mbox series

[v4,0/3] sc7180: Add A618 GPU bindings

Message ID 1580886097-6312-1-git-send-email-smasetty@codeaurora.org (mailing list archive)
Headers show
Series sc7180: Add A618 GPU bindings | expand

Message

Sharat Masetty Feb. 5, 2020, 7:01 a.m. UTC
I used this branch qcom/arm64-for-5.6-to-be-rebased as suggested by Matthias.
This patch needs the clock patches and the clock patches have not yet landed, so

please apply the following series and patches in order
a) All patches from https://patchwork.kernel.org/project/linux-clk/list/?series=203517&state=%2a&archive=both
b) Patches 1 and 2 from https://patchwork.kernel.org/project/linux-clk/list/?series=203527&archive=both&state=%2a
c) All patches from https://patchwork.kernel.org/project/linux-clk/list/?series=221739&archive=both&state=%2a
d) https://lore.kernel.org/linux-arm-msm/20200124144154.v2.10.I1a4b93fb005791e29a9dcf288fc8bd459a555a59%40changeid/raw
e) This patch "arm64: dts: qcom: sc7180: Add A618 gpu dt blob"

v3: Addressed review comments from previous submits. Also removed the
interconnect bindings from this patch and I will submit as a new patch with its
dependencies listed. Also I will be sending a new patch for updating the
bindings documentation.

v4: Add GX_GDSC power domain binding for GMU

Sharat Masetty (1):
  arm64: dts: qcom: sc7180: Add A618 gpu dt blob

Taniya Das (2):
  dt-bindings: clk: qcom: Add support for GPU GX GDSCR
  clk: qcom: gpucc: Add support for GX GDSC for SC7180

 arch/arm64/boot/dts/qcom/sc7180.dtsi          | 102 ++++++++++++++++++++++++++
 drivers/clk/qcom/gpucc-sc7180.c               |  37 ++++++++++
 include/dt-bindings/clock/qcom,gpucc-sc7180.h |   3 +-
 3 files changed, 141 insertions(+), 1 deletion(-)

--
1.9.1