[v5,0/5] Add SS/HS-USB changes for Qualcomm SM8150 chipset

Message

Wesley Cheng April 3, 2020, 2:23 a.m. UTC

This series adds support for the Synopsis 7nm HSPHY USB driver being
used in QCOM chipsets.  The HSPHY register map differs compared to 
other PHY revisions.  In addition, modifications and updates are done
to the QMP driver to add new registers/offsets, and to update the
initialization sequence for enabling the SSUSB path on SM8150.

Changes in v5:
 - Reorganize IF check for when to use the proper PWRDOWN CTRL offset
 - Rename UFS specific offset definitions in the QMP PHY driver to clearly
   denote they are UFS specific
 - Rename the phy-qcom-snps-7nm driver to phy-qcom-snps-femto-v2

Changes in v4:
 - Fix POWERDOWN offset for QMP PHY exit routine, and check for
   has_phy_dp_com_ctrl instead of !has_phy_com_ctrl

Changes in v3:
 - Use devm_reset_control_get_exclusive instead of referencing index for
   reset handle

Changes in v2:
 - Fixed YAML errors caught by dt_binding_check

Jack Pham (1):
  phy: qcom-qmp: Add SM8150 QMP USB3 PHY support

Wesley Cheng (4):
  dt-bindings: phy: Add binding for qcom,usb-snps-femto-v2
  phy: qcom-snps: Add SNPS USB PHY driver for QCOM based SOCs
  phy: qcom-qmp: Use proper PWRDOWN offset for sm8150 USB
  phy: qcom-qmp: Rename UFS PCS QMP v4 registers

 .../bindings/phy/qcom,usb-snps-femto-v2.yaml       |  77 ++++++
 drivers/phy/qualcomm/Kconfig                       |  10 +
 drivers/phy/qualcomm/Makefile                      |   1 +
 drivers/phy/qualcomm/phy-qcom-qmp.c                | 193 ++++++++++++-
 drivers/phy/qualcomm/phy-qcom-qmp.h                | 238 +++++++++++++++--
 drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c      | 297 +++++++++++++++++++++
 6 files changed, 780 insertions(+), 36 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
 create mode 100644 drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c