mbox series

[v3,0/4] Add support for the eDP panel on sc7280 CRD

Message ID 1644396932-17932-1-git-send-email-quic_sbillaka@quicinc.com (mailing list archive)
Headers show
Series Add support for the eDP panel on sc7280 CRD | expand

Message

Sankeerth Billakanti (QUIC) Feb. 9, 2022, 8:55 a.m. UTC 
Add support for the eDP panel on sc7280 CRD platform. The eDP panel does
not need HPD line for connect disconnect. So, this series will report eDP
as always connected. The driver needs to register for IRQ_HPD only for eDP.
This support will be added later.

These changes are dependent on the following series:
https://patchwork.kernel.org/project/linux-arm-msm/list/?series=586263&archive=both&state=*
https://patchwork.kernel.org/project/linux-arm-msm/list/?series=560587&state=%2A&archive=both


Sankeerth Billakanti (4):
  dt-bindings: display: simple: Add sharp LQ140M1JW46 panel
  arm64: dts: qcom: sc7280: Add support for eDP panel on CRD
  drm/panel-edp: Add eDP sharp panel support
  drm/msm/dp: Add driver support to utilize drm panel

 .../bindings/display/panel/panel-simple.yaml       |   2 +
 arch/arm64/boot/dts/qcom/sc7280-crd.dts            | 122 +++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sc7280.dtsi               |   2 +-
 drivers/gpu/drm/msm/dp/dp_display.c                |   8 ++
 drivers/gpu/drm/msm/dp/dp_drm.c                    |  54 ++++++++-
 drivers/gpu/drm/msm/dp/dp_parser.h                 |   3 +
 drivers/gpu/drm/panel/panel-edp.c                  |  31 ++++++
 7 files changed, 216 insertions(+), 6 deletions(-)