mbox series

[V3,00/10] remoteproc: qcom: q6v5-wcss: Add support for secure pil

Message ID 1574867574-2216-1-git-send-email-gokulsri@codeaurora.org (mailing list archive)
Headers show
Series remoteproc: qcom: q6v5-wcss: Add support for secure pil | expand

Message

Gokul Sriram Palanisamy Nov. 27, 2019, 3:12 p.m. UTC 
IPQ8074 needs support for secure pil as well.
Also, currently only unified firmware is supported.
IPQ8074 supports split firmware for q6 and m3, so
adding support for that.

Also, this series is based on Govind’s,
“[v5] Add non PAS wcss Q6 support for QCS404”
https://patchwork.kernel.org/cover/11060629/

[V3] Fixed all comments.

Gokul Sriram Palanisamy (10):
  remoteproc: qcom: Add PRNG proxy clock
  remoteproc: qcom: Add secure PIL support
  remoteproc: qcom: Add support for split q6 + m3 wlan firmware
  remoteproc: qcom: Add ssr subdevice identifier
  remoteproc: qcom: Update regmap offsets for halt register
  dt-bindings: clock: qcom: Add reset for WCSSAON
  clk: qcom: Add WCSSAON reset
  dt-bindings: firmware: qcom: Add compatible for IPQ8074 SoC
  arm64: dts: Add support for scm on IPQ8074 SoCs
  arm64: dts: qcom: Enable Q6v5 WCSS for ipq8074 SoC

 .../devicetree/bindings/firmware/qcom,scm.txt      |   1 +
 arch/arm64/boot/dts/qcom/ipq8074.dtsi              | 127 +++++++++++++++++
 drivers/clk/qcom/gcc-ipq8074.c                     |   1 +
 drivers/remoteproc/qcom_q6v5_wcss.c                | 155 ++++++++++++++++-----
 include/dt-bindings/clock/qcom,gcc-ipq8074.h       |   1 +
 5 files changed, 254 insertions(+), 31 deletions(-)