mbox series

[v4,0/2] Enable SS/HS USB support on SM8150

Message ID 1586566362-21450-1-git-send-email-wcheng@codeaurora.org (mailing list archive)
Headers show
Series Enable SS/HS USB support on SM8150 | expand

Message

Wesley Cheng April 11, 2020, 12:52 a.m. UTC 
Add required device tree nodes to enable the USB SS and HS
paths on the primary USB controller on SM8150.  In addition,
implement missing resources from the SM8150 GCC driver, which
includes the USB GDSC and the USB PIPE clocks.

Changes in v4:
 - Re-ordered compatible cells for usb_1_hsphy and usb_1 to select by
   the platform first.

Changes in v3:
 - Set dr_mode to "peripheral" on the SM8150 MTP DTSI file.

Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>

Changes in v2:
 - Combine GDSC and USB PIPE clock changes.
 - Re-order DTS nodes based on address

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>

Jack Pham (1):
  arm64: dts: qcom: sm8150: Add USB and PHY device nodes

Wesley Cheng (1):
  clk: qcom: gcc: Add USB3 PIPE clock and GDSC for SM8150

 arch/arm64/boot/dts/qcom/sm8150-mtp.dts     | 21 +++++++
 arch/arm64/boot/dts/qcom/sm8150.dtsi        | 92 +++++++++++++++++++++++++++++
 drivers/clk/qcom/gcc-sm8150.c               | 52 ++++++++++++++++
 include/dt-bindings/clock/qcom,gcc-sm8150.h |  4 ++
 4 files changed, 169 insertions(+)