mbox series

[v14,0/7] USB DWC3 host wake up support from system suspend

Message ID 1650395470-31333-1-git-send-email-quic_c_sanm@quicinc.com (mailing list archive)
Headers show
Series USB DWC3 host wake up support from system suspend | expand

Message

Sandeep Maheswaram April 19, 2022, 7:11 p.m. UTC
Avoiding phy powerdown in host mode when wakeup capable devices are 
connected, so that it can be wake up by devices.
Keep usb30_prim gdsc active to retain controller status
during suspend/resume.

Changes in v14:
Added patch for device_children_wakeup_capable.
Used device_children_wakeup_capable instead of usb_wakeup_enabled_descendants.
Fixed minor nit picks in v13 reported by Matthias.

Changes in v13:
Moved the dt bindings patch to start.
Changed dwc3_set_phy_speed_mode to dwc3_check_phy_speed_mode.
Check wakep-source property for dwc3 core node to set the
wakeup capability. Drop the device_init_wakeup call from
runtime suspend and resume.
Added GENPD_FLAG_RPM_ALWAYS_ON and set GENPD_FLAG_ALWAYS_ON if
wakeup is supported.

Changes in v12:
Squashed PATCH 1/5 and 2/5 of v11.
Added dt bindings and device tree entry for wakeup-source property
for dwc3 core node.
Dropped redundant phy_set_mode call.


Changes in v11:
Moving back to v8 version
https://patchwork.kernel.org/project/linux-arm-msm/cover/1624882097-23265-1-git-send-email-sanm@codeaurora.org
as we are getting interrupts during suspend
when enabling both DP hs phy irq and DM hs phy irq.
Moved the set phy mode function to dwc3/core.c from xhci-plat.c
We didn't find any other option other than accessing xhci from dwc.

Changes in v10:
PATCH 1/6: Change device_set_wakeup_capable to device_set_wakeup_enable
PATCH 2/6: Remove redundant else part in dwc3_resume_common
PATCH 4/6: Change the irg flags
PATCH 5/6: Set flag GENPD_FLAG_ALWAYS_ON
PATCH 6/6: Remove disable interrupts function and enable
interrupts in probe.


Changes in v9:
Checking with device_may_makeup property instead of phy_power_off flag.
Changed the IRQ flags and removed hs_phy_mode variable.

Changes in v8:
Moved the dwc3 suspend quirk code in dwc3/host.c to xhci-plat.c
Checking phy_power_off flag instead of usb_wakeup_enabled_descendants 
to keep gdsc active.

Changes in v7:
Change in commit text and message in PATCH 1/5 and PATCH 5/5
as per Matthias suggestion.
Added curly braces for if and else if sections in PATCH 4/5.

Changes in v6:
Addressed comments in host.c and core.c
Separated the patches in dwc3-qcom.c to make it simple.
Dropped wakeup-source change as it is not related to this series.

Changes in v5:
Added phy_power_off flag to check presence of wakeup capable devices.
Dropped patch[v4,4/5] as it is present linux-next.
Addressed comments in host.c and dwc3-qcom.c.

Changes in v4:
Addressed Matthias comments raised in v3.

Changes in v3:
Removed need_phy_for_wakeup flag and by default avoiding phy powerdown.
Addressed Matthias comments and added entry for DEV_SUPERSPEED.
Added suspend_quirk in dwc3 host and moved the dwc3_set_phy_speed_flags.
Added wakeup-source dt entry and reading in dwc-qcom.c glue driver.

Changes in v2:
Dropped the patch in clock to set GENPD_FLAG_ACTIVE_WAKEUP flag and 
setting in usb dwc3 driver.
Separated the core patch and glue driver patch.
Made need_phy_for_wakeup flag part of dwc structure and 
hs_phy_flags as unsgined int.
Adrressed the comment on device_init_wakeup call.
Corrected offset for reading portsc register.
Added pacth to support wakeup in xo shutdown case.

Matthias Kaehlcke (1):
  PM / wakeup: Add device_children_wakeup_capable()

Sandeep Maheswaram (6):
  dt-bindings: usb: dwc3: Add wakeup-source property support
  usb: dwc3: core: Host wake up support from system suspend
  usb: dwc3: qcom: Add helper functions to enable,disable wake irqs
  usb: dwc3: qcom: Configure wakeup interrupts during suspend
  usb: dwc3: qcom: Keep power domain on to retain controller status
  arm64: dts: qcom: sc7280: Add wakeup-source property for USB node

 .../devicetree/bindings/usb/snps,dwc3.yaml         |  5 ++
 arch/arm64/boot/dts/qcom/sc7280.dtsi               |  1 +
 drivers/base/power/wakeup.c                        | 18 +++++
 drivers/usb/dwc3/core.c                            | 33 ++++----
 drivers/usb/dwc3/core.h                            |  4 +
 drivers/usb/dwc3/dwc3-qcom.c                       | 91 +++++++++++++---------
 drivers/usb/dwc3/host.c                            | 24 ++++++
 include/linux/pm_wakeup.h                          |  7 ++
 8 files changed, 133 insertions(+), 50 deletions(-)

Comments

patchwork-bot+linux-arm-msm@kernel.org April 19, 2022, 8:40 p.m. UTC | #1
Hello:

This series was applied to qcom/linux.git (for-next)
by Bjorn Andersson <bjorn.andersson@linaro.org>:

On Wed, 20 Apr 2022 00:41:03 +0530 you wrote:
> Avoiding phy powerdown in host mode when wakeup capable devices are
> connected, so that it can be wake up by devices.
> Keep usb30_prim gdsc active to retain controller status
> during suspend/resume.
> 
> Changes in v14:
> Added patch for device_children_wakeup_capable.
> Used device_children_wakeup_capable instead of usb_wakeup_enabled_descendants.
> Fixed minor nit picks in v13 reported by Matthias.
> 
> [...]

Here is the summary with links:
  - [v14,1/7] dt-bindings: usb: dwc3: Add wakeup-source property support
    (no matching commit)
  - [v14,2/7] PM / wakeup: Add device_children_wakeup_capable()
    (no matching commit)
  - [v14,3/7] usb: dwc3: core: Host wake up support from system suspend
    (no matching commit)
  - [v14,4/7] usb: dwc3: qcom: Add helper functions to enable,disable wake irqs
    (no matching commit)
  - [v14,5/7] usb: dwc3: qcom: Configure wakeup interrupts during suspend
    (no matching commit)
  - [v14,6/7] usb: dwc3: qcom: Keep power domain on to retain controller status
    (no matching commit)
  - [v14,7/7] arm64: dts: qcom: sc7280: Add wakeup-source property for USB node
    https://git.kernel.org/qcom/c/97276cbfb4fb

You are awesome, thank you!