[1/2] usb: chipidea: zynq: Add device tree binding information

Commit Message

Punnaiah Choudary Kalluri June 27, 2014, 3:40 a.m. UTC

Document device tree binding information as required by
the ZYNQ USB controller.

Signed-off-by: Punnaiah Choudary Kalluri <[e-mail]>
---
 .../devicetree/bindings/usb/ci-hdrc-zynq.txt       |   23 ++++++++++++++++++++
 1 files changed, 23 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-zynq.txt

Patch

diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-zynq.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-zynq.txt
new file mode 100644
index 0000000..54bb3b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ci-hdrc-zynq.txt
@@ -0,0 +1,23 @@ 
+Xilinx Zynq usb controller based on synopsys usb IP(v2.20a)
+
+Required properties:
+- compatible:   should contain "xlnx,zynq-usb-2.20a"
+- clocks:       clock provider specifier
+- reg:          offset and length of the register set in the memory map
+- interrupt-parent: the phandle for the interrupt controller that services
+                    interrupts for this device.
+- interrupts:   interrupt-specifier for the controller interrupt.
+- phy_type:     should be "ulpi"
+- dr_mode:      should be "peripheral" or "host"
+
+Examples:
+
+	usb@e0002000 {
+		clocks = <&clkc 28>;
+		compatible = "xlnx,zynq-usb-2.20a";
+		dr_mode = "host";
+		interrupt-parent = <&ps7_scugic_0>;
+		interrupts = <0 21 4>;
+		phy_type = "ulpi";
+		reg = <0xe0002000 0x1000>;
+	} ;