mbox series

[V6,0/7] Add QSPI and QUPv3 DT nodes for SC7280 SoC

Message ID 1629983731-10595-1-git-send-email-rajpat@codeaurora.org (mailing list archive)
Headers show
Series Add QSPI and QUPv3 DT nodes for SC7280 SoC | expand

Message

Rajesh Patil Aug. 26, 2021, 1:15 p.m. UTC
Changes in V6:
 - As per Matthias' comments,
   1. Squashed "Update QUPv3 UART5 DT node" and "Configure debug uart for sc7280-idp"
   2. Moved qup_opp_table from /soc to /
   3. Changed convention "clocks" followed by "clock-names"

 - As per Doug comments, added aliases for i2c and spi

Changes in V5:
 - As per Matthias' comments, I've split the patches as below:
   1. Add QSPI node
   2. Configure SPI-NOR FLASH for sc7280-idp
   3. Add QUPv3 wrapper_0 nodes
   4. Update QUPv3 UART5 DT node
   5. Configure debug uart for sc7280-idp
   6. Configure uart7 to support bluetooth on sc7280-idp
   7. Add QUPv3 wrapper_1 nodes

Changes in V4:
 - As per Stephen's comment updated spi-max-frequency to 37.5MHz, moved
   qspi_opp_table from /soc to / (root).
 - As per Bjorn's comment, added QUP Wrapper_0 nodes
   as separate patch and debug-uart node as separate patch.
 - Dropped interconnect votes for wrapper_0 and wrapper_1 node
 - Corrected QUP Wrapper_1 SE node's pin control functions like below
        QUP Wrapper_0: SE0-SE7 uses qup00 - qup07 pin-cntrl functions.
        QUP Wrapper_1: SE0-SE7 uses qup10 - qup17 pin-cntrl functions.

Changes in V3:
 - Broken the huge V2 patch into 3 smaller patches.
   1. QSPI DT nodes
   2. QUP wrapper_0 DT nodes
   3. QUP wrapper_1 DT nodes

Changes in V2:
 - As per Doug's comments removed pinmux/pinconf subnodes.
 - As per Doug's comments split of SPI, UART nodes has been done.
 - Moved QSPI node before aps_smmu as per the order.

Rajesh Patil (3):
  arm64: dts: sc7280: Configure SPI-NOR FLASH for sc7280-idp
  arm64: dts: sc7280: Configure uart7 to support bluetooth on sc7280-idp
  arm64: dts: sc7280: Add aliases for I2C and SPI

Roja Rani Yarubandi (4):
  arm64: dts: sc7280: Add QSPI node
  arm64: dts: sc7280: Add QUPv3 wrapper_0 nodes
  arm64: dts: sc7280: Update QUPv3 UART5 DT node
  arm64: dts: sc7280: Add QUPv3 wrapper_1 nodes

 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi |  129 +-
 arch/arm64/boot/dts/qcom/sc7280.dtsi     | 3197 ++++++++++++++++++++++--------
 2 files changed, 2511 insertions(+), 815 deletions(-)