| Message ID | e858ff6509e0d3f657fd9229b28f4ac177a04a76.1549619502.git-series.maxime.ripard@bootlin.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | drm/sun4i: dsi: Add burst mode support | expand |
diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c index 2518a0d7567c..8e6392831e9d 100644 --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c @@ -372,9 +372,9 @@ static void sun6i_dsi_setup_burst(struct sun6i_dsi *dsi, struct mipi_dsi_device *device = dsi->device; u32 val = 0; - if ((mode->hsync_end - mode->hdisplay) > 20) { + if ((mode->hsync_start - mode->hdisplay) > 20) { /* Maaaaaagic */ - u16 drq = (mode->hsync_end - mode->hdisplay) - 20; + u16 drq = (mode->hsync_start - mode->hdisplay) - 20; drq *= mipi_dsi_pixel_format_to_bpp(device->format); drq /= 32;
The DRQ calculation code in the Allwinner BSP uses the vertical front porch value as the condition, but we're using the video back porch. Since I always confuse the two, and I'm the original author of that code, I guess I deserved a brown paper bag. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> --- drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)