diff mbox

[6/8] irqchip: devicetree: document Conexant Digicolor irq binding

Message ID d62c1799bf2870978e86688d7f95eba91c3885e5.1419318109.git.baruch@tkos.co.il (mailing list archive)
State New, archived
Headers show

Commit Message

Baruch Siach Dec. 23, 2014, 7:58 a.m. UTC 
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
---
 .../bindings/interrupt-controller/digicolor-ic.txt   | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/digicolor-ic.txt
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/interrupt-controller/digicolor-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/digicolor-ic.txt
new file mode 100644
index 000000000000..fdf9a4c59bf3
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/digicolor-ic.txt
@@ -0,0 +1,20 @@ 
+Conexant Digicolor Interrupt Controller
+
+Required properties:
+
+- compatible : should be "cnxt,cx92755-ic"
+- reg : Specifies base physical address and size of the MISC area, that is
+  where the interrupt controller registers are located
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 1.
+
+Example:
+
+	intc: intc@f0000000 {
+		compatible = "cnxt,cx92755-ic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0xf0000000 0x1000>;
+	};
+