diff mbox series

[1/2] dt-bindings: phy: Add documentation for mixel dphy

Message ID e2449d7bac3d9e01cd6a51eb85460dce729bf77e.1548410989.git.agx@sigxcpu.org
State New, archived
Headers show
Series RFC: Mixel DPHY support for i.MX8 | expand

Commit Message

Guido Günther Jan. 25, 2019, 10:14 a.m. UTC
Signed-off-by: Guido Günther <agx@sigxcpu.org>
---
 .../bindings/phy/mixel,mipi-dsi-phy.txt       | 29 +++++++++++++++++++
 1 file changed, 29 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt
new file mode 100644
index 000000000000..10323ae8ee37
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt
@@ -0,0 +1,29 @@ 
+Mixel DSI PHY for i.MX8
+
+The Mixel MIPI-DSI PHY IP block is e.g. found on MX8 platforms (along
+the MIPI-DSI IP from Northwest Logic). It represents the physical
+layer for the electrical signals for DSI.
+
+Required properties:
+- compatible: Must be:
+  - "mixel,imx8mq-mipi-dphy"
+- clocks: Must contain an entry for each entry in clock-names.
+- clock-names: Must contain the following entries:
+  - "phy_ref": phandle and specifier referring to the DPHY ref clock
+- reg: the register range of the PHY controller
+- #phy-cells: number of cells in PHY, as defined in
+  Documentation/devicetree/bindings/phy/phy-bindings.txt
+  this must be <0>
+
+Optional properties:
+- power-domains: phandle to power domain
+
+Example:
+	mipi_dphy: mipi_dphy@30A0030 {
+		compatible = "mixel,imx8mq-mipi-dphy";
+		clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
+		clock-names = "phy_ref";
+		reg = <0x30A00300 0x100>;
+		power-domains = <&pd_mipi0>;
+		#phy-cells = <0>;
+        };