mbox series

[v2,0/3] usb: dwc3: Host wake up support from system suspend

Message ID 1594235417-23066-1-git-send-email-sanm@codeaurora.org (mailing list archive)
Headers show
Series usb: dwc3: Host wake up support from system suspend | expand

Message

Sandeep Maheswaram July 8, 2020, 7:10 p.m. UTC 
Avoiding phy powerdown in host mode so that it can be wake up by devices.
Set GENPD_FLAG_ACTIVE_WAKEUP flag to keep usb30_prim gdsc active
when wakeup capable devices are connected to the host.
Using PDC interrupts instead of GIC interrupst to support wakeup in
xo shutdown case.

Changes in v2:
Dropped the patch in clock to set GENPD_FLAG_ACTIVE_WAKEUP flag and 
setting in usb dwc3 driver.
Separated the core patch and glue driver patch.
Made need_phy_for_wakeup flag part of dwc structure and 
hs_phy_flags as unsgined int.
Adrressed the comment on device_init_wakeup call.
Corrected offset for reading portsc register.
Added pacth to support wakeup in xo shutdown case.



Sandeep Maheswaram (3):
  usb: dwc3: core: Host wake up support from system suspend
  usb: dwc3: qcom: Configure wakeup interrupts and set genpd active
    wakeup flag
  arm64: dts: qcom: sc7180: Use pdc interrupts for USB instead of GIC
    interrupts

 arch/arm64/boot/dts/qcom/sc7180.dtsi |  8 ++--
 drivers/usb/dwc3/core.c              | 47 +++++++++++++++++++----
 drivers/usb/dwc3/core.h              |  2 +
 drivers/usb/dwc3/dwc3-qcom.c         | 73 ++++++++++++++++++++++++++++--------
 4 files changed, 103 insertions(+), 27 deletions(-)