| Message ID | f7a004f7905badbd8e6fea7fd8591a498b396b9d.1483980339.git-series.maxime.ripard@free-electrons.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 09/01/17 16:46, Maxime Ripard wrote: > The A64 only has a single set of pins for each MMC controller. Since we > already have boards that require all of them, let's add them to the DTSI. This matches my reworked version from the previous series, so: Reviewed-by: Andre Przywara <andre.przywara@arm.com> Cheers, Andre. > > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> > --- > arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 25 ++++++++++++++++++++- > 1 file changed, 25 insertions(+), 0 deletions(-) > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi > index 143e9706438f..8e149498e096 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi > @@ -205,6 +205,31 @@ > function = "i2c1"; > }; > > + mmc0_pins: mmc0-pins { > + pins = "PF0", "PF1", "PF2", "PF3", > + "PF4", "PF5"; > + function = "mmc0"; > + drive-strength = <30>; > + bias-pull-up; > + }; > + > + mmc1_pins: mmc1-pins { > + pins = "PG0", "PG1", "PG2", "PG3", > + "PG4", "PG5"; > + function = "mmc1"; > + drive-strength = <30>; > + bias-pull-up; > + }; > + > + mmc2_pins: mmc2-pins { > + pins = "PC1", "PC5", "PC6", "PC8", "PC9", > + "PC10","PC11", "PC12", "PC13", > + "PC14", "PC15", "PC16"; > + function = "mmc2"; > + drive-strength = <30>; > + bias-pull-up; > + }; > + > uart0_pins_a: uart0@0 { > pins = "PB8", "PB9"; > function = "uart0"; >
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 143e9706438f..8e149498e096 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -205,6 +205,31 @@ function = "i2c1"; }; + mmc0_pins: mmc0-pins { + pins = "PF0", "PF1", "PF2", "PF3", + "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; + }; + + mmc1_pins: mmc1-pins { + pins = "PG0", "PG1", "PG2", "PG3", + "PG4", "PG5"; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; + }; + + mmc2_pins: mmc2-pins { + pins = "PC1", "PC5", "PC6", "PC8", "PC9", + "PC10","PC11", "PC12", "PC13", + "PC14", "PC15", "PC16"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; + }; + uart0_pins_a: uart0@0 { pins = "PB8", "PB9"; function = "uart0";
The A64 only has a single set of pins for each MMC controller. Since we already have boards that require all of them, let's add them to the DTSI. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> --- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 25 ++++++++++++++++++++- 1 file changed, 25 insertions(+), 0 deletions(-)