mbox series

[0/4] Add labibb regulator support for LCD display mode

Message ID 1560337252-27193-1-git-send-email-nishakumari@codeaurora.org (mailing list archive)
Headers show
Series Add labibb regulator support for LCD display mode | expand

Message

Nisha Kumari June 12, 2019, 11 a.m. UTC
This patch series adds the labibb regulator for supporting LCD display mode
on SDM845.

Nisha Kumari (4):
  dt-bindings: regulator: Add labibb regulator
  arm64: dts: qcom: pmi8998: Add nodes for LAB and IBB regulators
  regulator: Add labibb driver
  regulator: adding interrupt handling in labibb regulator

 .../bindings/regulator/qcom-labibb-regulator.txt   |  57 ++
 arch/arm64/boot/dts/qcom/pmi8998.dtsi              |  22 +
 drivers/regulator/Kconfig                          |  10 +
 drivers/regulator/Makefile                         |   1 +
 drivers/regulator/qcom-labibb-regulator.c          | 599 +++++++++++++++++++++
 5 files changed, 689 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.txt
 create mode 100644 drivers/regulator/qcom-labibb-regulator.c