mbox series

[v6,0/5] USB DWC3 host wake up support from system suspend

Message ID 1618567313-25373-1-git-send-email-sanm@codeaurora.org (mailing list archive)
Headers show
Series USB DWC3 host wake up support from system suspend | expand

Message

Sandeep Maheswaram April 16, 2021, 10:01 a.m. UTC
Avoiding phy powerdown in host mode when wakeup capable devices are 
connected, so that it can be wake up by devices.
Set GENPD_FLAG_ACTIVE_WAKEUP flag to keep usb30_prim gdsc active
when wakeup capable devices are connected to the host.

Changes in v6:
Addressed comments in host.c and core.c
Separated the patches in dwc3-qcom.c to make it simple.
Dropped wakeup-source change as it is not related to this series.

Changes in v5:
Added phy_power_off flag to check presence of wakeup capable devices.
Dropped patch[v4,4/5] as it is present linux-next.
Addressed comments in host.c and dwc3-qcom.c.

Changes in v4:
Addressed Matthias comments raised in v3.

Changes in v3:
Removed need_phy_for_wakeup flag and by default avoiding phy powerdown.
Addressed Matthias comments and added entry for DEV_SUPERSPEED.
Added suspend_quirk in dwc3 host and moved the dwc3_set_phy_speed_flags.
Added wakeup-source dt entry and reading in dwc-qcom.c glue driver.

Changes in v2:
Dropped the patch in clock to set GENPD_FLAG_ACTIVE_WAKEUP flag and 
setting in usb dwc3 driver.
Separated the core patch and glue driver patch.
Made need_phy_for_wakeup flag part of dwc structure and 
hs_phy_flags as unsgined int.
Adrressed the comment on device_init_wakeup call.
Corrected offset for reading portsc register.
Added pacth to support wakeup in xo shutdown case.

Sandeep Maheswaram (5):
  usb: dwc3: host: Add suspend_quirk for dwc3 host
  usb: dwc3: core: Host wake up support from system suspend
  usb: dwc3: qcom: Add helper functions to enable,disable wake irqs
  usb: dwc3: qcom: Configure wakeup interrupts during suspend
  usb: dwc3: qcom: Set genpd active wakeup flag for usb gdsc

 drivers/usb/dwc3/core.c      |  7 ++--
 drivers/usb/dwc3/core.h      |  3 ++
 drivers/usb/dwc3/dwc3-qcom.c | 85 ++++++++++++++++++++++++++++----------------
 drivers/usb/dwc3/host.c      | 59 ++++++++++++++++++++++++++++++
 4 files changed, 122 insertions(+), 32 deletions(-)