| Message ID | f0fedb9e722eb18306d0a33e7997f90910417b17.1543321707.git-series.maxime.ripard@bootlin.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ARM: dts: sunxi: Cleanup DTC warnings | expand |
On Tue, Nov 27, 2018 at 8:46 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > Some boards override the MMC pin muxing settings in order to enable the > pull-ups and change the drive strength to a value higher than the default. > > While this was needed in the earlier days, this is now the default setting > for those pins, and therefore we don't need those board-specific settings > anymore. > > Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
On Wed, Nov 28, 2018 at 07:46:45PM +0800, Chen-Yu Tsai wrote: > On Tue, Nov 27, 2018 at 8:46 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote: > > > > Some boards override the MMC pin muxing settings in order to enable the > > pull-ups and change the drive strength to a value higher than the default. > > > > While this was needed in the earlier days, this is now the default setting > > for those pins, and therefore we don't need those board-specific settings > > anymore. > > > > Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> > > Acked-by: Chen-Yu Tsai <wens@csie.org> Applied, thanks! Maxime
diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts index 21584c2f968f..f9c4169a875d 100644 --- a/arch/arm/boot/dts/sun6i-a31-colombus.dts +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -121,10 +121,6 @@ status = "okay"; }; -&mmc0_pins_a { - bias-pull-up; -}; - &pio { i2c_lcd_pins: i2c_lcd_pin@0 { pins = "PA23", "PA24"; diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index 65b1b6e9180f..f38413fd9906 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -214,11 +214,6 @@ status = "okay"; }; -&mmc0_pins_a { - /* external pull-ups missing for some pins */ - bias-pull-up; -}; - &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins_a>; diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts index 016b23831cec..14e27e81ddf8 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -120,10 +120,6 @@ status = "okay"; }; -&mmc0_pins_a { - bias-pull-up; -}; - &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins_a>; @@ -142,10 +138,6 @@ }; }; -&mmc2_pins_a { - bias-pull-up; -}; - &ohci0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts index 2d8dc4321b7b..153e40d6f4c5 100644 --- a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts @@ -98,10 +98,6 @@ status = "okay"; }; -&mmc0_pins_a { - bias-pull-up; -}; - &p2wi { status = "okay";
Some boards override the MMC pin muxing settings in order to enable the pull-ups and change the drive strength to a value higher than the default. While this was needed in the earlier days, this is now the default setting for those pins, and therefore we don't need those board-specific settings anymore. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> --- arch/arm/boot/dts/sun6i-a31-colombus.dts | 4 ---- arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 5 ----- arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 8 -------- arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts | 4 ---- 4 files changed, 21 deletions(-)