CMD1 = 0x04, + G762_REG_FAN_CMD2 = 0x05, +}; + +/* Config register bits */ +#define G762_REG_FAN_CMD1_DET_FAN_FAIL 0x80 /* enable fan_fail signal */ +#define G762_REG_FAN_CMD1_DET_FAN_OOC 0x40 /* enable fan_out_of_control */ +#define G762_REG_FAN_CMD1_OUT_MODE 0x20 /* out mode, PWM or DC */ +#define G762_REG_FAN_CMD1_FAN_MODE 0x10 /* fan mode: closed/open loop */ +#define G762_REG_FAN_CMD1_CLK_DIV_ID1 0x08 /* clock divisor value */ +#define G762_REG_FAN_CMD1_CLK_DIV_ID0 0x04 +#define G762_REG_FAN_CMD1_PWM_POLARITY 0x02 /* PWM polarity */ +#define G762_REG_FAN_CMD1_PULSE_PER_REV 0x01 /* pulse per fan revolution */ + +#define G762_REG_FAN_CMD2_GEAR_MODE_1 0x08 /* fan gear mode */ +#define G762_REG_FAN_CMD2_GEAR_MODE_0 0x04 +#define G762_REG_FAN_CMD2_FAN_STARTV_1 0x02 /* fan startup voltage */ +#define G762_REG_FAN_CMD2_FAN_STARTV_0 0x01 + +#define G762_REG_FAN_STA_FAIL 0x02 /* fan fail */ +#define G762_REG_FAN_STA_OOC 0x01 /* fan out of control */ + +/* config register values */ +#define OUT_MODE_PWM 1 +#define OUT_MODE_DC 0 + +#define FAN_MODE_CLOSED_LOOP 2 +#define FAN_MODE_OPEN_LOOP 1 + +/* register data is read (and cached) at most once per second */ +#define G762_UPDATE_INTERVAL HZ + +/* + * extract pulse count per fan revolution value (2 or 4) from given + * FAN_CMD1 register value + */ +#define PULSE_FROM_REG(reg) \ + ((((reg) & G762_REG_FAN_CMD1_PULSE_PER_REV)+1) << 1) + +/* + * extract fan clock divisor (1, 2, 4 or 8) from given FAN_CMD1 + * register value + */ +#define CLKDIV_FROM_REG(reg) \ + (1 << (((reg) & (G762_REG_FAN_CMD1_CLK_DIV_ID0 | \ + G762_REG_FAN_CMD1_CLK_DIV_ID1)) >> 2)) + +/* + * extract fan gear mode multiplier value (0, 2 or 4) from given + * FAN_CMD2 register value + */ +#define GEARMULT_FROM_REG(reg) \ + (1 << (((reg) & (G762_REG_FAN_CMD2_GEAR_MODE_0 | \ + G762_REG_FAN_CMD2_GEAR_MODE_1)) >> 2)) + +struct g762_data { + struct i2c_client *client; + struct device *hwmon_dev; + + /* update mutex */ + struct mutex update_lock; + + /* board specific parameters. */ + u32 clk; + + /* g762 register cache */ + bool valid; + unsigned long last_updated; /* in jiffies */ + + u8 set_cnt; /* controls fan rotation speed in closed-loop mode */ + u8 act_cnt; /* provides access to current fan RPM value */ + u8 fan_sta; /* bit 0: set when actual fan speed is more than + * 25% outside requested fan speed + * bit 1: set when no transition occurs on fan + * pin for 0.7s + */ + u8 set_out; /* controls fan rotation speed in open-loop mode */ + u8 fan_cmd1; /* 0: FG_PLS_ID0 FG pulses count per revolution + * 0: 2 counts per revolution + * 1: 4 counts per revolution + * 1: PWM_POLARITY 1: negative_duty + * 0: positive_duty + * 2,3: [FG_CLOCK_ID0, FG_CLK_ID1] + * 00: Divide fan clock by 1 + * 01: Divide fan clock by 2 + * 10: Divide fan clock by 4 + * 11: Divide fan clock by 8 + * 4: FAN_MODE 1:closed-loop, 0:open-loop + * 5: OUT_MODE 1:PWM, 0:DC + * 6: DET_FAN_OOC enable "fan ooc" status + * 7: DET_FAN_FAIL enable "fan fail" status + */ + u8 fan_cmd2; /* 0,1: FAN_STARTV 0,1,2,3 -> 0,32,64,96 dac_code + * 2,3: FG_GEAR_MODE + * 00: multiplier = 1 + * 01: multiplier = 2 + * 10: multiplier = 4 + * 4: Mask ALERT# (g763 only) + */ +}; + +/* + * sysfs PWM interface uses value from 0 to 255 when g762 FAN_SET_CNT register + * uses values from 255 (off) to 0 (full speed). Note that FAN_SET_OUT register + * uses values from 0 (off) to 255 (full speed), i.e. does not need translation. + */ +#define PWM_FROM_CNT(cnt) (0xff - (cnt)) +#define PWM_TO_CNT(pwm) (0xff - (pwm)) + +/* + * Convert count value from fan controller registers (FAN_SET_CNT/FAN_ACT_CNT) + * into fan speed RPM value. Note that the datasheet documents a basic formula. + * Influence of additional parameters (fan clock divisor, fan gear mode) have + * been infered from examples in the datasheet and tests. + */ +static inline unsigned int rpm_from_cnt(u8 cnt, u32 clk, u16 p, + u8 clk_div, u8 gear_mult) +{ + if (cnt == 0xff) /* cnt to 255 stops the fan */ + return 0; + + return (clk*30*gear_mult)/((cnt ? cnt : 1)*p*clk_div); +} + +/* Convert fan RPM value from sysfs into count value for fan controller register + * (FAN_SET_CNT). */ +static inline unsigned char cnt_from_rpm(u32 rpm, u32 clk, u16 p, + u8 clk_div, u8 gear_mult) +{ + if (!rpm) /* to stop the fan, set cnt to 255 */ + return 0xff; + + return clamp_val(((clk*30*gear_mult)/(rpm*p*clk_div)), 0, 255); +} + +/* helper to grab and cache data, at most one time per second */ +static struct g762_data *g762_update_client(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct g762_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + if (time_before(jiffies, data->last_updated + G762_UPDATE_INTERVAL) && + likely(data->valid)) + goto out; + + data->set_cnt = i2c_smbus_read_byte_data(client, G762_REG_SET_CNT); + data->act_cnt = i2c_smbus_read_byte_data(client, G762_REG_ACT_CNT); + data->fan_sta = i2c_smbus_read_byte_data(client, G762_REG_FAN_STA); + data->set_out = i2c_smbus_read_byte_data(client, G762_REG_SET_OUT); + data->fan_cmd1 = i2c_smbus_read_byte_data(client, G762_REG_FAN_CMD1); + data->fan_cmd2 = i2c_smbus_read_byte_data(client, G762_REG_FAN_CMD2); + + data->last_updated = jiffies; + data->valid = true; + out: + mutex_unlock(&data->update_lock); + + return data; +} + +/* + * helpers for passing hardware characteristics via DT. Some of those + * are also used by sysfs handlers (write functions) later in the file. + */ + +/* Set pwm mode. Accepts either 0 (PWM mode) or 1 (DC mode) */ +static int do_set_pwm_mode(struct device *dev, unsigned long val) +{ + struct i2c_client *client = to_i2c_client(dev); + struct g762_data *data = g762_update_client(dev); + int ret = -EINVAL; + + mutex_lock(&data->update_lock); + switch (val) { + case OUT_MODE_PWM: + data->fan_cmd1 |= G762_REG_FAN_CMD1_OUT_MODE; + break; + case OUT_MODE_DC: + data->fan_cmd1 &= ~G762_REG_FAN_CMD1_OUT_MODE; + break; + default: + goto out; + } + ret = i2c_smbus_write_byte_data(client, G762_REG_FAN_CMD1, + data->fan_cmd1); + data->valid = false; + out: + mutex_unlock(&data->update_lock); + + return ret; +} + +/* + * Set reference clock. Accepted values are between 0 and 0xffffff. + * Note that this is a characteristics of the system but an internal + * parameter, i.e. value is not passed to the device. + */ +static int do_set_pwm_freq(struct device *dev, unsigned long val) +{ + struct i2c_client *client = to_i2c_client(dev); + struct g762_data *data = i2c_get_clientdata(client); + + if (val > 0xffffff) + return -EINVAL; + + data->clk = val; + + return 0; +} + +/* Set fan clock divisor. Accepted values are 1, 2, 4 and 8. */ +static int do_set_fan_div(struct device *dev, unsigned long val) +{ + struct i2c_client *client = to_i2c_client(dev); + struct g762_data *data = g762_update_client(dev); + int ret = -EINVAL; + + mutex_lock(&data->update_lock); + switch (val) { + case 1: + data->fan_cmd1 &= ~G762_REG_FAN_CMD1_CLK_DIV_ID0; + data->fan_cmd1 &= ~G762_REG_FAN_CMD1_CLK_DIV_ID1; + break; + case 2: + data->fan_cmd1 |= G762_REG_FAN_CMD1_CLK_DIV_ID0; + data->fan_cmd1 &= ~G762_REG_FAN_CMD1_CLK_DIV_ID1; + break; + case 4: + data->fan_cmd1 &= ~G762_REG_FAN_CMD1_CLK_DIV_ID0; + data->fan_cmd1 |= G762_REG_FAN_CMD1_CLK_DIV_ID1; + break; + case 8: + data->fan_cmd1 |= G762_REG_FAN_CMD1_CLK_DIV_ID0; + data->fan_cmd1 |= G762_REG_FAN_CMD1_CLK_DIV_ID1; + break; + default: + goto out; + } + ret = i2c_smbus_write_byte_data(client, G762_REG_FAN_CMD1, + data->fan_cmd1); + data->valid = false; + out: + mutex_unlock(&data->update_lock); + + return ret; +} + +/* Set fan gear mode. Accepted values are either 0, 1 or 2. */ +static int do_set_fan_gear_mode(struct device *dev, unsigned long val) +{ + struct i2c_client *client = to_i2c_client(dev); + struct g762_data *data = g762_update_client(dev); + int ret = -EINVAL; + + mutex_lock(&data->update_lock); + switch (val) { + case 0: + data->fan_cmd2 &= ~G762_REG_FAN_CMD2_GEAR_MODE_0; + data->fan_cmd2 &= ~G762_REG_FAN_CMD2_GEAR_MODE_1; + break; + case 1: + data->fan_cmd2 |= G762_REG_FAN_CMD2_GEAR_MODE_0; + data->fan_cmd2 &= ~G762_REG_FAN_CMD2_GEAR_MODE_1; + break; + case 2: + data->fan_cmd2 &= ~G762_REG_FAN_CMD2_GEAR_MODE_0; + data->fan_cmd2 |= G762_REG_FAN_CMD2_GEAR_MODE_1; + break; + default: + goto out; + } + ret = i2c_smbus_write_byte_data(client, G762_REG_FAN_CMD2, + data->fan_cmd2); + data->valid = false; + out: + mutex_unlock(&data->update_lock); + + return ret; +} + +/* Set pulse per revolution value. Accepts either 2 or 4. */ +static int do_set_fan_pulses(struct device *dev, unsigned long val) +{ + struct i2c_client *client = to_i2c_client(dev); + struct g762_data *data = g762_update_client(dev); + int ret = -EINVAL; + + mutex_lock(&data->update_lock); + switch (val) { + case 2: + data->fan_cmd1 &= ~G762_REG_FAN_CMD1_PULSE_PER_REV; + break; + case 4: + data->fan_cmd1 |= G762_REG_FAN_CMD1_PULSE_PER_REV; + break; + default: + goto out; + } + ret = i2c_smbus_write_byte_data(client, G762_REG_FAN_CMD1, + data->fan_cmd1); + data->valid = false; + out: + mutex_unlock(&data->update_lock); + + return ret; +} + +/* Set fan mode. Accepts either 1 (open-loop) or 2 (closed-loop). */ +static int do_set_pwm_enable(struct device *dev, unsigned long val) +{ + struct i2c_client *client = to_i2c_client(dev); + struct g762_data *data = g762_update_client(dev); + int ret = -EINVAL; + + mutex_lock(&data->update_lock); + switch (val) { + case FAN_MODE_OPEN_LOOP: + data->fan_cmd1 &= ~G762_REG_FAN_CMD1_FAN_MODE; + break; + case FAN_MODE_CLOSED_LOOP: + data->fan_cmd1 |= G762_REG_FAN_CMD1_FAN_MODE; + break; + default: + goto out; + } + + ret = i2c_smbus_write_byte_data(client, G762_REG_FAN_CMD1, + data->fan_cmd1); + data->valid = false; + out: + mutex_unlock(&data->update_lock); + + return ret; +} + +/* Set PWM polarity (0 for negative duty, 1 for positive duty) */ +static int do_set_pwm_polarity(struct device *dev, unsigned long val) +{ + struct i2c_client *client = to_i2c_client(dev); + struct g762_data *data = g762_update_client(dev); + int ret = -EINVAL; + + mutex_lock(&data->update_lock); + switch (val) { + case 0: /* i.e. negative duty */ + data->fan_cmd1 &= ~G762_REG_FAN_CMD1_PWM_POLARITY; + break; + case 1: /* i.e. positive duty */ + data->fan_cmd1 |= G762_REG_FAN_CMD1_PWM_POLARITY; + break; + default: + goto out; + } + ret = i2c_smbus_write_byte_data(client, G762_REG_FAN_CMD1, + data->fan_cmd1); + data->valid = false; + out: + mutex_unlock(&data->update_lock); + + return ret; +} + +/* + * Set pwm value. Accepted values are between 0 (stops the fan) and 255 (full + * speed). Note that the chip register used for setting the value depends on + * current fan mode of the device (closed or open-loop). + */ +static int do_set_pwm(struct device *dev, unsigned long val) +{ + struct i2c_client *client = to_i2c_client(dev); + struct g762_data *data = g762_update_client(dev); + int ret; + u8 reg; + + if (val > 255) + return -EINVAL; + + mutex_lock(&data->update_lock); + if (data->fan_cmd1 & G762_REG_FAN_CMD1_FAN_MODE) { /* closed-loop */ + val = PWM_TO_CNT(val); + data->set_cnt = val; + reg = G762_REG_SET_CNT; + } else { /* open-loop */ + data->set_out = val; + reg = G762_REG_SET_OUT; + } + ret = i2c_smbus_write_byte_data(client, reg, (u8)val); + data->valid = false; + mutex_unlock(&data->update_lock); + + return ret; +} + +/* Set fan RPM value. This only makes sense in closed-loop mode. */ +static int do_set_fan_target(struct device *dev, unsigned long val) +{ + struct i2c_client *client = to_i2c_client(dev); + struct g762_data *data = g762_update_client(dev); + int ret = -EINVAL; + + mutex_lock(&data->update_lock); + if (data->fan_cmd1 & G762_REG_FAN_CMD1_FAN_MODE) { /* closed-loop */ + data->set_cnt = cnt_from_rpm(val, data->clk, + PULSE_FROM_REG(data->fan_cmd1), + CLKDIV_FROM_REG(data->fan_cmd1), + GEARMULT_FROM_REG(data->fan_cmd2)); + ret = i2c_smbus_write_byte_data(client, G762_REG_SET_CNT, + data->set_cnt); + data->valid = false; + } + mutex_unlock(&data->update_lock); + + return ret; +} + +/* Enable/disable fan failure detection. Accepted values are 1 and 0. */ +static int do_fan_failure_detection_toggle(struct device *dev, + unsigned long enable) +{ + struct i2c_client *client = to_i2c_client(dev); + struct g762_data *data = g762_update_client(dev); + int ret = -EINVAL; + + mutex_lock(&data->update_lock); + switch (enable) { + case 0: + data->fan_cmd1 &= ~G762_REG_FAN_CMD1_DET_FAN_FAIL; + break; + case 1: + data->fan_cmd1 |= G762_REG_FAN_CMD1_DET_FAN_FAIL; + break; + default: + goto out; + } + ret = i2c_smbus_write_byte_data(client, G762_REG_FAN_CMD1, + data->fan_cmd1); + data->valid = false; + out: + mutex_unlock(&data->update_lock); + + return ret; +} + +/* Enable/disable fan out of control detection. Accepted values are 1 and 0 */ +static int do_fan_ooc_detection_toggle(struct device *dev, unsigned int enable) +{ + struct i2c_client *client = to_i2c_client(dev); + struct g762_data *data = g762_update_client(dev); + int ret = -EINVAL; + + mutex_lock(&data->update_lock); + switch (enable) { + case 0: + data->fan_cmd1 &= ~G762_REG_FAN_CMD1_DET_FAN_OOC; + break; + case 1: + data->fan_cmd1 |= G762_REG_FAN_CMD1_DET_FAN_OOC; + break; + default: + goto out; + } + ret = i2c_smbus_write_byte_data(client, G762_REG_FAN_CMD1, + data->fan_cmd1); + out: + mutex_unlock(&data->update_lock); + + return ret; +} + +/* Set fan startup voltage. Accepted values are either 0, 1, 2 or 3. */ +static int do_set_fan_startv(struct device *dev, unsigned long val) +{ + struct i2c_client *client = to_i2c_client(dev); + struct g762_data *data = g762_update_client(dev); + int ret = -EINVAL; + + mutex_lock(&data->update_lock); + switch (val) { + case 0: + data->fan_cmd2 &= ~G762_REG_FAN_CMD2_FAN_STARTV_0; + data->fan_cmd2 &= ~G762_REG_FAN_CMD2_FAN_STARTV_1; + data->valid = false; + break; + case 1: + data->fan_cmd2 |= G762_REG_FAN_CMD2_FAN_STARTV_0; + data->fan_cmd2 &= ~G762_REG_FAN_CMD2_FAN_STARTV_1; + data->valid = false; + break; + case 2: + data->fan_cmd2 &= ~G762_REG_FAN_CMD2_FAN_STARTV_0; + data->fan_cmd2 |= G762_REG_FAN_CMD2_FAN_STARTV_1; + data->valid = false; + break; + case 3: + data->fan_cmd2 |= G762_REG_FAN_CMD2_FAN_STARTV_0; + data->fan_cmd2 |= G762_REG_FAN_CMD2_FAN_STARTV_1; + data->valid = false; + break; + default: + goto out; + } + ret = i2c_smbus_write_byte_data(client, G762_REG_FAN_CMD2, + data->fan_cmd2); + data->valid = false; + out: + mutex_unlock(&data->update_lock); + + return ret; +} + +/* + * Configuration-related definitions + */ + +static inline void g762_platform_data_init(struct g762_platform_data *pdata) +{ + *pdata = G762_DEFAULT_PDATA; +} + +static inline int g762_one_prop_commit(struct i2c_client *client, + u32 pval, const char *pname, + int (*psetter)(struct device *dev, + unsigned long val)) +{ + int ret = 0; + + if ((pval != G762_DEFAULT_NO_OVERLOAD) && + (*psetter)(&client->dev, pval)) { + dev_err(&client->dev, "unable to set %s (%d)\n", pname, pval); + ret = -EINVAL; + } + + return ret; +} + +static int g762_platform_data_commit(struct i2c_client *client, + struct g762_platform_data *pdata) +{ + int ret = 0; + + if (g762_one_prop_commit(client, pdata->fan_startv, + "fan_startv", do_set_fan_startv) || + g762_one_prop_commit(client, pdata->fan_div, + "fan_div", do_set_fan_div) || + g762_one_prop_commit(client, pdata->fan_pulses, + "fan_pulses", do_set_fan_pulses) || + g762_one_prop_commit(client, pdata->pwm_freq, + "pwm_freq", do_set_pwm_freq) || + g762_one_prop_commit(client, pdata->fan_gear_mode, + "fan_gear_mode", do_set_fan_gear_mode) || + g762_one_prop_commit(client, pdata->pwm_polarity, + "pwm_polarity", do_set_pwm_polarity) || + g762_one_prop_commit(client, pdata->pwm_mode, + "pwm_mode", do_set_pwm_mode) || + g762_one_prop_commit(client, pdata->pwm_enable, + "pwm_enable", do_set_pwm_enable) || + g762_one_prop_commit(client, pdata->fan_target, + "fan_target", do_set_fan_target)) { + ret = -EINVAL; + } + + return ret; +} + +/* + * Helpers to import hardware characteristics from .dts file and overload + * default platform data values. + */ + +#ifdef CONFIG_OF +static struct of_device_id g762_dt_match[] = { + { .compatible = "gmt,g762" }, + { .compatible = "gmt,g763" }, + { }, +}; + +static inline void g762_of_import_one_prop(struct i2c_client *client, + u32 *dest, const char *pname) +{ + const __be32 *prop; + int len; + + prop = of_get_property(client->dev.of_node, pname, &len); + if (prop && len == sizeof(u32)) { + *dest = be32_to_cpu(prop[0]); + dev_dbg(&client->dev, "found %s (%d)\n", pname, *dest); + } +} + +static void g762_platform_data_of_overload(struct i2c_client *client, + struct g762_platform_data *pdata) +{ + if (!client->dev.of_node) + return; + + g762_of_import_one_prop(client, &pdata->fan_gear_mode, "fan_gear_mode"); + g762_of_import_one_prop(client, &pdata->pwm_polarity, "pwm_polarity"); + g762_of_import_one_prop(client, &pdata->fan_startv, "fan_startv"); + g762_of_import_one_prop(client, &pdata->pwm_freq, "pwm_freq"); + g762_of_import_one_prop(client, &pdata->fan_div, "fan_div"); + g762_of_import_one_prop(client, &pdata->fan_pulses, "fan_pulses"); + g762_of_import_one_prop(client, &pdata->pwm_mode, "pwm_mode"); + g762_of_import_one_prop(client, &pdata->fan_target, "fan_target"); + g762_of_import_one_prop(client, &pdata->pwm_enable, "pwm_enable"); +} +#else +static void g762_platform_data_of_overload(struct i2c_client *client, + struct g762_platform_data *pdata) { } +#endif + +/* + * helper to overload driver parameters from board init file for those + * not already converted to device tree + */ +static void g762_platform_data_overload(struct i2c_client *client, + struct g762_platform_data *pdata) +{ + struct g762_platform_data *opdata = client->dev.platform_data; + + if (opdata) + *pdata = *opdata; +} + +/* + * sysfs attributes + */ + +/* + * Read function for fan1_input sysfs file. Return current fan RPM value, or + * 0 if fan is out of control. The function is available in both closed and + * open-loop mode. + */ +static ssize_t get_fan_rpm(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct g762_data *data = g762_update_client(dev); + unsigned int rpm = 0; + + mutex_lock(&data->update_lock); + /* reverse logic: fan out of control reporting is enabled low */ + if (data->fan_sta & G762_REG_FAN_STA_OOC) { + rpm = rpm_from_cnt(data->act_cnt, data->clk, + PULSE_FROM_REG(data->fan_cmd1), + CLKDIV_FROM_REG(data->fan_cmd1), + GEARMULT_FROM_REG(data->fan_cmd2)); + } + mutex_unlock(&data->update_lock); + + return sprintf(buf, "%u\n", rpm); +} + +/* + * Read and write functions for pwm1_mode sysfs file. Get and set fan speed + * control mode i.e. PWM (1) or DC (0). + */ +static ssize_t get_pwm_mode(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct g762_data *data = g762_update_client(dev); + + return sprintf(buf, "%d\n", + !!(data->fan_cmd1 & G762_REG_FAN_CMD1_OUT_MODE)); +} + +static ssize_t set_pwm_mode(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + unsigned long val; + + if (kstrtoul(buf, 10, &val) || do_set_pwm_mode(dev, val)) + return -EINVAL; + + return count; +} + +/* + * Read and write functions for fan1_div sysfs file. Get and set fan + * controller prescaler value + */ +static ssize_t get_fan_div(struct device *dev, + struct device_attribute *da, char *buf) +{ + struct g762_data *data = g762_update_client(dev); + + return sprintf(buf, "%d\n", CLKDIV_FROM_REG(data->fan_cmd1)); +} + +static ssize_t set_fan_div(struct device *dev, + struct device_attribute *da, + const char *buf, size_t count) +{ + unsigned long val; + + if (kstrtoul(buf, 10, &val) || do_set_fan_div(dev, val)) + return -EINVAL; + + return count; +} + +/* + * Read and write functions for pwm1_enable. Get and set the fan speed control + * mode (i.e. closed or open-loop). + * + * Following documentation about hwmon's sysfs interface, a pwm1_enable node + * should accept followings: + * + * 0 : no fan speed control (i.e. fan at full speed) + * 1 : manual fan speed control enabled (use pwm[1-*]) (open-loop) + * 2+: automatic fan speed control enabled (use fan[1-*]_target) (closed-loop) + * + * but we do not accept 0 as "no-control" mode is not supported by g762, + * -EINVAL is returned in this case. + */ +static ssize_t get_pwm_enable(struct device *dev, + struct device_attribute *da, char *buf) +{ + struct g762_data *data = g762_update_client(dev); + + return sprintf(buf, "%d\n", + (!!(data->fan_cmd1 & G762_REG_FAN_CMD1_FAN_MODE)) + 1); +} + +static ssize_t set_pwm_enable(struct device *dev, + struct device_attribute *da, + const char *buf, size_t count) +{ + unsigned long val; + + if (kstrtoul(buf, 10, &val) || do_set_pwm_enable(dev, val)) + return -EINVAL; + + return count; +} + +/* + * Read and write functions for pwm1 sysfs file. Get and set the fan speed + * in both open and closed-loop mode. Speed is given as a relative value + * between 0 and 255, where 255 is maximum speed. Note that due to rounding + * errors it is possible that you don't read back exactly the value you have + * set. + */ +static ssize_t get_pwm(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct g762_data *data = g762_update_client(dev); + int val; + + mutex_lock(&data->update_lock); + if (data->fan_cmd1 & G762_REG_FAN_CMD1_FAN_MODE) { /* closed-loop */ + val = PWM_FROM_CNT(data->set_cnt); + } else { /* open-loop */ + val = data->set_out; + } + mutex_unlock(&data->update_lock); + + return sprintf(buf, "%d\n", val); +} + +static ssize_t set_pwm(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + unsigned long val; + + if (kstrtoul(buf, 10, &val) || do_set_pwm(dev, val)) + return -EINVAL; + + return count; +} + +/* + * Read and write function for fan1_target sysfs file. Get/set the fan speed in + * closed-loop mode. Speed is given as a RPM value; then the chip will regulate + * the fan speed using pulses from fan tachometer. The functions both return + * -EINVAL when called in open-loop mode. + * + * Refer to rpm_from_cnt() implementation above to get info about count number + * calculation. + * + * Also note that due to rounding errors it is possible that you don't read + * back exactly the value you have set. + */ +static ssize_t get_fan_target(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct g762_data *data = g762_update_client(dev); + unsigned int rpm; + ssize_t ret = -EINVAL; + + mutex_lock(&data->update_lock); + if (data->fan_cmd1 & G762_REG_FAN_CMD1_FAN_MODE) { /* closed-loop */ + rpm = rpm_from_cnt(data->set_cnt, data->clk, + PULSE_FROM_REG(data->fan_cmd1), + CLKDIV_FROM_REG(data->fan_cmd1), + GEARMULT_FROM_REG(data->fan_cmd2)); + ret = sprintf(buf, "%u\n", rpm); + } + mutex_unlock(&data->update_lock); + + return ret; +} + +static ssize_t set_fan_target(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + unsigned long val; + + if (kstrtoul(buf, 10, &val) || do_set_fan_target(dev, val)) + return -EINVAL; + + return count; +} + +/* read function for fan1_fault sysfs file. */ +static ssize_t get_fan_failure(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct g762_data *data = g762_update_client(dev); + + return sprintf(buf, "%u\n", !!(data->fan_sta & G762_REG_FAN_STA_FAIL)); +} + +/* + * read function for fan1_alarm sysfs file. Note that OOC confition is + * enabled low + */ +static ssize_t get_fan_ooc(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct g762_data *data = g762_update_client(dev); + + return sprintf(buf, "%u\n", !(data->fan_sta & G762_REG_FAN_STA_OOC)); +} + +static DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, get_pwm, set_pwm); +static DEVICE_ATTR(pwm1_mode, S_IWUSR | S_IRUGO, get_pwm_mode, set_pwm_mode); +static DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, + get_pwm_enable, set_pwm_enable); +static DEVICE_ATTR(fan1_input, S_IRUGO, get_fan_rpm, NULL); +static DEVICE_ATTR(fan1_alarm, S_IRUGO, get_fan_ooc, NULL); +static DEVICE_ATTR(fan1_fault, S_IRUGO, get_fan_failure, NULL); +static DEVICE_ATTR(fan1_target, S_IWUSR | S_IRUGO, + get_fan_target, set_fan_target); +static DEVICE_ATTR(fan1_div, S_IWUSR | S_IRUGO, get_fan_div, set_fan_div); + +/* Driver data */ +static struct attribute *g762_attributes[] = { + &dev_attr_fan1_input.attr, + &dev_attr_fan1_alarm.attr, + &dev_attr_fan1_fault.attr, + &dev_attr_fan1_target.attr, + &dev_attr_fan1_div.attr, + &dev_attr_pwm1.attr, + &dev_attr_pwm1_mode.attr, + &dev_attr_pwm1_enable.attr, + NULL +}; + +static const struct attribute_group g762_group = { + .attrs = g762_attributes, +}; + +static int g762_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct g762_data *data; + struct g762_platform_data pdata; + int err; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + data = devm_kzalloc(&client->dev, sizeof(struct g762_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + i2c_set_clientdata(client, data); + + data->client = client; + mutex_init(&data->update_lock); + + /* Enable fan protection and fan fail detection by default */ + do_fan_ooc_detection_toggle(&client->dev, 1); + do_fan_failure_detection_toggle(&client->dev, 1); + + /* + * Set default configuration values before passing the structure + * first to overload routine used by boards non converted to DT and + * then to OF helper (to overload them using those provided by .dts + * file, if any). Final result is then commited. + */ + g762_platform_data_init(&pdata); + g762_platform_data_overload(client, &pdata); + g762_platform_data_of_overload(client, &pdata); + err = g762_platform_data_commit(client, &pdata); + if (err) + return err; + + /* Register sysfs hooks */ + err = sysfs_create_group(&client->dev.kobj, &g762_group); + if (err) + return err; + + data->hwmon_dev = (struct device *)hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + goto err_out; + } + + return 0; + + err_out: + sysfs_remove_group(&client->dev.kobj, &g762_group); + return err; +} + +static int g762_remove(struct i2c_client *client) +{ + struct g762_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &g762_group); + + return 0; +} + +static struct i2c_driver g762_driver = { + .driver = { + .name = DRVNAME, + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(g762_dt_match), + }, + .probe = g762_probe, + .remove = g762_remove, + .id_table = g762_id, +}; + +module_i2c_driver(g762_driver); + +MODULE_AUTHOR("Arnaud EBALARD "); +MODULE_DESCRIPTION("GMT G762/G763 driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/platform_data/g762.h b/include/linux/platform_data/g762.h new file mode 100644 index 0000000..29e3934 --- /dev/null +++ b/include/linux/platform_data/g762.h @@ -0,0 +1,54 @@ +/* + * Platform data structure for g762 fan controller driver + * + * Copyright (C) 2013, Arnaud EBALARD + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __LINUX_PLATFORM_DATA_G762_H__ +#define __LINUX_PLATFORM_DATA_G762_H__ + +#define G762_DEFAULT_NO_OVERLOAD 0xffffffff + +struct g762_platform_data { + u32 fan_startv; + u32 fan_gear_mode; + u32 fan_div; + u32 fan_pulses; + u32 fan_target; + u32 pwm_polarity; + u32 pwm_enable; + u32 pwm_freq; + u32 pwm_mode; +}; + +/* When filling a g762_platform_data structure to be passed during platform + * init to the driver, it needs to be initialized to the following default + * value before changing specific fields. This is needed to avoid a sparse + * initialization to have current values replaced by 0 */ + +static const struct g762_platform_data G762_DEFAULT_PDATA = { + .fan_startv = G762_DEFAULT_NO_OVERLOAD, + .fan_gear_mode = G762_DEFAULT_NO_OVERLOAD, + .fan_div = G762_DEFAULT_NO_OVERLOAD, + .fan_pulses = G762_DEFAULT_NO_OVERLOAD, + .fan_target = G762_DEFAULT_NO_OVERLOAD, + .pwm_polarity = G762_DEFAULT_NO_OVERLOAD, + .pwm_enable = G762_DEFAULT_NO_OVERLOAD, + .pwm_freq = G762_DEFAULT_NO_OVERLOAD, + .pwm_mode = G762_DEFAULT_NO_OVERLOAD, +}; + +#endif /* __LINUX_PLATFORM_DATA_G762_H__ */