diff mbox series

[v1,2/3] arm64: dts: librem5-devkit: Make LED use PWM

Message ID fac9bc2b1a7c5505d863783726a9b4110e518a8f.1665318256.git.agx@sigxcpu.org (mailing list archive)
State New, archived
Headers show
Series librem5-devkit: Let LED use PWM | expand

Commit Message

Guido Günther Oct. 9, 2022, 12:26 p.m. UTC 
We can use PWM instead of just GPIO allowing us to control brightness.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
---
 .../dts/freescale/imx8mq-librem5-devkit.dts    | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

Comments

Shawn Guo Oct. 29, 2022, 1:15 a.m. UTC | #1 
On Sun, Oct 09, 2022 at 02:26:54PM +0200, Guido Günther wrote:
> We can use PWM instead of just GPIO allowing us to control brightness.
> 
> Signed-off-by: Guido Günther <agx@sigxcpu.org>

Applied, thanks!
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 6445c6b90b5b..7e4b6d65fd89 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -61,14 +61,12 @@  button-3 {
 	};
 
 	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpio_leds>;
+		compatible = "pwm-leds";
 
 		led1 {
 			label = "LED 1";
-			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
+			max-brightness = <248>;
+			pwms = <&pwm2 0 50000 0>;
 		};
 	};
 
@@ -615,9 +613,9 @@  MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x19  /* TOUCH RST */
 		>;
 	};
 
-	pinctrl_gpio_leds: gpioledgrp {
+	pinctrl_pwm_led: pwmledgrp {
 		fsl,pins = <
-			MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x16
+			MX8MQ_IOMUXC_GPIO1_IO13_PWM2_OUT	0x16
 		>;
 	};
 
@@ -920,6 +918,12 @@  &pwm1 {
 	status = "okay";
 };
 
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_led>;
+	status = "okay";
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };