Message ID | f6fdf1f810de1cd9ad4d9e3d45f7c5065156c79e.1434622147.git.viresh.kumar@linaro.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On 18/06/2015 at 16:24:44 +0530, Viresh Kumar wrote : > Migrate atmel driver to the new 'set-state' interface provided by > clockevents core, the earlier 'set-mode' interface is marked obsolete > now. > > This also enables us to implement callbacks for new states of clockevent > devices, for example: ONESHOT_STOPPED. > > Cc: Nicolas Ferre <nicolas.ferre@atmel.com> > Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> > Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> > --- > drivers/clocksource/timer-atmel-pit.c | 41 +++++++++++++++-------------------- > 1 file changed, 18 insertions(+), 23 deletions(-) > > diff --git a/drivers/clocksource/timer-atmel-pit.c b/drivers/clocksource/timer-atmel-pit.c > index c0304ff608b0..58753223585b 100644 > --- a/drivers/clocksource/timer-atmel-pit.c > +++ b/drivers/clocksource/timer-atmel-pit.c > @@ -90,33 +90,27 @@ static cycle_t read_pit_clk(struct clocksource *cs) > return elapsed; > } > > +static int pit_clkevt_shutdown(struct clock_event_device *dev) > +{ > + struct pit_data *data = clkevt_to_pit_data(dev); > + > + /* disable irq, leaving the clocksource active */ > + pit_write(data->base, AT91_PIT_MR, (data->cycle - 1) | AT91_PIT_PITEN); > + return 0; > +} > + > /* > * Clockevent device: interrupts every 1/HZ (== pit_cycles * MCK/16) > */ > -static void > -pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev) > +static int pit_clkevt_set_periodic(struct clock_event_device *dev) > { > struct pit_data *data = clkevt_to_pit_data(dev); > > - switch (mode) { > - case CLOCK_EVT_MODE_PERIODIC: > - /* update clocksource counter */ > - data->cnt += data->cycle * PIT_PICNT(pit_read(data->base, AT91_PIT_PIVR)); > - pit_write(data->base, AT91_PIT_MR, > - (data->cycle - 1) | AT91_PIT_PITEN | AT91_PIT_PITIEN); > - break; > - case CLOCK_EVT_MODE_ONESHOT: > - BUG(); > - /* FALLTHROUGH */ > - case CLOCK_EVT_MODE_SHUTDOWN: > - case CLOCK_EVT_MODE_UNUSED: > - /* disable irq, leaving the clocksource active */ > - pit_write(data->base, AT91_PIT_MR, > - (data->cycle - 1) | AT91_PIT_PITEN); > - break; > - case CLOCK_EVT_MODE_RESUME: > - break; > - } > + /* update clocksource counter */ > + data->cnt += data->cycle * PIT_PICNT(pit_read(data->base, AT91_PIT_PIVR)); > + pit_write(data->base, AT91_PIT_MR, > + (data->cycle - 1) | AT91_PIT_PITEN | AT91_PIT_PITIEN); > + return 0; > } > > static void at91sam926x_pit_suspend(struct clock_event_device *cedev) > @@ -162,7 +156,7 @@ static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id) > WARN_ON_ONCE(!irqs_disabled()); > > /* The PIT interrupt may be disabled, and is shared */ > - if ((data->clkevt.mode == CLOCK_EVT_MODE_PERIODIC) && > + if (clockevent_state_periodic(&data->clkevt) && > (pit_read(data->base, AT91_PIT_SR) & AT91_PIT_PITS)) { > unsigned nr_ticks; > > @@ -227,7 +221,8 @@ static void __init at91sam926x_pit_common_init(struct pit_data *data) > data->clkevt.rating = 100; > data->clkevt.cpumask = cpumask_of(0); > > - data->clkevt.set_mode = pit_clkevt_mode; > + data->clkevt.set_state_shutdown = pit_clkevt_shutdown; > + data->clkevt.set_state_periodic = pit_clkevt_set_periodic; > data->clkevt.resume = at91sam926x_pit_resume; > data->clkevt.suspend = at91sam926x_pit_suspend; > clockevents_register_device(&data->clkevt); > -- > 2.4.0 >
diff --git a/drivers/clocksource/timer-atmel-pit.c b/drivers/clocksource/timer-atmel-pit.c index c0304ff608b0..58753223585b 100644 --- a/drivers/clocksource/timer-atmel-pit.c +++ b/drivers/clocksource/timer-atmel-pit.c @@ -90,33 +90,27 @@ static cycle_t read_pit_clk(struct clocksource *cs) return elapsed; } +static int pit_clkevt_shutdown(struct clock_event_device *dev) +{ + struct pit_data *data = clkevt_to_pit_data(dev); + + /* disable irq, leaving the clocksource active */ + pit_write(data->base, AT91_PIT_MR, (data->cycle - 1) | AT91_PIT_PITEN); + return 0; +} + /* * Clockevent device: interrupts every 1/HZ (== pit_cycles * MCK/16) */ -static void -pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev) +static int pit_clkevt_set_periodic(struct clock_event_device *dev) { struct pit_data *data = clkevt_to_pit_data(dev); - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - /* update clocksource counter */ - data->cnt += data->cycle * PIT_PICNT(pit_read(data->base, AT91_PIT_PIVR)); - pit_write(data->base, AT91_PIT_MR, - (data->cycle - 1) | AT91_PIT_PITEN | AT91_PIT_PITIEN); - break; - case CLOCK_EVT_MODE_ONESHOT: - BUG(); - /* FALLTHROUGH */ - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_UNUSED: - /* disable irq, leaving the clocksource active */ - pit_write(data->base, AT91_PIT_MR, - (data->cycle - 1) | AT91_PIT_PITEN); - break; - case CLOCK_EVT_MODE_RESUME: - break; - } + /* update clocksource counter */ + data->cnt += data->cycle * PIT_PICNT(pit_read(data->base, AT91_PIT_PIVR)); + pit_write(data->base, AT91_PIT_MR, + (data->cycle - 1) | AT91_PIT_PITEN | AT91_PIT_PITIEN); + return 0; } static void at91sam926x_pit_suspend(struct clock_event_device *cedev) @@ -162,7 +156,7 @@ static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id) WARN_ON_ONCE(!irqs_disabled()); /* The PIT interrupt may be disabled, and is shared */ - if ((data->clkevt.mode == CLOCK_EVT_MODE_PERIODIC) && + if (clockevent_state_periodic(&data->clkevt) && (pit_read(data->base, AT91_PIT_SR) & AT91_PIT_PITS)) { unsigned nr_ticks; @@ -227,7 +221,8 @@ static void __init at91sam926x_pit_common_init(struct pit_data *data) data->clkevt.rating = 100; data->clkevt.cpumask = cpumask_of(0); - data->clkevt.set_mode = pit_clkevt_mode; + data->clkevt.set_state_shutdown = pit_clkevt_shutdown; + data->clkevt.set_state_periodic = pit_clkevt_set_periodic; data->clkevt.resume = at91sam926x_pit_resume; data->clkevt.suspend = at91sam926x_pit_suspend; clockevents_register_device(&data->clkevt);
Migrate atmel driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> --- drivers/clocksource/timer-atmel-pit.c | 41 +++++++++++++++-------------------- 1 file changed, 18 insertions(+), 23 deletions(-)