mbox series

[v5,0/3] PCI: qcom: ep: Add basic interconnect support

Message ID 1687827692-6181-1-git-send-email-quic_krichai@quicinc.com (mailing list archive)
Headers show
Series PCI: qcom: ep: Add basic interconnect support | expand

Message

Krishna Chaitanya Chundru June 27, 2023, 1:01 a.m. UTC
Add basic support for managing "pcie-mem" interconnect path by setting
a low constraint before enabling clocks and updating it after the link
is up based on link speed and width the device got enumerated.

changes from v4:
	- rebased with linux-next.
	- Added comments as suggested by mani.
	- removed the arm: dts: qcom: sdx55: Add interconnect path
	  as that patch is already applied.
changes from v3:
        - ran make DT_CHECKER_FLAGS=-m dt_binding_check and fixed
         errors.
        - Added macros in the qcom ep driver patch as suggested by Dmitry
changes from v2:
        - changed the logic for getting speed and width as suggested
         by bjorn.
        - fixed compilation errors.


Krishna chaitanya chundru (3):
  dt-bindings: PCI: qcom: ep: Add interconnects path
  arm: dts: qcom: sdx65: Add interconnect path
  PCI: qcom-ep: Add ICC bandwidth voting support

 .../devicetree/bindings/pci/qcom,pcie-ep.yaml      | 13 ++++
 arch/arm/boot/dts/qcom/qcom-sdx65.dtsi             |  3 +
 drivers/pci/controller/dwc/pcie-qcom-ep.c          | 73 ++++++++++++++++++++++
 3 files changed, 89 insertions(+)