@@ -25,35 +25,28 @@
/* Register to enable PWM and IR */
#define MTK_CONFIG_HIGH_REG 0x0c
-/* Enable IR pulse width detection */
+
+/* Bit to enable IR pulse width detection */
#define MTK_PWM_EN BIT(13)
-/* Enable IR hardware function */
-#define MTK_IR_EN BIT(0)
-/* Register to setting sample period */
-#define MTK_CONFIG_LOW_REG 0x10
-/* Field to set sample period */
-#define CHK_PERIOD DIV_ROUND_CLOSEST(MTK_IR_SAMPLE, \
- MTK_IR_CLK_PERIOD)
-#define MTK_CHK_PERIOD (((CHK_PERIOD) << 8) & (GENMASK(20, 8)))
-#define MTK_CHK_PERIOD_MASK (GENMASK(20, 8))
+/*
+ * Register to setting ok count whose unit based on hardware sampling period
+ * indicating IR receiving completion and then making IRQ fires
+ */
+#define MTK_OK_COUNT(x) (((x) & GENMASK(23, 16)) << 16)
+
+/* Bit to enable IR hardware function */
+#define MTK_IR_EN BIT(0)
-/* Register to clear state of state machine */
-#define MTK_IRCLR_REG 0x20
/* Bit to restart IR receiving */
#define MTK_IRCLR BIT(0)
-/* Register containing pulse width data */
-#define MTK_CHKDATA_REG(i) (0x88 + 4 * (i))
+/* Fields containing pulse width data */
#define MTK_WIDTH_MASK (GENMASK(7, 0))
-/* Register to enable IR interrupt */
-#define MTK_IRINT_EN_REG 0xcc
/* Bit to enable interrupt */
#define MTK_IRINT_EN BIT(0)
-/* Register to ack IR interrupt */
-#define MTK_IRINT_CLR_REG 0xd0
/* Bit to clear interrupt status */
#define MTK_IRINT_CLR BIT(0)
@@ -63,24 +56,73 @@
#define MTK_IR_END(v, p) ((v) == MTK_MAX_SAMPLES && (p) == 0)
/* Number of registers to record the pulse width */
#define MTK_CHKDATA_SZ 17
-/* Source clock frequency */
-#define MTK_IR_BASE_CLK 273000000
-/* Frequency after IR internal divider */
-#define MTK_IR_CLK_FREQ (MTK_IR_BASE_CLK / 4)
-/* Period for MTK_IR_CLK in ns*/
-#define MTK_IR_CLK_PERIOD DIV_ROUND_CLOSEST(1000000000ul, \
- MTK_IR_CLK_FREQ)
/* Sample period in ns */
-#define MTK_IR_SAMPLE (MTK_IR_CLK_PERIOD * 0xc00)
+#define MTK_IR_SAMPLE 46000
+
+enum mtk_fields {
+ /* Register to setting software sampling period */
+ MTK_CHK_PERIOD,
+ /* Register to setting hardware sampling period */
+ MTK_HW_PERIOD,
+};
+
+enum mtk_regs {
+ /* Register to clear state of state machine */
+ MTK_IRCLR_REG,
+ /* Register containing pulse width data */
+ MTK_CHKDATA_REG,
+ /* Register to enable IR interrupt */
+ MTK_IRINT_EN_REG,
+ /* Register to ack IR interrupt */
+ MTK_IRINT_CLR_REG
+};
+
+static const u32 mt7623_regs[] = {
+ [MTK_IRCLR_REG] = 0x20,
+ [MTK_CHKDATA_REG] = 0x88,
+ [MTK_IRINT_EN_REG] = 0xcc,
+ [MTK_IRINT_CLR_REG] = 0xd0,
+};
+
+struct mtk_field_type {
+ u32 reg;
+ u8 offset;
+ u32 mask;
+};
+
+/*
+ * struct mtk_ir_data - This is the structure holding all differences among
+ various hardwares
+ * @regs: The pointer to the array holding registers offset
+ * @fields: The pointer to the array holding fields location
+ * @div: The internal divisor for the based reference clock
+ * @ok_count: The count indicating the completion of IR data
+ * receiving when count is reached
+ * @hw_period: The value indicating the hardware sampling period
+ */
+struct mtk_ir_data {
+ const u32 *regs;
+ const struct mtk_field_type *fields;
+ u8 div;
+ u8 ok_count;
+ u32 hw_period;
+};
+
+static const struct mtk_field_type mt7623_fields[] = {
+ [MTK_CHK_PERIOD] = {0x10, 8, GENMASK(20, 8)},
+ [MTK_HW_PERIOD] = {0x10, 0, GENMASK(7, 0)},
+};
/*
* struct mtk_ir - This is the main datasructure for holding the state
* of the driver
* @dev: The device pointer
* @rc: The rc instrance
- * @irq: The IRQ that we are using
* @base: The mapped register i/o base
- * @clk: The clock that we are using
+ * @irq: The IRQ that we are using
+ * @clk: The clock that IR internal is using
+ * @bus: The clock that software decoder is using
+ * @data: Holding specific data for vaious platform
*/
struct mtk_ir {
struct device *dev;
@@ -88,8 +130,36 @@ struct mtk_ir {
void __iomem *base;
int irq;
struct clk *clk;
+ struct clk *bus;
+ const struct mtk_ir_data *data;
};
+static inline u32 mtk_chkdata_reg(struct mtk_ir *ir, u32 i)
+{
+ return ir->data->regs[MTK_CHKDATA_REG] + 4 * i;
+}
+
+static inline u32 mtk_chk_period(struct mtk_ir *ir)
+{
+ u32 val;
+
+ /* Period of raw software sampling in ns */
+ val = DIV_ROUND_CLOSEST(1000000000ul,
+ clk_get_rate(ir->bus) / ir->data->div);
+
+ /*
+ * Period for software decoder used in the
+ * unit of raw software sampling
+ */
+ val = DIV_ROUND_CLOSEST(MTK_IR_SAMPLE, val);
+
+ dev_dbg(ir->dev, "@pwm clk = \t%lu\n",
+ clk_get_rate(ir->bus) / ir->data->div);
+ dev_dbg(ir->dev, "@chkperiod = %08x\n", val);
+
+ return val;
+}
+
static void mtk_w32_mask(struct mtk_ir *ir, u32 val, u32 mask, unsigned int reg)
{
u32 tmp;
@@ -113,16 +183,16 @@ static inline void mtk_irq_disable(struct mtk_ir *ir, u32 mask)
{
u32 val;
- val = mtk_r32(ir, MTK_IRINT_EN_REG);
- mtk_w32(ir, val & ~mask, MTK_IRINT_EN_REG);
+ val = mtk_r32(ir, ir->data->regs[MTK_IRINT_EN_REG]);
+ mtk_w32(ir, val & ~mask, ir->data->regs[MTK_IRINT_EN_REG]);
}
static inline void mtk_irq_enable(struct mtk_ir *ir, u32 mask)
{
u32 val;
- val = mtk_r32(ir, MTK_IRINT_EN_REG);
- mtk_w32(ir, val | mask, MTK_IRINT_EN_REG);
+ val = mtk_r32(ir, ir->data->regs[MTK_IRINT_EN_REG]);
+ mtk_w32(ir, val | mask, ir->data->regs[MTK_IRINT_EN_REG]);
}
static irqreturn_t mtk_ir_irq(int irqno, void *dev_id)
@@ -140,7 +210,7 @@ static irqreturn_t mtk_ir_irq(int irqno, void *dev_id)
* every decoder to reset themselves through long enough
* trailing spaces and 2) the IRQ handler guarantees that
* start of IR message is always contained in and starting
- * from register MTK_CHKDATA_REG(0).
+ * from register mtk_chkdata_reg(ir, i).
*/
ir_raw_event_reset(ir->rc);
@@ -149,7 +219,7 @@ static irqreturn_t mtk_ir_irq(int irqno, void *dev_id)
/* Handle all pulse and space IR controller captures */
for (i = 0 ; i < MTK_CHKDATA_SZ ; i++) {
- val = mtk_r32(ir, MTK_CHKDATA_REG(i));
+ val = mtk_r32(ir, mtk_chkdata_reg(ir, i));
dev_dbg(ir->dev, "@reg%d=0x%08x\n", i, val);
for (j = 0 ; j < 4 ; j++) {
@@ -181,18 +251,35 @@ static irqreturn_t mtk_ir_irq(int irqno, void *dev_id)
* Restart controller for the next receive that would
* clear up all CHKDATA registers
*/
- mtk_w32_mask(ir, 0x1, MTK_IRCLR, MTK_IRCLR_REG);
+ mtk_w32_mask(ir, 0x1, MTK_IRCLR, ir->data->regs[MTK_IRCLR_REG]);
/* Clear interrupt status */
- mtk_w32_mask(ir, 0x1, MTK_IRINT_CLR, MTK_IRINT_CLR_REG);
+ mtk_w32_mask(ir, 0x1, MTK_IRINT_CLR,
+ ir->data->regs[MTK_IRINT_CLR_REG]);
return IRQ_HANDLED;
}
+static const struct mtk_ir_data mt7623_data = {
+ .regs = mt7623_regs,
+ .fields = mt7623_fields,
+ .ok_count = 0xf,
+ .hw_period = 0xff,
+ .div = 4,
+};
+
+static const struct of_device_id mtk_ir_match[] = {
+ { .compatible = "mediatek,mt7623-cir", .data = &mt7623_data},
+ {},
+};
+MODULE_DEVICE_TABLE(of, mtk_ir_match);
+
static int mtk_ir_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *dn = dev->of_node;
+ const struct of_device_id *of_id =
+ of_match_device(mtk_ir_match, &pdev->dev);
struct resource *res;
struct mtk_ir *ir;
u32 val;
@@ -204,9 +291,7 @@ static int mtk_ir_probe(struct platform_device *pdev)
return -ENOMEM;
ir->dev = dev;
-
- if (!of_device_is_compatible(dn, "mediatek,mt7623-cir"))
- return -ENODEV;
+ ir->data = of_id->data;
ir->clk = devm_clk_get(dev, "clk");
if (IS_ERR(ir->clk)) {
@@ -214,6 +299,15 @@ static int mtk_ir_probe(struct platform_device *pdev)
return PTR_ERR(ir->clk);
}
+ ir->bus = devm_clk_get(dev, "bus");
+ if (IS_ERR(ir->bus)) {
+ /*
+ * For compatibility with older device trees try unnamed
+ * ir->bus uses the same clock as ir->clock.
+ */
+ ir->bus = ir->clk;
+ }
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
ir->base = devm_ioremap_resource(dev, res);
if (IS_ERR(ir->base)) {
@@ -256,40 +350,60 @@ static int mtk_ir_probe(struct platform_device *pdev)
return -ENODEV;
}
- /*
- * Enable interrupt after proper hardware
- * setup and IRQ handler registration
- */
if (clk_prepare_enable(ir->clk)) {
dev_err(dev, "try to enable ir_clk failed\n");
+ return -EINVAL;
+ }
+
+ if (clk_prepare_enable(ir->bus)) {
+ dev_err(dev, "try to enable ir_clk failed\n");
ret = -EINVAL;
goto exit_clkdisable_clk;
}
+ /*
+ * Enable interrupt after proper hardware
+ * setup and IRQ handler registration
+ */
mtk_irq_disable(ir, MTK_IRINT_EN);
ret = devm_request_irq(dev, ir->irq, mtk_ir_irq, 0, MTK_IR_DEV, ir);
if (ret) {
dev_err(dev, "failed request irq\n");
- goto exit_clkdisable_clk;
+ goto exit_clkdisable_bus;
}
+ /*
+ * Setup software sample period as the reference of software decoder
+ */
+ val = (mtk_chk_period(ir) << ir->data->fields[MTK_CHK_PERIOD].offset) &
+ ir->data->fields[MTK_CHK_PERIOD].mask;
+ mtk_w32_mask(ir, val, ir->data->fields[MTK_CHK_PERIOD].mask,
+ ir->data->fields[MTK_CHK_PERIOD].reg);
+
+ /*
+ * Setup hardware sampling period used to setup the proper timeout for
+ * indicating end of IR receiving completion
+ */
+ val = (ir->data->hw_period << ir->data->fields[MTK_HW_PERIOD].offset) &
+ ir->data->fields[MTK_HW_PERIOD].mask;
+ mtk_w32_mask(ir, val, ir->data->fields[MTK_HW_PERIOD].mask,
+ ir->data->fields[MTK_HW_PERIOD].reg);
+
/* Enable IR and PWM */
val = mtk_r32(ir, MTK_CONFIG_HIGH_REG);
- val |= MTK_PWM_EN | MTK_IR_EN;
+ val |= MTK_OK_COUNT(ir->data->ok_count) | MTK_PWM_EN | MTK_IR_EN;
mtk_w32(ir, val, MTK_CONFIG_HIGH_REG);
- /* Setting sample period */
- mtk_w32_mask(ir, MTK_CHK_PERIOD, MTK_CHK_PERIOD_MASK,
- MTK_CONFIG_LOW_REG);
-
mtk_irq_enable(ir, MTK_IRINT_EN);
- dev_info(dev, "Initialized MT7623 IR driver, sample period = %luus\n",
+ dev_info(dev, "Initialized MT7623 IR driver, sample period = %dus\n",
DIV_ROUND_CLOSEST(MTK_IR_SAMPLE, 1000));
return 0;
+exit_clkdisable_bus:
+ clk_disable_unprepare(ir->bus);
exit_clkdisable_clk:
clk_disable_unprepare(ir->clk);
@@ -308,17 +422,12 @@ static int mtk_ir_remove(struct platform_device *pdev)
mtk_irq_disable(ir, MTK_IRINT_EN);
synchronize_irq(ir->irq);
+ clk_disable_unprepare(ir->bus);
clk_disable_unprepare(ir->clk);
return 0;
}
-static const struct of_device_id mtk_ir_match[] = {
- { .compatible = "mediatek,mt7623-cir" },
- {},
-};
-MODULE_DEVICE_TABLE(of, mtk_ir_match);
-
static struct platform_driver mtk_ir_driver = {
.probe = mtk_ir_probe,
.remove = mtk_ir_remove,