@@ -179,18 +179,21 @@
compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
reg = <0x1e6e2000 0x1a8>;
#address-cells = <1>;
- #size-cells = <0>;
+ #size-cells = <1>;
+ ranges = <0 0x1e6e2000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
- pinctrl: pinctrl {
- compatible = "aspeed,ast2400-pinctrl";
- };
-
- p2a: p2a-control {
+ p2a: p2a-control@2c {
+ reg = <0x2c 0x4>;
compatible = "aspeed,ast2400-p2a-ctrl";
status = "disabled";
};
+
+ pinctrl: pinctrl@80 {
+ reg = <0x80 0x18>, <0xa0 0x10>;
+ compatible = "aspeed,ast2400-pinctrl";
+ };
};
rng: hwrng@1e6e2078 {
@@ -217,19 +217,22 @@
compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
reg = <0x1e6e2000 0x1a8>;
#address-cells = <1>;
- #size-cells = <0>;
+ #size-cells = <1>;
+ ranges = <0 0x1e6e2000 0x1000>;
#clock-cells = <1>;
#reset-cells = <1>;
- pinctrl: pinctrl {
- compatible = "aspeed,ast2500-pinctrl";
- aspeed,external-nodes = <&gfx>, <&lhc>;
- };
-
- p2a: p2a-control {
+ p2a: p2a-control@2c {
compatible = "aspeed,ast2500-p2a-ctrl";
+ reg = <0x2c 0x4>;
status = "disabled";
};
+
+ pinctrl: pinctrl@80 {
+ compatible = "aspeed,ast2500-pinctrl";
+ reg = <0x80 0x18>, <0xa0 0x10>;
+ aspeed,external-nodes = <&gfx>, <&lhc>;
+ };
};
rng: hwrng@1e6e2078 {
Fixes the following warnings: arch/arm/boot/dts/aspeed-g5.dtsi:209.28-226.6: Warning (avoid_unnecessary_addr_size): /ahb/apb/syscon@1e6e2000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property arch/arm/boot/dts/aspeed-g4.dtsi:156.28-172.6: Warning (avoid_unnecessary_addr_size): /ahb/apb/syscon@1e6e2000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> --- arch/arm/boot/dts/aspeed-g4.dtsi | 15 +++++++++------ arch/arm/boot/dts/aspeed-g5.dtsi | 17 ++++++++++------- 2 files changed, 19 insertions(+), 13 deletions(-)