| Message ID | 1657200184-29565-1-git-send-email-quic_srivasam@quicinc.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add soundcard support for sc7280 based platforms. | expand |
On Thu 07 Jul 08:22 CDT 2022, Srinivasa Rao Mandadapu wrote: > This patch set is to add bolero digital macros, WCD and maxim codecs nodes > for audio on sc7280 based platforms. > > This patch set depends on: > [LPASS DTS: wcd related pinmux reorg] > -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=657389 > [Clock DTS: reset control changes] > -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=638002 > [Clock: External MCLK and reset control driver changes] > -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=650267 As far as I understand I can't apply this series until Taniya's clock patches has been picked up? > [Clock DTS: lpasscc node disable and lpasscore node name changes] > -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=657325 You're the author of these 3 other patch sets, so why are you asking me to stitch them together, instead of just sending me one series that I can easily apply. If you want your patches merged, make it easy for the maintainer to merge them! Regards, Bjorn > > Changes Since V13: > -- Move digital codecs enabling to separate wcd specific dtsi file in CRD 3.0+ patches. > -- Remove redundant output high setting in wcd reset node. > -- Revert external mclk name. > -- Update dependency list. > -- Rebase as per latest kernel repository. > Changes Since V12: > -- Update 'lpasscore' clock node name to lpass_core to match latest clock patches. > -- Update external mclk0 name and it's source node. > -- Move sound node to separate wcd specific dtsi file. > -- Move CRD specific lpass_cpu node Enabling to separate wcd specific dtsi file. > -- Update dependency list. > Changes Since V11: > -- Remove output-low pinconf setting in wcd-reset-n-sleep node. > -- Update dependency list. > Changes Since V10: > -- Modify digital macro codecs pin control labels. > -- Updated dependency list. > Changes Since V9: > -- Move wcd codec and digital codec nodes to sc7280-qcard file. > -- Modify the reg property as per link number in sound node. > -- Fix the us-euro pin control usage in wcd codec node. > -- Move wcd pin control nodes to specific crd board files. > -- Sort max98360a codec node in alphabetical order. > -- Modify the commit messages. > Changes Since V8: > -- Split patches as per sc7280 CRD revision 3, 4 and 5 boards. > -- Add corresponding dt nodes for herobrine crd boards. > -- Update dai-link node names as per dt-bindings in sound node. > -- Add reg property in sound node as per dt-bindings which was removed in previous series. > -- Fix typo errors. > -- Update wcd codec pin control properties in board specific files. > Changes Since V7: > -- Remove redundant interrupt names in soundwire node. > -- Fix typo errors. > -- Remove redundant reg property in sound node. > -- Rebased on top of latest kernel tip. > Changes Since V6: > -- Modify link-names and audio routing in a sound node. > -- Move amp_en pin control node to appropriate consumer patch. > -- Split patches as per digital macro codecs and board specific codecs and sort it. > -- Modify label and node names to lpass specific. > Changes Since V5: > -- Move soc specific bolero digital codec nodes to soc specific file. > -- Bring wcd938x codec reset pin control and US/EURO HS selection nodes from other series. > -- Change node name and remove redundant status property in sound node. > Changes Since V4: > -- Update nodes in sorting order. > -- Update DTS node names as per dt-bindings. > -- Update Node properties in proper order. > -- Update missing pinctrl properties like US/EURO HS selection, wcd reset control. > -- Remove redundant labels. > -- Remove unused size cells and address cells in tx macro node. > -- Keep all same nodes at one place, which are defined in same file. > -- Add max98360a codec node to herobrine board specific targets. > Changes Since V3: > -- Move digital codec macro nodes to board specific dtsi file. > -- Update pin controls in lpass cpu node. > -- Update dependency patch list. > -- Create patches on latest kernel. > Changes Since V2: > -- Add power domains to digital codec macro nodes. > -- Change clock node usage in lpass cpu node. > -- Add codec mem clock to lpass cpu node. > -- Modify the node names to be generic. > -- Move sound and codec nodes to root node. > -- sort dai links as per reg. > -- Fix typo errors. > Changes Since V1: > -- Update the commit message of cpu node patch. > -- Add gpio control property to support Euro headset in wcd938x node. > -- Fix clock properties in lpass cpu and digital codec macro node. > > Srinivasa Rao Mandadapu (12): > arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital > macro codecs > arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD > 1.0/2.0 and IDP boards > arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD > 3.0/3.1 > arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 1.0/2.0 and > IDP boards > arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 3.0/3.1 > arm64: dts: qcom: sc7280: Add max98360a codec for CRD 1.0/2.0 and IDP > boards > arm64: dts: qcom: sc7280: herobrine: Add max98360a codec node > arm64: dts: qcom: sc7280: Add lpass cpu node > arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 1.0/2.0 and > IDP boards. > arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 3.0/3.1 > arm64: dts: qcom: sc7280: Add sound node for CRD 1.0/2.0 and IDP > boards > arm64: dts: qcom: sc7280: Add sound node for CRD 3.0/3.1 > > arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 37 ++++ > .../dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi | 155 +++++++++++++++ > arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 8 + > arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 216 +++++++++++++++++++++ > arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 73 +++++++ > arch/arm64/boot/dts/qcom/sc7280.dtsi | 190 ++++++++++++++++++ > 6 files changed, 679 insertions(+) > > -- > 2.7.4 >
On 7/7/2022 8:58 PM, Bjorn Andersson wrote: Thanks for your time Bjorn!!! > On Thu 07 Jul 08:22 CDT 2022, Srinivasa Rao Mandadapu wrote: > >> This patch set is to add bolero digital macros, WCD and maxim codecs nodes >> for audio on sc7280 based platforms. >> >> This patch set depends on: >> [LPASS DTS: wcd related pinmux reorg] >> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=657389 >> [Clock DTS: reset control changes] >> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=638002 >> [Clock: External MCLK and reset control driver changes] >> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=650267 > As far as I understand I can't apply this series until Taniya's clock > patches has been picked up? Okay. It seems Taniya's patches also in final stage of review. > >> [Clock DTS: lpasscc node disable and lpasscore node name changes] >> -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=657325 > You're the author of these 3 other patch sets, so why are you asking me > to stitch them together, instead of just sending me one series that I > can easily apply. Here 3 dependent patch series are of Clock Teams patches. only patch from me is [ LPASS DTS: wcd related pinmux reorg] patch. Which is not dependent on any other patch and can be applied directly as it's reviewed by. Will take care next time and will combine patches wherever is possible. > > If you want your patches merged, make it easy for the maintainer to > merge them! Sure. Will take care next time. For Now will keep it as it is, as it's independent patch and only one. > > Regards, > Bjorn > >> Changes Since V13: >> -- Move digital codecs enabling to separate wcd specific dtsi file in CRD 3.0+ patches. >> -- Remove redundant output high setting in wcd reset node. >> -- Revert external mclk name. >> -- Update dependency list. >> -- Rebase as per latest kernel repository. >> Changes Since V12: >> -- Update 'lpasscore' clock node name to lpass_core to match latest clock patches. >> -- Update external mclk0 name and it's source node. >> -- Move sound node to separate wcd specific dtsi file. >> -- Move CRD specific lpass_cpu node Enabling to separate wcd specific dtsi file. >> -- Update dependency list. >> Changes Since V11: >> -- Remove output-low pinconf setting in wcd-reset-n-sleep node. >> -- Update dependency list. >> Changes Since V10: >> -- Modify digital macro codecs pin control labels. >> -- Updated dependency list. >> Changes Since V9: >> -- Move wcd codec and digital codec nodes to sc7280-qcard file. >> -- Modify the reg property as per link number in sound node. >> -- Fix the us-euro pin control usage in wcd codec node. >> -- Move wcd pin control nodes to specific crd board files. >> -- Sort max98360a codec node in alphabetical order. >> -- Modify the commit messages. >> Changes Since V8: >> -- Split patches as per sc7280 CRD revision 3, 4 and 5 boards. >> -- Add corresponding dt nodes for herobrine crd boards. >> -- Update dai-link node names as per dt-bindings in sound node. >> -- Add reg property in sound node as per dt-bindings which was removed in previous series. >> -- Fix typo errors. >> -- Update wcd codec pin control properties in board specific files. >> Changes Since V7: >> -- Remove redundant interrupt names in soundwire node. >> -- Fix typo errors. >> -- Remove redundant reg property in sound node. >> -- Rebased on top of latest kernel tip. >> Changes Since V6: >> -- Modify link-names and audio routing in a sound node. >> -- Move amp_en pin control node to appropriate consumer patch. >> -- Split patches as per digital macro codecs and board specific codecs and sort it. >> -- Modify label and node names to lpass specific. >> Changes Since V5: >> -- Move soc specific bolero digital codec nodes to soc specific file. >> -- Bring wcd938x codec reset pin control and US/EURO HS selection nodes from other series. >> -- Change node name and remove redundant status property in sound node. >> Changes Since V4: >> -- Update nodes in sorting order. >> -- Update DTS node names as per dt-bindings. >> -- Update Node properties in proper order. >> -- Update missing pinctrl properties like US/EURO HS selection, wcd reset control. >> -- Remove redundant labels. >> -- Remove unused size cells and address cells in tx macro node. >> -- Keep all same nodes at one place, which are defined in same file. >> -- Add max98360a codec node to herobrine board specific targets. >> Changes Since V3: >> -- Move digital codec macro nodes to board specific dtsi file. >> -- Update pin controls in lpass cpu node. >> -- Update dependency patch list. >> -- Create patches on latest kernel. >> Changes Since V2: >> -- Add power domains to digital codec macro nodes. >> -- Change clock node usage in lpass cpu node. >> -- Add codec mem clock to lpass cpu node. >> -- Modify the node names to be generic. >> -- Move sound and codec nodes to root node. >> -- sort dai links as per reg. >> -- Fix typo errors. >> Changes Since V1: >> -- Update the commit message of cpu node patch. >> -- Add gpio control property to support Euro headset in wcd938x node. >> -- Fix clock properties in lpass cpu and digital codec macro node. >> >> Srinivasa Rao Mandadapu (12): >> arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital >> macro codecs >> arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD >> 1.0/2.0 and IDP boards >> arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD >> 3.0/3.1 >> arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 1.0/2.0 and >> IDP boards >> arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 3.0/3.1 >> arm64: dts: qcom: sc7280: Add max98360a codec for CRD 1.0/2.0 and IDP >> boards >> arm64: dts: qcom: sc7280: herobrine: Add max98360a codec node >> arm64: dts: qcom: sc7280: Add lpass cpu node >> arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 1.0/2.0 and >> IDP boards. >> arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 3.0/3.1 >> arm64: dts: qcom: sc7280: Add sound node for CRD 1.0/2.0 and IDP >> boards >> arm64: dts: qcom: sc7280: Add sound node for CRD 3.0/3.1 >> >> arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 37 ++++ >> .../dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi | 155 +++++++++++++++ >> arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 8 + >> arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 216 +++++++++++++++++++++ >> arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 73 +++++++ >> arch/arm64/boot/dts/qcom/sc7280.dtsi | 190 ++++++++++++++++++ >> 6 files changed, 679 insertions(+) >> >> -- >> 2.7.4 >>
On Thu, 7 Jul 2022 18:52:52 +0530, Srinivasa Rao Mandadapu wrote: > This patch set is to add bolero digital macros, WCD and maxim codecs nodes > for audio on sc7280 based platforms. > > This patch set depends on: > [LPASS DTS: wcd related pinmux reorg] > -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=657389 > [Clock DTS: reset control changes] > -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=638002 > [Clock: External MCLK and reset control driver changes] > -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=650267 > [Clock DTS: lpasscc node disable and lpasscore node name changes] > -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=657325 > > [...] Applied, thanks! [01/12] arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital macro codecs commit: 12ef689f09abb50f0862c8e08138dd45cbf27233 [02/12] arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 1.0/2.0 and IDP boards commit: d3219de8bcebe4057696a2f99ce90c8812114c78 [03/12] arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 3.0/3.1 commit: d5a959f96be1b27c81d6197d66624cd6cc146fe6 [04/12] arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 1.0/2.0 and IDP boards commit: f8b4eb64f2003e0a1fa5011009955d46f90af285 [05/12] arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 3.0/3.1 commit: 0a3a56a93fd96cb3e3d42778f275e91750c242a7 [06/12] arm64: dts: qcom: sc7280: Add max98360a codec for CRD 1.0/2.0 and IDP boards commit: d6c006f510d9f29ff78761bb3ef50f14ebc05b7b [07/12] arm64: dts: qcom: sc7280: herobrine: Add max98360a codec node commit: 14afeaf917375967bb84b4347cd8e4156b84c470 [08/12] arm64: dts: qcom: sc7280: Add lpass cpu node commit: aee6873edb93a3919706f70884e55880d8c727a5 [09/12] arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 1.0/2.0 and IDP boards. commit: 8cf4133bc1fbb6fbc695e4398b940caf3ec59ba5 [10/12] arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 3.0/3.1 commit: f10c73ac6e90ca2343fc4f06b61ce8c1824c9bfd [11/12] arm64: dts: qcom: sc7280: Add sound node for CRD 1.0/2.0 and IDP boards commit: ece7d81f2447f4fd4f5d5345e921036871babf2b [12/12] arm64: dts: qcom: sc7280: Add sound node for CRD 3.0/3.1 commit: 29e0b604f040ef794cd36d43b97bd9c040ed99e6 Best regards,
This patch set is to add bolero digital macros, WCD and maxim codecs nodes for audio on sc7280 based platforms. This patch set depends on: [LPASS DTS: wcd related pinmux reorg] -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=657389 [Clock DTS: reset control changes] -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=638002 [Clock: External MCLK and reset control driver changes] -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=650267 [Clock DTS: lpasscc node disable and lpasscore node name changes] -- https://patchwork.kernel.org/project/linux-arm-msm/list/?series=657325 Changes Since V13: -- Move digital codecs enabling to separate wcd specific dtsi file in CRD 3.0+ patches. -- Remove redundant output high setting in wcd reset node. -- Revert external mclk name. -- Update dependency list. -- Rebase as per latest kernel repository. Changes Since V12: -- Update 'lpasscore' clock node name to lpass_core to match latest clock patches. -- Update external mclk0 name and it's source node. -- Move sound node to separate wcd specific dtsi file. -- Move CRD specific lpass_cpu node Enabling to separate wcd specific dtsi file. -- Update dependency list. Changes Since V11: -- Remove output-low pinconf setting in wcd-reset-n-sleep node. -- Update dependency list. Changes Since V10: -- Modify digital macro codecs pin control labels. -- Updated dependency list. Changes Since V9: -- Move wcd codec and digital codec nodes to sc7280-qcard file. -- Modify the reg property as per link number in sound node. -- Fix the us-euro pin control usage in wcd codec node. -- Move wcd pin control nodes to specific crd board files. -- Sort max98360a codec node in alphabetical order. -- Modify the commit messages. Changes Since V8: -- Split patches as per sc7280 CRD revision 3, 4 and 5 boards. -- Add corresponding dt nodes for herobrine crd boards. -- Update dai-link node names as per dt-bindings in sound node. -- Add reg property in sound node as per dt-bindings which was removed in previous series. -- Fix typo errors. -- Update wcd codec pin control properties in board specific files. Changes Since V7: -- Remove redundant interrupt names in soundwire node. -- Fix typo errors. -- Remove redundant reg property in sound node. -- Rebased on top of latest kernel tip. Changes Since V6: -- Modify link-names and audio routing in a sound node. -- Move amp_en pin control node to appropriate consumer patch. -- Split patches as per digital macro codecs and board specific codecs and sort it. -- Modify label and node names to lpass specific. Changes Since V5: -- Move soc specific bolero digital codec nodes to soc specific file. -- Bring wcd938x codec reset pin control and US/EURO HS selection nodes from other series. -- Change node name and remove redundant status property in sound node. Changes Since V4: -- Update nodes in sorting order. -- Update DTS node names as per dt-bindings. -- Update Node properties in proper order. -- Update missing pinctrl properties like US/EURO HS selection, wcd reset control. -- Remove redundant labels. -- Remove unused size cells and address cells in tx macro node. -- Keep all same nodes at one place, which are defined in same file. -- Add max98360a codec node to herobrine board specific targets. Changes Since V3: -- Move digital codec macro nodes to board specific dtsi file. -- Update pin controls in lpass cpu node. -- Update dependency patch list. -- Create patches on latest kernel. Changes Since V2: -- Add power domains to digital codec macro nodes. -- Change clock node usage in lpass cpu node. -- Add codec mem clock to lpass cpu node. -- Modify the node names to be generic. -- Move sound and codec nodes to root node. -- sort dai links as per reg. -- Fix typo errors. Changes Since V1: -- Update the commit message of cpu node patch. -- Add gpio control property to support Euro headset in wcd938x node. -- Fix clock properties in lpass cpu and digital codec macro node. Srinivasa Rao Mandadapu (12): arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital macro codecs arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 1.0/2.0 and IDP boards arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 3.0/3.1 arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 1.0/2.0 and IDP boards arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 3.0/3.1 arm64: dts: qcom: sc7280: Add max98360a codec for CRD 1.0/2.0 and IDP boards arm64: dts: qcom: sc7280: herobrine: Add max98360a codec node arm64: dts: qcom: sc7280: Add lpass cpu node arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 1.0/2.0 and IDP boards. arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 3.0/3.1 arm64: dts: qcom: sc7280: Add sound node for CRD 1.0/2.0 and IDP boards arm64: dts: qcom: sc7280: Add sound node for CRD 3.0/3.1 arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 37 ++++ .../dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi | 155 +++++++++++++++ arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 8 + arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 216 +++++++++++++++++++++ arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 73 +++++++ arch/arm64/boot/dts/qcom/sc7280.dtsi | 190 ++++++++++++++++++ 6 files changed, 679 insertions(+)