| Message ID | e789197b91251657a45c7a9c1c59c35d163ef85a.1504037038.git.mirq-linux@rere.qmqm.pl (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi, I have that in my tree which seems similar enough: https://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux.git/commit/?h=at91-dt&id=1a9f9af07e806dd4d5df109c61ac0d5c74fe9b32 On 29/08/2017 at 22:08:53 +0200, Michał Mirosław wrote: > Add AC97 controller node as present on AT91SAM9G45-EKES board. > > Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> > --- > arch/arm/boot/dts/at91sam9g45.dtsi | 21 +++++++++++++++++++++ > arch/arm/boot/dts/at91sam9m10g45ek.dts | 4 ++++ > 2 files changed, 25 insertions(+) > > diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi > index e567d5fd3f9d..0e69a97695cd 100644 > --- a/arch/arm/boot/dts/at91sam9g45.dtsi > +++ b/arch/arm/boot/dts/at91sam9g45.dtsi > @@ -846,6 +846,16 @@ > }; > }; > > + ac97 { > + pinctrl_ac97: ac97-0 { > + atmel,pins = > + <AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD8 periph A AC97FS pin */ > + AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD9 periph A AC97CK pin */ > + AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD7 periph A AC97TX pin */ > + AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD6 periph A AC97RX pin */ > + }; > + }; > + > pioA: gpio@fffff200 { > compatible = "atmel,at91rm9200-gpio"; > reg = <0xfffff200 0x200>; > @@ -965,6 +975,17 @@ > status = "disabled"; > }; > > + ac97: sound@fffac000 { > + compatible = "atmel,at91sam9263-ac97c"; > + reg = <0xfffac000 0x4000>; > + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 5>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_ac97>; > + clocks = <&ac97_clk>; > + clock-names = "ac97_clk"; > + status = "disabled"; > + }; > + > macb0: ethernet@fffbc000 { > compatible = "cdns,at91sam9260-macb", "cdns,macb"; > reg = <0xfffbc000 0x100>; > diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts > index 2400c99134f7..9cf1f5163fbd 100644 > --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts > +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts > @@ -47,6 +47,10 @@ > status = "okay"; > }; > > + ac97: sound@fffac000 { > + status = "okay"; > + }; > + > macb0: ethernet@fffbc000 { > phy-mode = "rmii"; > status = "okay"; > -- > 2.11.0 >
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index e567d5fd3f9d..0e69a97695cd 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -846,6 +846,16 @@ }; }; + ac97 { + pinctrl_ac97: ac97-0 { + atmel,pins = + <AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD8 periph A AC97FS pin */ + AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD9 periph A AC97CK pin */ + AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PD7 periph A AC97TX pin */ + AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PD6 periph A AC97RX pin */ + }; + }; + pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; @@ -965,6 +975,17 @@ status = "disabled"; }; + ac97: sound@fffac000 { + compatible = "atmel,at91sam9263-ac97c"; + reg = <0xfffac000 0x4000>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ac97>; + clocks = <&ac97_clk>; + clock-names = "ac97_clk"; + status = "disabled"; + }; + macb0: ethernet@fffbc000 { compatible = "cdns,at91sam9260-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 2400c99134f7..9cf1f5163fbd 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -47,6 +47,10 @@ status = "okay"; }; + ac97: sound@fffac000 { + status = "okay"; + }; + macb0: ethernet@fffbc000 { phy-mode = "rmii"; status = "okay";
Add AC97 controller node as present on AT91SAM9G45-EKES board. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> --- arch/arm/boot/dts/at91sam9g45.dtsi | 21 +++++++++++++++++++++ arch/arm/boot/dts/at91sam9m10g45ek.dts | 4 ++++ 2 files changed, 25 insertions(+)