diff mbox series

[45/58] arm64: dts: renesas: r8a77965: Move timer node

Message ID ff55027185bcd86a4cf6428212225c0fa37aad0e.1536828567.git.horms+renesas@verge.net.au (mailing list archive)
State New, archived
Headers show
Series [GIT,PULL] Renesas ARM64 Based SoC DT Updates for v4.20 | expand

Commit Message

Simon Horman Sept. 13, 2018, 9:09 a.m. UTC
From: Geert Uytterhoeven <geert+renesas@glider.be>

To preserve alphabetical sort order.

Fixes: 4c529600eef0a6b7 ("arm64: dts: renesas: r8a77965: Add R-Car Gen3 thermal support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm64/boot/dts/renesas/r8a77965.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index 83f469d6a680..7f477a15fa59 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -1932,14 +1932,6 @@ 
 		};
 	};
 
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-	};
-
 	thermal-zones {
 		sensor_thermal1: sensor-thermal1 {
 			polling-delay-passive = <250>;
@@ -1984,6 +1976,14 @@ 
 		};
 	};
 
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
 	/* External USB clocks - can be overridden by the board */
 	usb3s0_clk: usb3s0 {
 		compatible = "fixed-clock";