@@ -59,14 +59,14 @@ Examples:
mac_control = <0x20>;
slaves = <2>;
cpsw_emac0: slave@0 {
- slave_reg_ofs = <0x208>;
+ slave_reg_ofs = <0x200>;
sliver_reg_ofs = <0xd80>;
phy_id = "davinci_mdio.16:00";
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
};
cpsw_emac1: slave@1 {
- slave_reg_ofs = <0x308>;
+ slave_reg_ofs = <0x300>;
sliver_reg_ofs = <0xdc0>;
phy_id = "davinci_mdio.16:01";
/* Filled in by U-Boot */
@@ -93,14 +93,14 @@ Examples:
mac_control = <0x20>;
slaves = <2>;
cpsw_emac0: slave@0 {
- slave_reg_ofs = <0x208>;
+ slave_reg_ofs = <0x200>;
sliver_reg_ofs = <0xd80>;
phy_id = "davinci_mdio.16:00";
/* Filled in by U-Boot */
mac-address = [ 00 00 00 00 00 00 ];
};
cpsw_emac1: slave@1 {
- slave_reg_ofs = <0x308>;
+ slave_reg_ofs = <0x300>;
sliver_reg_ofs = <0xdc0>;
phy_id = "davinci_mdio.16:01";
/* Filled in by U-Boot */
@@ -157,9 +157,11 @@ struct cpsw_ss_regs {
};
struct cpsw_slave_regs {
+ u32 control;
+ u32 res1;
u32 max_blks;
u32 blk_cnt;
- u32 flow_thresh;
+ u32 tx_in_ctl;
u32 port_vlan;
u32 tx_pri_map;
u32 ts_ctl;
@@ -167,6 +169,16 @@ struct cpsw_slave_regs {
u32 ts_vlan;
u32 sa_lo;
u32 sa_hi;
+ u32 send_percent;
+ u32 res2;
+ u32 rx_dscp_pri_map0;
+ u32 rx_dscp_pri_map1;
+ u32 rx_dscp_pri_map2;
+ u32 rx_dscp_pri_map3;
+ u32 rx_dscp_pri_map4;
+ u32 rx_dscp_pri_map5;
+ u32 rx_dscp_pri_map6;
+ u32 rx_dscp_pri_map7;
};
struct cpsw_host_regs {
This commit corrects and expands the slave port register bank according to TI's Technical Reference Manual. Signed-off-by: Richard Cochran <richardcochran@gmail.com> --- Documentation/devicetree/bindings/net/cpsw.txt | 8 ++++---- drivers/net/ethernet/ti/cpsw.c | 14 +++++++++++++- 2 files changed, 17 insertions(+), 5 deletions(-)