diff mbox

arm64: Implement arch_setup_pdev_archdata hook

Message ID b4645ade4a4d4150e76594f5bf04a3ad5e7d5221.1465287808.git.baolin.wang@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

(Exiting) Baolin Wang June 7, 2016, 8:29 a.m. UTC
Now on ARM64 platform, it will set 'dummy_dma_ops' for device dma_ops if
it did not call 'arch_setup_dma_ops' at device creation time by issuing
platform_device_alloc() function, that will cause failure when setting
the dma mask for device.

Hence We need to hook the archdata to setup proper dma_ops for these devices.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
 arch/arm64/mm/dma-mapping.c |   21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

Comments

Arnd Bergmann June 7, 2016, 8:43 a.m. UTC | #1
On Tuesday, June 7, 2016 4:29:21 PM CEST Baolin Wang wrote:
> Now on ARM64 platform, it will set 'dummy_dma_ops' for device dma_ops if
> it did not call 'arch_setup_dma_ops' at device creation time by issuing
> platform_device_alloc() function, that will cause failure when setting
> the dma mask for device.
> 
> Hence We need to hook the archdata to setup proper dma_ops for these devices.
> 
> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
> ---
>  arch/arm64/mm/dma-mapping.c |   21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
> 
> diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
> index c566ec8..04e057b 100644
> --- a/arch/arm64/mm/dma-mapping.c
> +++ b/arch/arm64/mm/dma-mapping.c
> @@ -26,6 +26,7 @@
>  #include <linux/dma-contiguous.h>
>  #include <linux/vmalloc.h>
>  #include <linux/swiotlb.h>
> +#include <linux/platform_device.h>
>  
>  #include <asm/cacheflush.h>
>  
> @@ -961,3 +962,23 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
>  	dev->archdata.dma_coherent = coherent;
>  	__iommu_setup_dma_ops(dev, dma_base, size, iommu);
>  }
> +
> +void arch_setup_pdev_archdata(struct platform_device *pdev)
> +{
> +	if (!pdev->dev.archdata.dma_ops)
> +		pdev->dev.archdata.dma_ops = &swiotlb_dma_ops;

You need to check the DT here to see if these are the right ops,
or if you have to go through an IOMMU. Also, you have to set up the
other fields that are controlled by arch_setup_dma_ops: whether
it's coherent and what the offset is.

> +	/*
> +	 * Set default coherent_dma_mask to 32 bit. Drivers are expected to
> +	 * setup the correct supported mask.
> +	 */
> +	if (!pdev->dev.coherent_dma_mask)
> +		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
> +
> +	/*
> +	 * Set it to coherent_dma_mask by default if the architecture
> +	 * code has not set it.
> +	 */
> +	if (!pdev->dev.dma_mask)
> +		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
> +}

We still have an open bug about the dma_set_mask() function on ARM64:
we have to check the dma-ranges property to ensure that no device can
set a mask wider than what its parent bus can support.

What is your plan for this in case of these devices?

	Arnd
Robin Murphy June 7, 2016, 9:15 a.m. UTC | #2
On 07/06/16 09:29, Baolin Wang wrote:
> Now on ARM64 platform, it will set 'dummy_dma_ops' for device dma_ops if
> it did not call 'arch_setup_dma_ops' at device creation time by issuing
> platform_device_alloc() function, that will cause failure when setting
> the dma mask for device.

Yes, that's rather the whole point. DMA-capable devices are real 
hardware, therefore don't spring out of thin air without being described 
in DT or ACPI.

Please elaborate on the situation that you're attempting to address here 
(please don't let it be the ongoing Designware USB catastrophe ;))

Robin.

> Hence We need to hook the archdata to setup proper dma_ops for these devices.
>
> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
> ---
>   arch/arm64/mm/dma-mapping.c |   21 +++++++++++++++++++++
>   1 file changed, 21 insertions(+)
>
> diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
> index c566ec8..04e057b 100644
> --- a/arch/arm64/mm/dma-mapping.c
> +++ b/arch/arm64/mm/dma-mapping.c
> @@ -26,6 +26,7 @@
>   #include <linux/dma-contiguous.h>
>   #include <linux/vmalloc.h>
>   #include <linux/swiotlb.h>
> +#include <linux/platform_device.h>
>
>   #include <asm/cacheflush.h>
>
> @@ -961,3 +962,23 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
>   	dev->archdata.dma_coherent = coherent;
>   	__iommu_setup_dma_ops(dev, dma_base, size, iommu);
>   }
> +
> +void arch_setup_pdev_archdata(struct platform_device *pdev)
> +{
> +	if (!pdev->dev.archdata.dma_ops)
> +		pdev->dev.archdata.dma_ops = &swiotlb_dma_ops;
> +
> +	/*
> +	 * Set default coherent_dma_mask to 32 bit. Drivers are expected to
> +	 * setup the correct supported mask.
> +	 */
> +	if (!pdev->dev.coherent_dma_mask)
> +		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
> +
> +	/*
> +	 * Set it to coherent_dma_mask by default if the architecture
> +	 * code has not set it.
> +	 */
> +	if (!pdev->dev.dma_mask)
> +		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
> +}
>
(Exiting) Baolin Wang June 7, 2016, 9:22 a.m. UTC | #3
On 7 June 2016 at 17:15, Robin Murphy <robin.murphy@arm.com> wrote:
> On 07/06/16 09:29, Baolin Wang wrote:
>>
>> Now on ARM64 platform, it will set 'dummy_dma_ops' for device dma_ops if
>> it did not call 'arch_setup_dma_ops' at device creation time by issuing
>> platform_device_alloc() function, that will cause failure when setting
>> the dma mask for device.
>
>
> Yes, that's rather the whole point. DMA-capable devices are real hardware,
> therefore don't spring out of thin air without being described in DT or
> ACPI.

OK.

>
> Please elaborate on the situation that you're attempting to address here
> (please don't let it be the ongoing Designware USB catastrophe ;))

Yes, like you mentioned, we met problems at DesignWare USB3 controller
host glue, do you have any better solutions to solve this problem?
Thanks.

>
> Robin.
>
>
>> Hence We need to hook the archdata to setup proper dma_ops for these
>> devices.
>>
>> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
>> ---
>>   arch/arm64/mm/dma-mapping.c |   21 +++++++++++++++++++++
>>   1 file changed, 21 insertions(+)
>>
>> diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
>> index c566ec8..04e057b 100644
>> --- a/arch/arm64/mm/dma-mapping.c
>> +++ b/arch/arm64/mm/dma-mapping.c
>> @@ -26,6 +26,7 @@
>>   #include <linux/dma-contiguous.h>
>>   #include <linux/vmalloc.h>
>>   #include <linux/swiotlb.h>
>> +#include <linux/platform_device.h>
>>
>>   #include <asm/cacheflush.h>
>>
>> @@ -961,3 +962,23 @@ void arch_setup_dma_ops(struct device *dev, u64
>> dma_base, u64 size,
>>         dev->archdata.dma_coherent = coherent;
>>         __iommu_setup_dma_ops(dev, dma_base, size, iommu);
>>   }
>> +
>> +void arch_setup_pdev_archdata(struct platform_device *pdev)
>> +{
>> +       if (!pdev->dev.archdata.dma_ops)
>> +               pdev->dev.archdata.dma_ops = &swiotlb_dma_ops;
>> +
>> +       /*
>> +        * Set default coherent_dma_mask to 32 bit. Drivers are expected
>> to
>> +        * setup the correct supported mask.
>> +        */
>> +       if (!pdev->dev.coherent_dma_mask)
>> +               pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
>> +
>> +       /*
>> +        * Set it to coherent_dma_mask by default if the architecture
>> +        * code has not set it.
>> +        */
>> +       if (!pdev->dev.dma_mask)
>> +               pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
>> +}
>>
>
(Exiting) Baolin Wang June 13, 2016, 8:26 a.m. UTC | #4
On 7 June 2016 at 16:43, Arnd Bergmann <arnd@arndb.de> wrote:
> On Tuesday, June 7, 2016 4:29:21 PM CEST Baolin Wang wrote:
>> Now on ARM64 platform, it will set 'dummy_dma_ops' for device dma_ops if
>> it did not call 'arch_setup_dma_ops' at device creation time by issuing
>> platform_device_alloc() function, that will cause failure when setting
>> the dma mask for device.
>>
>> Hence We need to hook the archdata to setup proper dma_ops for these devices.
>>
>> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
>> ---
>>  arch/arm64/mm/dma-mapping.c |   21 +++++++++++++++++++++
>>  1 file changed, 21 insertions(+)
>>
>> diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
>> index c566ec8..04e057b 100644
>> --- a/arch/arm64/mm/dma-mapping.c
>> +++ b/arch/arm64/mm/dma-mapping.c
>> @@ -26,6 +26,7 @@
>>  #include <linux/dma-contiguous.h>
>>  #include <linux/vmalloc.h>
>>  #include <linux/swiotlb.h>
>> +#include <linux/platform_device.h>
>>
>>  #include <asm/cacheflush.h>
>>
>> @@ -961,3 +962,23 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
>>       dev->archdata.dma_coherent = coherent;
>>       __iommu_setup_dma_ops(dev, dma_base, size, iommu);
>>  }
>> +
>> +void arch_setup_pdev_archdata(struct platform_device *pdev)
>> +{
>> +     if (!pdev->dev.archdata.dma_ops)
>> +             pdev->dev.archdata.dma_ops = &swiotlb_dma_ops;
>
> You need to check the DT here to see if these are the right ops,
> or if you have to go through an IOMMU. Also, you have to set up the
> other fields that are controlled by arch_setup_dma_ops: whether
> it's coherent and what the offset is.

That's right. This is just set the platform device arch data, after
that the dma ops will be re-setup by issuing arch_setup_dma_ops(). But
some platform devices created by platform_device_alloc() will not
issue the arch_setup_dma_ops() function to setup the dma ops. So I
want to set the default dma ops by arch_setup_pdev_archdata(), but
that is not reasonable according to Robin's explanation.

>
>> +     /*
>> +      * Set default coherent_dma_mask to 32 bit. Drivers are expected to
>> +      * setup the correct supported mask.
>> +      */
>> +     if (!pdev->dev.coherent_dma_mask)
>> +             pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
>> +
>> +     /*
>> +      * Set it to coherent_dma_mask by default if the architecture
>> +      * code has not set it.
>> +      */
>> +     if (!pdev->dev.dma_mask)
>> +             pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
>> +}
>
> We still have an open bug about the dma_set_mask() function on ARM64:
> we have to check the dma-ranges property to ensure that no device can
> set a mask wider than what its parent bus can support.
>
> What is your plan for this in case of these devices?

I think these are just default setup for dma mask. I suppose the
checking you mentioned should be added in of_dma_configure()?
Catalin Marinas June 14, 2016, 2:43 p.m. UTC | #5
On Tue, Jun 07, 2016 at 05:22:25PM +0800, Baolin Wang wrote:
> On 7 June 2016 at 17:15, Robin Murphy <robin.murphy@arm.com> wrote:
> > Please elaborate on the situation that you're attempting to address here
> > (please don't let it be the ongoing Designware USB catastrophe ;))
> 
> Yes, like you mentioned, we met problems at DesignWare USB3 controller
> host glue, do you have any better solutions to solve this problem?

There has been a recent thread on this topic:

http://thread.gmane.org/gmane.linux.usb.general/140374

And a subsequent patch with another long discussion:

http://thread.gmane.org/gmane.linux.kernel/2207020

Please have a look, maybe you can make more sense of it ;). AFAICT,
there was no clear conclusion reached.
(Exiting) Baolin Wang June 15, 2016, 2:13 a.m. UTC | #6
On 14 June 2016 at 22:43, Catalin Marinas <catalin.marinas@arm.com> wrote:
> On Tue, Jun 07, 2016 at 05:22:25PM +0800, Baolin Wang wrote:
>> On 7 June 2016 at 17:15, Robin Murphy <robin.murphy@arm.com> wrote:
>> > Please elaborate on the situation that you're attempting to address here
>> > (please don't let it be the ongoing Designware USB catastrophe ;))
>>
>> Yes, like you mentioned, we met problems at DesignWare USB3 controller
>> host glue, do you have any better solutions to solve this problem?
>
> There has been a recent thread on this topic:
>
> http://thread.gmane.org/gmane.linux.usb.general/140374
>
> And a subsequent patch with another long discussion:
>
> http://thread.gmane.org/gmane.linux.kernel/2207020
>
> Please have a look, maybe you can make more sense of it ;). AFAICT,
> there was no clear conclusion reached.

OK. Thanks for your updating.

>
> --
> Catalin
diff mbox

Patch

diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
index c566ec8..04e057b 100644
--- a/arch/arm64/mm/dma-mapping.c
+++ b/arch/arm64/mm/dma-mapping.c
@@ -26,6 +26,7 @@ 
 #include <linux/dma-contiguous.h>
 #include <linux/vmalloc.h>
 #include <linux/swiotlb.h>
+#include <linux/platform_device.h>
 
 #include <asm/cacheflush.h>
 
@@ -961,3 +962,23 @@  void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
 	dev->archdata.dma_coherent = coherent;
 	__iommu_setup_dma_ops(dev, dma_base, size, iommu);
 }
+
+void arch_setup_pdev_archdata(struct platform_device *pdev)
+{
+	if (!pdev->dev.archdata.dma_ops)
+		pdev->dev.archdata.dma_ops = &swiotlb_dma_ops;
+
+	/*
+	 * Set default coherent_dma_mask to 32 bit. Drivers are expected to
+	 * setup the correct supported mask.
+	 */
+	if (!pdev->dev.coherent_dma_mask)
+		pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+
+	/*
+	 * Set it to coherent_dma_mask by default if the architecture
+	 * code has not set it.
+	 */
+	if (!pdev->dev.dma_mask)
+		pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+}