mbox series

[v5,00/10] Add PSR support for eDP

Message ID 1657532880-12897-1-git-send-email-quic_vpolimer@quicinc.com (mailing list archive)
Headers show
Series Add PSR support for eDP | expand

Message

Vinod Polimera July 11, 2022, 9:47 a.m. UTC
Changes in v2:
  - Use dp bridge to set psr entry/exit instead of dpu_enocder.
  - Don't modify whitespaces.
  - Set self refresh aware from atomic_check.
  - Set self refresh aware only if psr is supported.
  - Provide a stub for msm_dp_display_set_psr.
  - Move dp functions to bridge code.

Changes in v3:
  - Change callback names to reflect atomic interfaces.
  - Move bridge callback change to separate patch as suggested by Dmitry.
  - Remove psr function declaration from msm_drv.h.
  - Set self_refresh_aware flag only if psr is supported.
  - Modify the variable names to simpler form.
  - Define bit fields for PSR settings.
  - Add comments explaining the steps to enter/exit psr.
  - Change DRM_INFO to drm_dbg_db. 

Changes in v4:
  - Move the get crtc functions to drm_atomic.
  - Add atomic functions for DP bridge too.
  - Add ternary operator to choose eDP or DP ops.
  - Return true/false instead of 1/0.
  - mode_valid missing in the eDP bridge ops.
  - Move the functions to get crtc into drm_atomic.c.
  - Fix compilation issues.
  - Remove dpu_assign_crtc and get crtc from drm_enc instead of dpu_enc.
  - Check for crtc state enable while reserving resources.

Changes in v5:
  - Move the mode_valid changes into a different patch.
  - Complete psr_op_comp only when isr is set.
  - Move the DP atomic callback changes to a different patch.
  - Get crtc from drm connector state crtc.
  - Move to separate patch for check for crtc state enable while
reserving resources.

Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com>
Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>

Vinod Polimera (10):
  drm/msm/disp/dpu1: clear dpu_assign_crtc and get crtc from connector
    state instead of dpu_enc
  drm: add helper functions to retrieve old and new crtc
  drm/msm/dp: use atomic callbacks for DP bridge ops
  drm/msm/dp: Add basic PSR support for eDP
  drm/msm/dp: use the eDP bridge ops to validate eDP modes
  drm/bridge: use atomic enable/disable callbacks for panel bridge
  drm/bridge: add psr support for panel bridge callbacks
  drm/msm/disp/dpu1: use atomic enable/disable callbacks for encoder
    functions
  drm/msm/disp/dpu1: add PSR support for eDP interface in dpu driver
  drm/msm/disp/dpu1: check for crtc enable rather than crtc active to
    release shared resources

 drivers/gpu/drm/bridge/panel.c              |  68 ++++++++--
 drivers/gpu/drm/drm_atomic.c                |  60 +++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c    |  17 ++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c |  55 +++++---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h |   8 --
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c     |   2 +-
 drivers/gpu/drm/msm/dp/dp_catalog.c         |  81 ++++++++++++
 drivers/gpu/drm/msm/dp/dp_catalog.h         |   4 +
 drivers/gpu/drm/msm/dp/dp_ctrl.c            |  73 +++++++++++
 drivers/gpu/drm/msm/dp/dp_ctrl.h            |   3 +
 drivers/gpu/drm/msm/dp/dp_display.c         |  31 +++--
 drivers/gpu/drm/msm/dp/dp_display.h         |   2 +
 drivers/gpu/drm/msm/dp/dp_drm.c             | 187 ++++++++++++++++++++++++++--
 drivers/gpu/drm/msm/dp/dp_drm.h             |   9 +-
 drivers/gpu/drm/msm/dp/dp_link.c            |  36 ++++++
 drivers/gpu/drm/msm/dp/dp_panel.c           |  22 ++++
 drivers/gpu/drm/msm/dp/dp_panel.h           |   6 +
 drivers/gpu/drm/msm/dp/dp_reg.h             |  27 ++++
 include/drm/drm_atomic.h                    |   7 ++
 19 files changed, 634 insertions(+), 64 deletions(-)

Comments

Dmitry Baryshkov July 11, 2022, 10:07 a.m. UTC | #1
On 11/07/2022 12:47, Vinod Polimera wrote:
> Changes in v2:
>    - Use dp bridge to set psr entry/exit instead of dpu_enocder.
>    - Don't modify whitespaces.
>    - Set self refresh aware from atomic_check.
>    - Set self refresh aware only if psr is supported.
>    - Provide a stub for msm_dp_display_set_psr.
>    - Move dp functions to bridge code.
> 
> Changes in v3:
>    - Change callback names to reflect atomic interfaces.
>    - Move bridge callback change to separate patch as suggested by Dmitry.
>    - Remove psr function declaration from msm_drv.h.
>    - Set self_refresh_aware flag only if psr is supported.
>    - Modify the variable names to simpler form.
>    - Define bit fields for PSR settings.
>    - Add comments explaining the steps to enter/exit psr.
>    - Change DRM_INFO to drm_dbg_db.
> 
> Changes in v4:
>    - Move the get crtc functions to drm_atomic.
>    - Add atomic functions for DP bridge too.
>    - Add ternary operator to choose eDP or DP ops.
>    - Return true/false instead of 1/0.
>    - mode_valid missing in the eDP bridge ops.
>    - Move the functions to get crtc into drm_atomic.c.
>    - Fix compilation issues.
>    - Remove dpu_assign_crtc and get crtc from drm_enc instead of dpu_enc.
>    - Check for crtc state enable while reserving resources.
> 
> Changes in v5:
>    - Move the mode_valid changes into a different patch.
>    - Complete psr_op_comp only when isr is set.
>    - Move the DP atomic callback changes to a different patch.
>    - Get crtc from drm connector state crtc.
>    - Move to separate patch for check for crtc state enable while
> reserving resources.
> 
> Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
> Signed-off-by: Kalyan Thota <quic_kalyant@quicinc.com>
> Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
> 
> Vinod Polimera (10):
>    drm/msm/disp/dpu1: clear dpu_assign_crtc and get crtc from connector
>      state instead of dpu_enc

Generic comment: please use 'drm/msm/dpu:' prefix instead.

>    drm: add helper functions to retrieve old and new crtc
>    drm/msm/dp: use atomic callbacks for DP bridge ops
>    drm/msm/dp: Add basic PSR support for eDP
>    drm/msm/dp: use the eDP bridge ops to validate eDP modes
>    drm/bridge: use atomic enable/disable callbacks for panel bridge
>    drm/bridge: add psr support for panel bridge callbacks
>    drm/msm/disp/dpu1: use atomic enable/disable callbacks for encoder
>      functions
>    drm/msm/disp/dpu1: add PSR support for eDP interface in dpu driver
>    drm/msm/disp/dpu1: check for crtc enable rather than crtc active to
>      release shared resources
> 
>   drivers/gpu/drm/bridge/panel.c              |  68 ++++++++--
>   drivers/gpu/drm/drm_atomic.c                |  60 +++++++++
>   drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c    |  17 ++-
>   drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c |  55 +++++---
>   drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h |   8 --
>   drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c     |   2 +-
>   drivers/gpu/drm/msm/dp/dp_catalog.c         |  81 ++++++++++++
>   drivers/gpu/drm/msm/dp/dp_catalog.h         |   4 +
>   drivers/gpu/drm/msm/dp/dp_ctrl.c            |  73 +++++++++++
>   drivers/gpu/drm/msm/dp/dp_ctrl.h            |   3 +
>   drivers/gpu/drm/msm/dp/dp_display.c         |  31 +++--
>   drivers/gpu/drm/msm/dp/dp_display.h         |   2 +
>   drivers/gpu/drm/msm/dp/dp_drm.c             | 187 ++++++++++++++++++++++++++--
>   drivers/gpu/drm/msm/dp/dp_drm.h             |   9 +-
>   drivers/gpu/drm/msm/dp/dp_link.c            |  36 ++++++
>   drivers/gpu/drm/msm/dp/dp_panel.c           |  22 ++++
>   drivers/gpu/drm/msm/dp/dp_panel.h           |   6 +
>   drivers/gpu/drm/msm/dp/dp_reg.h             |  27 ++++
>   include/drm/drm_atomic.h                    |   7 ++
>   19 files changed, 634 insertions(+), 64 deletions(-)
>